PTFE Fluoropolymer Immersion Coil Heat Exchanger For Chemical Processing Tank
PTFE (Fluoropolymer) Immersion Coils for Chemical Processing Tank
| Teflon(Fluorpolymer) Heating and cooling coils | |||||
|
Exchange area Sq.Ft |
Connections Inch |
Length In./mm |
Width In./mm |
Thickness In./mm |
Model No. |
| 5.5 | 3/4 FNPT | 11.5(292) | 11.5(292) | 2(51) | XC-12-12 |
| 11 | 3/4 FNPT | 15.5(394) | 15.5(394) | 2(51) | XC-16-16 |
| 16.5 | 3/4 FNPT | 17.5(445) | 17.5(445) | 2.36(60) | XC-18-18 |
| 22 | 3/4 FNPT | 19.7(500) | 15.7(400) | 2.36(60) | XC-20-16 |
| 27.5 | 3/4 FNPT | 19.7(500) | 19.7(500) | 2.36(60) | XC-20-20 |
| 33 | 3/4 FNPT | 23.5(597) | 23.5(597) | 2.36(60) | XC-24-24 |
| 38.5 | 3/4 FNPT | 27.5(700) | 23.5(597) | 2.36(60) | XC-28-24 |
| 44 | 3/4 FNPT | 27.5(700) | 27.5(700) | 2.76(70) | XC-28-28 |
| 49.5 | 3/4 FNPT | 31.5(800) | 31.5(800) | 2.76(70) | XC-32-32 |
| 55 | 1 FNPT | 33.9(860) | 33.9(860) | 2.76(70) | XC-34-34 |
| 60.5 | 1 FNPT | 35.5(900) | 31.5(800) | 2.76(70) | XC-36-32 |
| 66 | 1 FNPT | 35.5(900) | 33.9(860) | 2.76(70) | XC-36-34 |
| 71.5 | 1 FNPT | 35.5(900) | 35.5(900) | 2.76(70) | XC-36-36 |
| 77 | 1 FNPT | 39.5(1000) | 33.9(860) | 3.15(80) | XC-40-34 |
| 83.5 | 1 FNPT | 39.5(1000) | 35.5(900) | 3.15(80) | XC-40-36 |
| 89 | 1 FNPT | 39.5(1000) | 39.5(1000) | 3.15(80) | XC-40-40 |
| 94.5 | 1 FNPT | 39.5(1000) | 39.5(1000) | 3.15(80) | XC-41-41 |
| 99 | 1 FNPT | 43.3(1100) | 39.5(1000) | 3.15(80) | XC-43-40 |
| 104 | 1-1/2 FNPT | 43.3(1100) | 39.5(1000) | 3.54(90) | XC-44-40 |
| 110 | 1-1/2 FNPT | 45.3(1150) | 39.5(1000) | 3.54(90) | XC-45-40 |
| 115 | 1-1/2 FNPT | 47.2(1200) | 39.5(1000) | 3.54(90) | XC-47-40 |
| 120 | 1-1/2 FNPT | 47.2(1200) | 39.5(1000) | 3.54(90) |
XC-48-41 |
Materials of Construction
Our materials of construction for the Immersion Coil Heat Exchanger consists of either polypropylene, PVDF, or PTFE for the frame, and either FEP, PFA, or PTFE for the tubing. Custom designs may include other fluoropolymer materials such as ETFE, ECTFE or PCTFE.
Advantages
The advantages of our heat exchanger products over alternative designs include:
Low operating cost - The operating cost includes maintenance such as inspection, cleaning, downtime, and repair. This is primarily due to the relatively simple design that involves no plastic welding joints
.
Custom exchange area and size are available
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.