KDW-3582 Two-Component Silicone Potting Compound 1:1 Ratio with 0.8 W/mK Thermal Conductivity and UL94V-0 Rating

KDW-3582 two-component silicone potting compound provides superior waterproof protection and thermal management for electronic components. This 1:1 mix ratio material offers excellent electrical insulation and thermal conductivity up to 0.8 W/mK.

• Two-component addition-cure silicone with 1:1 mix ratio
• Low viscosity (4700 mpa*s) for easy processing and excellent flow
• High thermal conductivity (0.8 W/mK) for effective heat dissipation
• Excellent electrical insulation with volume resistivity ≥1×10¹⁴ Ω·cm
• UL94V-0 flame retardant rating for enhanced safety
• Operating temperature range from -50°C to +250°C
• Minimal linear shrinkage (≤0.5%) and no corrosion
• Superior waterproof, dampproof, and weather resistance

• Automotive electronics modules and control systems
• Power control modules and electrical components
• Solar panel junction boxes and renewable energy systems
• LED screens, wall washers, and lighting modules
• Electronic components requiring waterproof protection

Weigh components A and B in 1:1 ratio, mix thoroughly, and inject into components requiring protection. For optimal results, inject along one side to minimize air bubbles. Cures at room temperature with elasticity developing within 1-6 hours.

Standard packaging: 25kg plastic drums for both components A and B. Custom packaging available. Store in cool, dry conditions away from direct light and heat. Shelf life: 1 year at 25°C.