No Corrosion Rtv Potting Compound For Solar Panel Module Junction Box
Excellent thermal conduction rtv silicone Adhesive encapsulant for solar panel module junction box
Performance.
KDW-3582 (6:1) is used on all kinds of components of potting sealing and protection. It can be deeply cured, and with good liquidity, UV resistance, weather resistance, rain resistance and dirt resistance after mixed. And it can serve for a long time on outdoor products of fixation, waterproof, dustproof and anticreep.
Application.
2. Power control module;
3. Solar panels junction box LED screen;
4. LED wall washer, LED module, etc.
Characters.
2. Low viscosity, easy to process, strong maneuverability;
3. Low shrinkage rate, no corrosion, no stress;
4. Excellent high temperature electrical insulation, thermal conductivity and stability;
5. Good waterproof and dampproof performance.
Packing.
1. Avoid light, heat, and keep sealing(could be transported and stored as non-dangerous goods )
2. Both shelf life are 1 year at 25℃.
Storage and transportation.
1. Avoid light, heat, and keep sealing(could be transported and stored as non-dangerous goods )
2. Both shelf life are 1 year at 25℃.
Operation process.
1. Weighing component A and B according to the ratio of 6:1, stirring evenly after mixed, then inject it to components and module which needed to be potting protected. It would be better to injected along one side of the wall, which can reduce the generation of air bubbles.
2. Placing the sealed component, and it would discharge bubbles by itself, if possible, vacuumizing and defoaming the mixed rubber before potting sealing. Directly cured at room temperature, usually the rubber will have elasticity within 1-6 hours.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.