12T/H Industrial Water Softener System For Animal Husbandry And Poultry Farming
I.Introduction to Automatic Water Softening System
Water softening equipment refers to devices that reduce water hardness. It can remove calcium and magnesium ions from water sources with high hardness, thereby reducing the amount of calcium and magnesium ions in the water. This helps prevent scale buildup in hot water equipment and pipes, improves thermal efficiency, and extends the lifespan of the equipment.
II.Details of Product Description
| Specification | Description |
| Model | HJ-WSAni12T |
| Flow rate | 12T/H |
| Inlet Water Hardness | ≤8 mmol/L |
| Outlet Water Hardness | ≤0.03 mmol/L |
| Working Pressure | 0.2-0.6 MPa |
| Working Temperature | 2-50℃ |
| Free Chlorine in Inlet Water | ≤0.3 mg/L |
| Suspended Solids in Inlet Water | <5 mg/L |
| Iron Content in Inlet Water | 0.3 mg/L |
III.Softening System For Agricultural Irrigation Systems
Hard water can cause livestock to experience discomfort when drinking and digestive problems. Softened water can improve livestock health and reduce farming risks.
IV:Product advantage
V:Project case
VI.FAQ
1. Q: Which machine should I choose?
A: It depends on your raw water quality and your requirements for permeate water.
Usually there are three parts: pretreatment, RO machine, and post treatment. Pretreatment could be UF(ultra filtration)
system,anti-scale dosing system, flocculant dosing system, disinfectant dosing system, water softener, sand filter, carbon
filter,security filter etc. Post treatment could be UV sterilizer, Ozonizer, ClO2 sterilizer, etc. And maybe you need an EDI
system. We will choose proper process according to your raw water quality and permeate water purpose.
A: For pretreatment tanks, we usually use FRP or S.S. The RO frame could be S.S, carbon steel.For pipes, it is usually S.S and
UPVC. We can choose material according to your special requirements.
3. Q: What’s the control method?
A: For pretreatment, you can choose manual or automatic; for the whole system, we use relay, PLC or man-machine interface remote
controld
4. Q: Which spare parts need to change regularly?
A: Filter cartridge in the security filter and RO membranes. For filter cartridge, it needs to change each 3-6 months, and for RO
membrane, you need to change each 1-3 years. It depends on your water quality and how you maintain the machine.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.