Bently Nevada 3500 System

990-05-XX-01-00 MOD:167577-07 Bently Nevada Vibration Transmitter Description The 990‑05‑XX‑01‑00 belongs to the 990 series of vibration transmitters from Bently Nevada — designed to accept a compatible proximit­y probe (e.g. a 3300 NSv / XL eddy‑current probe + extension cable) and output an industrial‑standard 4–20 mA analog signal proportional to vibration amplitude (peak‑to‑peak).It is a 2‑wire, loop‑powered transmitter, meaning only two conductors are required to power

330101-23-39-10-12-05 Bently Nevada vibration sensor Description The 330101-23-39-10-12-05 is part of Bently Nevada’s 3300 XL 8 mm proximity probe family.As a proximity (eddy-current) probe, it’s used for non-contact measurement of radial shaft displacement, vibration (dynamic changes), and static shaft position — typically on rotating machinery such as turbines, compressors, pumps, motors, etc.The probe converts the change in distance (gap) between its tip and a conductive

990-10-XX-01-05 MOD:165353-01 Bently Nevada Vibration Transmitter Description The 990-10-XX-01-05 is a 2-wire, loop-powered vibration transmitter from Bently Nevada’s “990” series. It is designed to accept input from a compatible proximity probe (specifically the 3300 NSv / 3300 XL family) and output a 4–20 mA analog signal proportional to vibration amplitude — suitable for integration with machinery control, alarm, or protection systems.Intended use: The 990 transmitter is

330908-00-30-10-01-05 Bently Nevada Proximity Probe Description T he 330908-00-30-10-01-05 is part of the 3300 series “NSv / XL” proximity probes — electromagnetic (eddy-current) sensors for non-contact measurement of position, displacement, and vibration of conductive targets (e.g. rotating shafts).The probe converts changes in distance (gap between probe tip and target) into a proportional electrical signal, which is used by associated monitoring equipment (e.g. Proximitor

32000-16-05-08-130-03-02 Bently Nevada Metric Proximity Probe Housing Assemblies Description The “32000-16-05-08-130-03-02” part number encodes a complete configuration: housing + an installed 3300 XL 8 mm proximity probe + specified cable length, adapter/standoff, penetration depth, fittings, and mounting thread.The 32000 series housings (along with the related 31000 series) are external-mount housings designed to house and protect a proximity probe (such as a 3300-series

32000-16-05-05-080-03-02 Bently Nevada Proximity Probe Housing Assemblies Description T he 32000-16-05-05-080-03-02 is part of the Bently Nevada “32000” series Metric Proximity Probe Housing Assemblies.It is designed to house and mount a proximity probe (typically a probe from the 3300 XL family) through the casing of a machine, allowing non-contact measurement of rotating machinery parameters (shaft position, radial vibration, speed/Keyphasor, etc.) while providing a durable

330104-01-14-10-01-CN Bently Nevada Proximity Probes Description The 330104-01-14-10-01-CN belongs to the 3300 XL 8 mm Proximity Transducer System.As a proximity (eddy-current) probe, it’s used for non-contact measurement of distance, radial vibration, shaft position, axial/thrust position, and related parameters on rotating machinery or equipment with conductive targets (e.g. shafts).The “8 mm” refers to the probe tip diameter — standard for 3300 XL 8 mm series.The probe is

21000-34-05-15-029-04-02 Bently Nevada proximity probe housing assemblies Description T his is a 21000 series proximity-probe housing assembly (aluminum housing) configured with a 3300 XL 8 mm reverse-mount proximity probe (with connector protector), a short factory cable, and explosion-proof conduit fittings. The 21000 housing family is an all-metal assembly (dome cover, sleeve, O-rings, probe sleeve, thread seal, optional conduit fittings and standoff adapter) intended for

190501-12-99-04 Bently Nevada Velocity Transducer Description T he 190501 Velomitor CT is a piezo-velocity sensor designed to measure vibration velocity of equipment casings (especially cooling-tower and air-cooled heat-exchanger fan assemblies running at or above ~90 rpm). It produces a voltage proportional to vibration velocity in a low-frequency band optimized for fan assemblies, and is usually cabled to a monitoring system or instrument. Frequently Asked Questions of

190501-12-99-04 Bently Nevada Velocity Transducer Description T he 190501 Velomitor CT is a piezo-velocity sensor designed to measure vibration velocity of equipment casings (especially cooling-tower and air-cooled heat-exchanger fan assemblies running at or above ~90 rpm). It produces a voltage proportional to vibration velocity in a low-frequency band optimized for fan assemblies, and is usually cabled to a monitoring system or instrument. Frequently Asked Questions of

