KDW-3582 Two-Component Silicone Adhesive Glue 6:1 Ratio with 0.4 W/mK Thermal Conductivity for Metal and Wood
KDW-3582 two-component silicone adhesive glue provides excellent thermal conductivity for metal and wood applications. This 6:1 ratio potting compound offers superior protection and sealing for various electronic components and modules.
This condensation-type silicone potting compound delivers deep curing with excellent liquidity, UV resistance, weather resistance, and long-term outdoor durability. It provides reliable fixation, waterproofing, dustproofing, and anti-creep protection.
- Automotive electronics modules
- Power control modules
- Solar panels junction boxes and LED screens
- LED wall washers and LED modules
- Two-component silicone potting compound, condensation type
- Low viscosity for easy processing and strong maneuverability
- Low shrinkage rate with no corrosion and no stress
- Excellent high-temperature electrical insulation and thermal conductivity
- Superior waterproof and dampproof performance
| Property | Uncured | Cured |
|---|---|---|
| Color | White/Black/Gray | Transparent White/Black/Gray |
| Viscosity (mpa*s) | 15000~30000 | 10000~20000 |
| Density (g/cm³) | 1.25~1.35 | 1.20~1.30 |
| Allowable operating time (25℃, min) | ≥15 | |
| Complete cured time (25℃, h) | 6~12 | |
| Tensile strength (Mpa) | ≥1.0 | |
| Elongation (%) | ≥100 | |
| Shore hardness (A) | 30~40 | |
| Volume resistivity (Ω*cm) | ≥1 × 10¹⁴ | |
| Dielectric strength (KV/mm) | ≥15 | |
| Thermal stability (℃) | -60~+200 | |
| Linear shrinkage (%) | ≤0.5 | |
| Thermal conductivity | ≥0.4 | |
| Flame retardant rating | UL94V-0 | |
Component A: 12KG plastic drum
Component B: 5KG plastic drum
Custom packaging available upon request
Store in sealed containers away from light and heat. Can be transported as non-dangerous goods. Shelf life: 1 year at 25℃.
Mix components A and B in 6:1 ratio, stir evenly, then inject into components requiring potting protection. For best results, inject along one side of the wall to minimize air bubbles. Allow to cure at room temperature, typically developing elasticity within 1-6 hours. Vacuum defoaming recommended before potting for optimal results.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.