Ti Clad Copper bus bar -TiCu Clad Electrodes -Titanium Clad Copper Electrodes Carry High Current In Corrosive Processes
![]()
![]()
TiCu Clad – titanium Clad bars are made by using compound extrusion presses which ensures an optimal metallurgical bond between the copper core and the titanium coating.
The TiCu Clad material is generally used in electrochemistry, in chlor-alkaline electrolysis, in galvanizing lines, in chromium-plating baths and wherever high corrosion protection and high current-carrying capacities are required.
Applications
-
Dimensionally stable anode in chlor-alkaline-electrolysis
-
Busbars for supplying current in elecctro-zinc coating lines for strip products
-
Busbars for supplying current in galvanizing lines for steel strips
-
Busbars for supplying current in continuous coating lines for wire, tube and strip plating
-
Busbars for supplying current in galvanic baths, printed circuit board industry, frames, support bars
-
Busbars and anodes for the metal finishing industry
-
Busbars for supplying current in electrolysis plants/metal recovery
-
Coated titanium anode for chromium-plating instead of conventional lead anodes
-
Copper foil production
-
Electrodes for cathodic protection in corrosion systems
Environmentally friendly chromium-plating with TiCu Clad anodes
Using TiCu Clad anodes, platinated with titanium in the micron range, has a distinct advantage when chromium plating in sulphuric acid electrolytes. Due to increasingly more strict environmental standards as well as expensive waste disposal, the market requires processes which allow a more environmentally friendly hard- and bright chromium-plating in fluoride-free electrolytes.
TiCu Clad process is a process that eliminates production of hazardous waste such as lead chromate which is usually produced during the chrome-plating.
Standards
Coat titanium, material-No. 37025 or 3.7035, DIN 17850, ASTM B 265 Grade 1 or 2
Core material acc. to EN 13601, CU-HCP, CW021A, ANSI / ASTM B 244, UNS No.C 10300
Electric conductivity
Cu-HCP ≥99 % IACS 58 MS/m
General informationen
Relation to copper
| Titanium |
|
1 : 26 at 20° C
1 : 66 at 400° C |
| Stainless steel |
|
1 : 42 |
| TiAI6V4 |
|
1 : 100 |
Material
| Material |
|
Electrical conductivity in mS / m |
| Titanium / Cu on titanium |
|
2.153 |
| Titanium grade 2 1.5 mm sheet |
|
2.110 |
| Titanium grade 2 |
|
2.240 |
| TiAI VT 01 12.7 x 6.3 mm |
|
1.645 |
| TiAI VT 01 25.4 x 12.7 mm |
|
1.819 |
| TiAI6V4 |
|
0.58 |
| |
|
|
| Copper |
|
58.0 |
| CuCoBe |
|
30.0 |
| CuCrZr |
|
49.0 |
| W/Cu 75/25 |
|
19 – 24.0 |
| CuP6 |
|
4.0 |
| AI |
|
28.65 |
| AIMgCuPb |
|
20.45 |
| Stainless steel |
|
1.3 |
| Form |
|
Dimension in mm |
|
Dimension in Zoll (inch) |
| Round |
|
6,35 - 44,45 mm |
|
¼” - 1 ¾” |
| 4-kt |
|
up to 38 mm |
|
up to 1 ½” x 1 ½ |
| Rectangle – flat |
|
up to 20 x 120 mm |
|
up to 0.8' x 4 “ |
| Wire |
|
0,75 – 6,35 mm |
|
0,030' – 1/4' |
Other dimensions on request.TiCu Clad can be cut to length depending on customer’s request.
| Compound extrusion pressed bars |
|
Explosion-platinated sheets |
| Zirconium Clad copper |
|
Zirconium – Copper |
| Niobium Clad copper |
|
Niobium - Copper |
| Nickel Clad copper |
|
Nickel - Copper |
| |
|
Titanium - Copper |
| and a lot of others |
|
and a lot of others |
Precise Heater's offers a line of titanium clad copper rod and bar products using our unique metallurgically bonding process. Anomet Titanium Clad Copper bus bar utilizes CP Titanium metallurgically bonded to an OFHC (Oxygen-Free High Conductivity) Copper Core.
Precise Heater Ti Clad Copper has excellent conductivity and is fully ductile for shaping and forming. Ti Clad Copper also has great weldability for connecting, capping and joining. Precise Heater's custom processing methods allow for a wider variety of Ti to copper ratios. Specifications for typical configurations are illustrated in the table below.
Precise Heater Ti Clad Copper can be cut to length and packaged to customer requirements.Precise Heater also offers complete metallurgical services for testing and quality control. Bus Bars are also available in with Aluminum (Al Clad Cu), Zirconium (Zr Clad Cu), and Stainless (SS Clad Cu) cladding.
Specifications for PreciseHeater Ti Clad Copper
|
| Round Rod |
1/4" ø - 1 3/4 ø |
| Square |
Up to 1 1/2" x 1 1/2" |
| Rectangle |
Max 4" Width |
| Wire |
0.30" - 0.250" |
| Available Length |
Up to 30' |
| Typical Ti Thickness* |
0.030" - 0.100" |
For more information and pricing on Anomet Ti Clad Copper or other composite metal products offered by PreciseHeater, call, fax or email.
Titanium Clad Copper is sometimes referred to as Ti/Cu, TiCladCu, Ti Clad Copper, Ti-Clad Cu, Ti-Clad Copper,Titanium Coated Copper, Titanium Plated Copper, Titanized Copper.
