High Pressure Solenoid Valve

YSI series 2-way SS piston ( NO ) high pressure solenoid valve DN 15～50mm Technical parameters working medium :liquid,air,light oil(viscosity≤20cst) medium temperature:0 ～ 120 ℃ working pressure:DN15～25 pressure 6～50bar DN32～50 pressure 6～40bar working type:pilot operated Valvebody material:SS304 Sealing material:PTFE interface:G thread NPT thread flange Working voltage:AC220～240V AC110V 50/60Hz 28VA DC24/12V 20W I P65 H degree voltage could be custom made Options: LED light

YSE series 2-way Stainless Steel normally open high pressure solenoid valve 1/4＂ ～ 1＂ high pressure air solenoid valve working principle Normally open: When the coil is energized, the pilot hole is closed, valve chamber and pressurized by the piston return spring throttle thrust, the solenoid valve is closed. When the coil power, the pilot valve by spring return, pilot hole is open, pressure relief valve chamber, the piston on the lower chamber medium pressure to promote the

YSE series 2-way Stainless Steel ( NC ) high pressure solenoid valve 1/4＂ ～ 1＂ YSE-series(NC)high pressure solenoid valve specification table model Orifice size ( mm) interface Cv working pressure(bar) dimension normal order code weight ( Kg) AC 220V DC 24V length×width×height A×B×C ( mm ) Plastic seal AC220V G thread YSE-1 1 1/4＂ or 3/8＂ 0.04 0～250 0～200 44×25×98 YSE-1- AC220V 0.65 YSE-1.5 1.5 0.08 0～160 0～120 44×25×98 YSE-1.5-AC220V 0.65 YSE-2 2 0.15 0～130 0～80 44×25×98 YSE

YSE series 2-way Stainless Steel ( NO ) high pressure solenoid valve 1/4＂ ～ 1＂ The main technical parameters ◆ Body material: stainless steel. ◆ Applicable medium: water, gas, oil, steam, gas, corrosive fluids. ◆ Temperature Range: -100- + 200 ℃. ◆ medium viscosity: less than 50C St (greater than to be customized). ◆ protection performance: waterproof, explosion-proof (Exd IICT5), anti-corrosion. ◆ Wiring: Terminal Block Type; lead type; male. ◆ Control mode: Normally open,

YSI series 2-way stainless steel piston normally open high pressure solenoid valve DN 15～50mm Normally open: When the coil is energized, the pilot hole is closed, valve chamber and pressurized by the piston return spring throttle thrust, the solenoid valve is closed. When the coil power, the pilot valve by spring return, pilot hole is open, pressure relief valve chamber, the piston on the lower chamber medium pressure to promote the solenoid valve is opened. YSI-series(NO

YSE series 2-way Stainless Steel normally closed high pressure solenoid valve 1/4＂ ～ 1＂ normally closed high pressure solenoid valve working principle NC: When the coil is energized, the pilot spool pull the pilot hole is open, the pressure relief valve chamber, the piston on the lower chamber medium pressure to promote the solenoid valve is opened; When the coil power, the pilot valve by spring return, pilot hole is closed, valve chamber and pressurized by the piston return

YSP series 2-way piston stainless steel high pressure solenoid valve DN 15 ～ 50 mm high pressure solenoid valve Structural features Pilot diaphragm, the maximum pressure 6.0M MPa Air Force, Navy ancillary products Compact design and sophisticated appearance, low temperature rise, no noise, no leakage Action in response to the rapid, reliable and high-frequency technology in Germany, export series, quality The medium containing impurities, a filter must be installed before the

YSI series 2-Way stainless steel pilot operated normally closed high pressure solenoid valve DN 15～50mm high pressure solenoid valve Installation Precautions 1, should refer to the product before installation manual, meets your requirements.2, the pipeline should be washed before using a clean, medium dirty filter should be installed to prevent impurities interfere with the normal operation of the solenoid valve.3, the solenoid valve for a long time after the closure, easy to

YSP series 2-way piston high pressure solenoid valve DN 15 ～ 50 mm The main technical parameters ◆ Body material: stainless steel. ◆ Applicable medium: water, gas, oil, steam, gas, corrosive fluids. ◆ Temperature Range: -100- + 200 ℃. ◆ medium viscosity: less than 50C St (greater than to be customized). ◆ protection performance: waterproof, explosion-proof (Exd IICT5), anti-corrosion. ◆ Wiring: Terminal Block Type; lead type; male. ◆ Control mode: Normally open, normally

YSI series 2-Way SS pilot operated ( NC ) high pressure solenoid valve DN 15～50mm high pressure solenoid valve Structural features Pilot diaphragm, the maximum pressure 6.0M MPa Air Force, Navy ancillary products Compact design and sophisticated appearance, low temperature rise, no noise, no leakage Action in response to the rapid, reliable and high-frequency technology in Germany, export series, quality The medium containing impurities, a filter must be installed before the

YSE-200 1inch High Pressure Solenoid Valve SUS304 Nass Coil 160bar Max for High Temperature Base Media ROUND STAR NSF CERTIFIED SOLENOID VALVE Certifications Manufacturing Process Performance Testing Equipment To supply qualified products, each solenoid valve has been tested strictly. Automatic Digital Winding Machine We use automatic digital high-speed winding machine for the production of coil. The machine is characteristic of parallel winding, high precision and high speed

YSE-100 SS304 Nass Coil High Pressure Solenoid Valve 1.6MPA Product Description High performance solenoid valve designed for demanding industrial applications. Medium: Steam, water Type: Normally closed (N/C) Material: Stainless Steel (SS304) High quality Nass coil from Germany Sealer: PTFE for superior durability Technical Specifications Working medium Liquid, gas Fluid temperature -10~80℃ Working type Pilot operated (NC) Working pressure 0-300bar Valve body material SS304