Soft Magnetic Alloys

HYMU80 Soft Magnetic Shielding Alloy Strip with High Initial Permeability HYMU80 is a FeNi soft magnetic alloy with very high initial permeability. HyMu 80 is suitable for applications across a broad spectrum of applications. Featuring high permeability with low hysteresis loss, the material’s shielding properties make it a suitable option for protecting electronic components against stray or low-frequency magnetic fields. HYMU80 is widely used in magnetic shielding

ASTM A801 UNS K92650 iron-Cobalt High Magnetic Saturation Alloy Round Bar K92650 is a new type of soft magnetic alloy in China even it is already widely introduced by the inventor Carpenter. A-one Alloy is one of the Chinese manufacturers who are able to produce K92650 in forms of strip, wire and round bar. K92650 is a better choice when the fabrication is considered when R30005 is somehow has better permeability and coercive force—even the difference is not big. The magnetic

1J27 is a soft magnetic Alloy in China standard that contains 27 % Co, 0.50 % Cr and balance Fe. During the past two years, A-ONE ALLOY successfully helpd several customers with their applications of 1J27. A-ONE ALLOY is more than a material supplier- we provide also fabrication and heat treatment service as well as technical support. That's why our customers rely on A-ONE ALLOY on their new projects. Size range: Forged round bar: diameter 20-500mm Cold rolled strip: 0.05-2

UNS K92650 Wrought Iron-Cobalt High Magnetic Saturation Alloy K92650 is a rought iron-cobalt alloy used in magnetic components requiring high permeability at and above 15 kG (1.5 T) or high magnetic saturation. ASTM A801 covers material supplied by a producer in the form and physical condition suitable for fabrication into parts that will later be given final heat treatment to achieve the desired magnetic characteristics and, where required, mechanical properties. It covers

Vacoflux27 High Saturation Induction Soft Magnetic Alloy Cold Rolled Strip A-ONE ALLOY supplies Vacoflux27 to customers from worldwide. Vacoflux27 (UNS K92650) is named 1J27 in China. It is a new type of soft magnetic alloy in China even it is already widely introduced by the inventor Carpenter. A-one Alloy is among the several manufacturers who are able to produce Vacoflux27 products in forms of cold rolled strip and round bar. Vacoflux27 is a better choice when the

HiperCo27 High Saturation Induction Soft Magnetic Alloy Round Bar HiperCo27(UNS K92650) is named 1J27 in China. It is a new type of soft magnetic alloy in China even it is already widely introduced by the inventor Carpenter. A-one Alloy is among the several manufacturers who are able to produce HiperCo27 products in forms of cold rolled strip and round bar. HiperCo27 is a better choice when the fabrication is considered when HiperCo50 is somehow has better permeability and

Soft Magnetic Alloys 1J22 Bright Finish High Magnetostriction Cold Drawn Wire 1J22 is an equal grade of HiperCo50(UNS R30005) FeCoV high magnetic saturation alloy in China. A-ONE ALLOY supplys 1J22 in forms of hot rolled strip/plate, cold rolled strip, hot rolled round bar, hot forged bar, cold drawn wire and parts machined and heat treated per customer requirements. Diameter of cold drawn wire Range: 0.1~5.0mm Spec: GB/T 15002-1994 High staturation maghitice induction soft

1J22 High Magnetic Saturation Alloy Cold Rolled Strip Minimum Thickness 0.05mm 1J22 is an equal grade of HiperCo50(UNS R30005) FeCoV high magnetic saturation alloy in China. A-ONE ALLOY supplys 1J22 in forms of hot rolled strip/plate, cold rolled strip, hot rolled round bar, hot forged bar, cold drawn wire and parts machined and heat treated per customer requirements. Thickness range: 0.05mm-2.0mm Stock size: 0.1mm, 0.2mm, 0.35mm Width: up to 240mm Spec: GB/T 15002-1994 High

Permendur Soft Magnetic Alloy Round Bar with High Saturation ASTM A801 Permendur is an equal grade of HiperCo50-ASTM A801 Type 1 UNS R30005. XUNSHI supplies Permendur round bar with diameter range from 10mm to 500mm. And, for customized sizes, please contact our sales department for confirmation. In fact, we are working with one customer to produce Permendur bar of diameter 2mm. XUNSHI has rich experience of supply Permendur parts, machined and heat treated. What's more, we

Permendur Iron-Cobalt Soft Magnetic Alloy with High Saturation Permendur is an equal grade of HiperCo50-ASTM A801 Type 1 UNS R30005. A-ONE ALLOY supplies Permendur cold rolled strip with minimum thickness of 0.05mm. We are among the several TOP suppliers in China who are able to make this thickness. Our customers are from worldwide including EU&US. A-ONE ALLOY has rich experience of supply Permendur parts, machined and heat treated. What's more, we are able to help our

