HFW Serrated Finned Tubes ASME SA213 T22 With CS Fins For Heat Exchanger Equipment
HFW Serrated Finned Tubes ASME SA213 T22 With CS Fins For Heat Exchanger Equipment
ASME SA213 / ASTM A213 specification for seamless ferritic and austenitic alloy steel boler, superheater, and heat exchanger tubes. Grade T22 is a chromium-molybdenum (Cr-Mo) alloy steel. T22 material has high-temperature performance,good creep resistance and oxidation resistance due to chromium and molybdenum content.
Chemical Composition (%) K21590
| Grade | C | Mn | P | S | Si | Cr | Mo |
| T22 | 0.05-0.15 | 0.30-0.60 | 0.025 | 0.025 | 0.50 | 1.90-2.60 | 0.87-1.13 |
Mechanical Properties K21590
| Grade | Tensile Strength,min | Yield Strength (0.2%Offset,min) |
| 60ksi (415 MPa) | 30ksi (205 MPa) | |
| T22 | Elongation min. % | Heat Treating Temperature min. |
| 30 | 1250°F [675°C] |
SA213 T22 alloy steel tubes are widely applied in heat exchangers, boilers, and pressure vesselsdue to their high-temperature strength, corrosion resistance, and durability. T22 tubes are a ideal choice for industries like power plants, petrochemicals, and oil & gas.
ASME SA213 T22 alloy steel HFW (High Frequency Welded) serrated finned tubes are designed to enhance heat transfer efficiency in high-temperature and high-pressure applications. These finned tubes are widely used in oil and gas projects or power plant projects, such as heat exchangers, boilers, air coolers, and economizers where maximizing surface area and thermal performance is critical.
SA213 T22 material provides excellent creep resistance and oxidation resistance at high temperature.Thus suitable for boilers, superheaters, and heat recovery systems in power plants and refineries.
SA213 T22 material has durability in harsh environments, chromium-molybdenum (Cr-Mo) alloy resists corrosion, scaling, and sulfur attack in aggressive flue gas conditions.Serrated fins disrupt laminar flow, minimizing ash and particulate buildup, so it's ideal for coal-fired plants and waste heat recovery.
Applications in Heat Exchanger Equipment
Economizers
Boilers & Superheaters
Waste Heat Recovery Units (WHRU)
Air-Cooled Heat Exchangers (ACHE)
HRSG (Heat Recovery Steam Generators)
Specifications
| Type | Description | Base tube | Fin specification (mm) | ||
| O.D. (mm) | Fin pitch | Fin height | Fin thick | ||
| Embedded | G-type fin tube | 16-63 | 2.1-5 | <17 | ~0.4 |
| Extruded | Single metal / Combined metal | 8-51 | 1.6-10 | <17 | 0.2-0.4 |
| Low fin tube / T-type fin tube | 10-38 | 0.6-2 | <1.6 | ~0.3 | |
| Bamboo tube / corrugated tube | 16-51 | 8-30 | <2.5 | ~0.3 | |
| Wound | L / KL / LL type fin tube | 16-63 | 2.1-5 | <17 | ~0.4 |
| String | String fin tube | 25-38 | 2.1-3.5 | <20 | 0.2-0.5 |
| U-type | U-type fin tube | 16-38 | / | / | / |
| Welding | HF-welding fin tube | 16-219 | 3-25 | 5-30 | 0.8-3 |
| H/HH type fin tube | 25-63 | 8-30 | <200 | 1.5-3.5 | |
| Serrated spiral fin tube | 25-219 | 2-7 | <38.1 | 0.9-2.0 | |
| Studed fin tube | 25-219 | 8-30 | 5-35 | φ5-20 |
|
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.