3TPI 4TPI Nipple UHP 600mm Graphite Electrode For Electric Arc Furnace
UHP 600mm Graphite Electrode
Grade: UHP
Applicable furnace: EAF
Length: 2100mm/2400mm/2700mm
Nipple: 3TPI/4TPI
Shipping Term: EXW/FOB/CIF
Payment: T/T; L/C
MOQ: 10 ton
- Product Details
Compared with HP and RP electrodes, UHP graphite electrodes have more advantages as follows:
* Lower electrical resistivity, the lower the resistivity, the better the conductivity and consumption
* Heat tolerance and oxidation resistance, reducing physical and chemical loss in practice, especially at high temperature in practice.
* Smaller coefficient of thermal expansion,the lower the coefficient, the stronger the thermal stability of the product and the higher the oxidation resistance.
* Low ash content, which will get oxidation resistance improved much.
| Properties | Position | Unit | UHP | |
| 300-600mm | 650-800mm | |||
| Specific Resistance | Body | m | 4.8-5.8 | 4.6-5.8 |
| Nipple | 3.8-4.5 | 3.8-4.5 | ||
| Bending Strengh | Body | Mpa | 10.0-14.0 | 10.0-14.0 |
| Nipple | 20.0-26.0 | 20.0-26.0 | ||
| Young's Modulus | Body | Gpa | 9.0-13.0 | 10.0-14.0 |
| Nipple | 15.0-18.0 | 15.0-18.0 | ||
| Bulk Density | Body | g/cm3 | 1.68-1.74 | 1.70-1.74 |
| Nipple | 1.77-1.82 | 1.78-1.84 | ||
| CTE(100-600°C) | Body | ×10 -6/C | 1.1-1.4 | 1.1-1.4 |
| Nipple | 0.9-1.2 | 0.9-1.2 |
For the purpose of reducing electrode consumption and improving production efficiency, we should make furnace capacity, transformer capacity and graphite electrode match with each other in a reasonable proportion, the following chart shows the relation among them for your reference.
|
Furnace |
Graphite Electrode Diameter(mm) |
Graphite Electrode Diameter(mm) |
|||
|
Capacity(t) |
Diameter(m) |
RP |
HP |
UHP |
|
|
10 |
3.35 |
5 |
7.5 |
10 |
300/350 |
|
15 |
3.65 |
6 |
10 |
12 |
350 |
|
20 |
3.95 |
7.5 |
12 |
15 |
350/400 |
|
25 |
4.3 |
10 |
15 |
18 |
400 |
|
30 |
4.6 |
12 |
18 |
22 |
400/450 |
|
40 |
4.9 |
15 |
22 |
27 |
450 |
|
50 |
5.2 |
18 |
25 |
30 |
450 |
|
60 |
5.5 |
20 |
27 |
35 |
500 |
|
70 |
6.8 |
22 |
30 |
40 |
500 |
|
80 |
6.1 |
25 |
35 |
45 |
500 |
|
100 |
6.4 |
27 |
40 |
50 |
500 |
|
120 |
6.7 |
30 |
45 |
60 |
550/600 |
|
150 |
7 |
35 |
50 |
70 |
600 |
|
170 |
7.3 |
/ |
60 |
80 |
600 |
|
200 |
7.6 |
/ |
70 |
100 |
600/700 |
|
250 |
8.2 |
/ |
/ |
120 |
700 |
|
300 |
8.8 |
/ |
/ |
150 |
700 |
Low electrical resistance
High conductivity
Strong chemical stability
High resistance to oxidation and thermal shock
High machining accuracy, good surface finishing
* DC electric arc furnace.
* Ladle furnace.
* AC electric arc furnace.
* Submerged arc furnace.
Manufacturing process
Graphite electrode production is a complicted process, usually it have to get through calcinations, kneading, forming, baking, graphitizing and machining, finally to be finished products, shipped to customers after careful package.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.