330101-00-20-05-02-02 Bently Nevada Sensor Probe Cables Description T he 330101-00-20-05-02-02 belongs to the 3300 XL 8 mm proximity transducer system — meaning it's a proximity probe plus extension cable assembly, not just a probe tip alone.In a full system setup, this assembly connects to a Proximitor® sensor (or “sensor head”) to form a complete eddy-current non-contact displacement / vibration transducer system.The system produces an output voltage proportional to the

330101-00-12-05-02-02 Bently Nevada Proximity Probe Description T he “330101” designation indicates this is part of the Bently Nevada 3300 XL 8 mm Proximity Transducer System.A “proximity probe” (also known as an eddy-current probe or proximity transducer) — it does not touch the measured shaft or conductive part. Instead it senses the distance (clearance, radial position, displacement, or vibration) between its tip and a conductive metal surface (e.g. a rotating shaft,

330103-00-13-05-02-05 Bently Nevada Proximity Probes Description T he part belongs to the Bently Nevada “3300 XL” series of proximity / eddy-current transducer probes.In a complete transducer system, a probe (like yours) is used together with an extension cable and a Proximitor® sensor head.The system outputs a voltage directly proportional to the distance between the probe tip and a conductive surface (e.g. a rotating shaft or metal target).Because of that, these probes are

200350-09-00-01 Bently Nevada Sensor Proximity Description T he widely documented product family with model number prefix 200350 is actually a set of accelerometers (case‑mounted seismic transducers) from Bently Nevada.The “200350 and 200355 Accelerometers” datasheet describes these as piezoelectric sensors that measure acceleration (vibration), not displacement or shaft proximity.Operating conditions: wide temperature range (−54 °C to +121 °C), robust enough for industrial

190501-00-00-04 Bently Nevada Velomitor CT Velocity Transducer Description T he 190501‑00‑00‑04 belongs to the Bently Nevada “Velomitor CT” series — a piezoelectric velocity transducer designed to measure casing (housing) vibration velocity on machinery.“CT” stands for “Cooling Tower” version — this sensor is optimized for low‑frequency vibration, particularly suited for cooling towers, air‑cooled heat‑exchanger fan assemblies, and similar machinery.The transducer uses a 316L

330881-28-04-150-00-02 Bently Nevada Proximity Transducer Description T he 330881‑28‑04‑150‑00‑02 is part of the PROXPAC XL series of proximity transducer assemblies from Bently Nevada.PROXPAC XL assemblies integrate the probe and the sensor into a single self‑contained unit — eliminating the need for a separate extension cable or external Proximitor housing.The housing material for PROXPAC XL is a molded thermoplastic — specifically a glass‑/conductive‑fiber‑reinforced

190501-02-00-05 Bently Nevada Velomitor CT (Cooling Tower) Description T he It is a low‑frequency version of the standard “Velomitor” series, tailored for low‑speed fans (fans running as low as ~ 90 rpm, typical 100–300 rpm) — i.e. slower rotating equipment such as cooling towers, not high‑speed turbines/rotors.The sensor mounts on the equipment casing or fan housing, and measures casing vibration velocity (rather than shaft proximity). This makes it suitable for monitoring

330103-00-04-05-12-05 Bently Nevada Proximity Probes Description T he 330103‑00‑04‑05‑12‑05 is a non‑contact eddy‑current proximity probe from the Bently Nevada 3300 XL 8 mm Proximity Transducer System.Together with a matching extension cable and a “Proximitor” signal conditioner, this probe system converts the distance (gap) between the probe tip and a conductive metal target (e.g. rotating shaft, rotor, bearing housing) into a voltage — enabling both static position

330703-000-050-10-12-05 Bently Nevada Proximity Probe Description T he Bently Nevada 330703 is part of the 3300 XL 11 mm Proximity Transducer System.It can measure both static displacement/position (e.g. shaft centerline or alignment) and dynamic behavior (e.g. vibration, rotor run‑out, oscillation), which makes it widely used for condition monitoring of rotating machinery (turbines, compressors, pumps, motors).The “330703-000-050-10-12-05” (or similar) part number defines a

330101-00-12-10-11-05 Bently Nevada Sensor Probe Cables Description T he 330101‑00‑12‑10‑11‑05 refers to a 3300 XL 8 mm Proximity Probe + extension‑cable assembly (or at least the cable + probe portion) from Bently Nevada’s 3300 XL Proximity Transducer System.The system provides an output voltage proportional to the distance between the probe tip and a conductive (metal) target. This allows both static position measurement (e.g., shaft or rotor position) and dynamic