Mu-metal is a nickel–iron soft ferromagnetic alloy with very high permeability, which is used for shielding sensitive electronic equipment against static or low-frequency magnetic fields. The name of Mu-metal came from the Greek letter mu (μ) which represents permeability in physics and engineering formulas. A number of different proprietary formulations of the alloy are sold under different trade names. And it is no surprise that XUNSHI could provide several of these alloys

SUPRA 50 is an iron-nickel soft magnetic alloys with maximum saturation induction and high permeability. Main applications are relays, gas safety, sensors, watches, shieldings. The saturation flux density of about 16000 gauss (1.6 Tesla) combined with high magnetic permeability and low core loss makes this a versatile alloy with many potential applications. SUPRA 50 has been used in laminated cores for instrument transformers, magnetic shields and cores for certain electronic

VACOFLUX 48 FeCo soft magnetic alloy with low coercive field strength, high permeabilities and low magnetization losses VACOFLUX 48 exhibits the lowest coercive field strength and the highest permeability due to the high level of alloy purity. Particularly with the normal form of supply in thin strip thicknesses, VACOFLUX 48 is considered to be the fully optimised solution for low-loss lamination stacks made from cobalt-iron. Property Low coercive field strength, High

9 CR soft magnetic alloy is a cost-optimized cobalt-iron-chromium alloy with a higher saturation magnetic induction and significantly improved corrosion resistance compared to other cobalt-iron alloys. Due to the high resistivity and high magnetic saturation, 9 CR alloy has better switching times and higher actuation than conventional chrome steels. With these unique properties, 9 CR alloy is suitable for components and actuators with special requirements for corrosion

K94840 is a 48% nickel-iron alloy that possesses the highest saturation flux density of any nickel-iron alloy. The saturation flux density of about 16000 gauss (1.6 Tesla) combined with high magnetic permeability and low core loss makes this a versatile alloy with many potential applications. K94840 has been used in laminated cores for instrument transformers, magnetic shields and cores for certain electronic and communications devices in which extremely high permeability at

Xunshi could now offer FeCO17 Vacoflux 17 Soft magneitc alloy with high performance. VACOFLUX 17 exhibits a very high saturation of 2.22 T and is used in the area of high pressure diesel injection. The alloy can be cold formed. Xunshi VACOFLUX 27 magnetic properties B400A/m (T) B800A/m (T) B1600A/m (T) B2400A/m (T) B4000A/m (T) B8000A/m (T) B16000A/m (T) Hc(A/m) 1.40 1.60 1.72 1.79 1.88 2.02 2.21 152 Typical composition Element % (mass) Cobalt 16.5 – 17.5 Chromium 1.80 – 2.40

Hiperco0 50A alloy is an iron-cobalt-vanadium soft magnetic alloy possessing high magnetic saturation (24 kilogauss, 2.4T), high D.C maximum permeability, low D.C. coercive force, and low A.C. core loss. This alloy exhibits magnetic properties superior to those of other commercial iron-cobalt soft magnetic alloys. In addlition. XUNSHI produces Hiperco 50 alloy which has nearly the same nominal analysis as Hiperco 50A alloy but contains small additions of niobium and carbon

XUNSHI could supply Hiperco 50 HS cold rolled strip. Thickness range 0.05mm~1.20mm and width 20-300mm. Hiperco 50 HS alloy is an iron-cobalt-vanadium soft magnetic alloy which exhibits high magnetic saturation and a unique combination of high yield strength and moderate core loss. The alloy contains a niobium addition for grain refinement during mill processing and final heat treating to produce higher yield strength than conventional Hiperco 50(UNS R30005 alloy). XUNSHI is

Hiperco 50(UNS R30005) is a Fe-Co-V soft magnetic alloy that exhibits the highest magnetic saturation (24 kilogauss) of commercially available soft magnetic alloys while maintaining low core loss as compared to electrical steel.This alloy is produced in strip, plate, wire and round bar form. Xunshi could produce Hiperco 50 cold strip with a minimum thickness of 0.05mm.Hiperco 50 is used in motors and generators for achieving maximum torque density and minimum losses. It helps

Mu-metal Hymu80 is well known for its high performance in Magnetic Shield. It is widely used for shielding to protect electrical components from stray magnetic fields. HYMU 80 alloy is an unoriented, NiFeMo alloy with 80% Nickel content. It could be heat treated to show very high initial permeabilities, maximum permeabilities, minimum hysteresis loss and AC core losses at low magnetic flux densities. Chemical composition(ASTM A753 Alloy 4) C: 0.05 max Mn: 0.80 max Si: 0.50