Rigid Stranding Machine

Rigid Strander Wire Cable Making Machine 12+18+24 For 630mm Reel 1. Application This machine mainly used for aluminum,copper and ACSR shaped or round conductor stranding,compacting,drawing and single-core preforming processing. 2. Main components 2.1 Pay-off 2.2 Stranding cages 2.3 Compacting and Assembly die holder 2.4 Pre-twist & compacting device 2.5 Meter counter 2.6 Capstan 2.7 Traversing stand 2.8 Column type take-up 2.9 Main cabinet and operation cabinet 3. Technical

Rigid Strander Wire Cable Making Machine 12+18+24 For 630mm Reel 1. Application As a result of technical innovation and optimized design, rotating speed of the stranding case Applicable to stranding copper conductor, aluminum conductor, and aluminum conductor steel reinforced (ACSR) without backtwist, as well as insulated wire and strand. Fitted with a compactor, it is also applicable to stranding round-shaped, semi-round-shaped, and sector-shaped copper conductor or aluminum

JLK-6+12+18+24/500 Rigid Stranding Machine 1. Application It is mainly used for stranding and pressing of sector conductors, stranding, drawing and pressing of round conductors, and stranding and manufacturing of large square steel cored aluminum strand. 2. Main components 2.1Ø 500-630 central pay off stand 1 set 2.26B,12B ,18B,24B Rigid strander 1set each 2.3Wire assembly compressing 4sets 2.4Meter counter 1set 2.5Ø2000 double initiative capstan 1 set 2.6Ø2500 take-up stand

Rigid Type Armoring Automatic Wire Twisting Machine High Speed 1. Application This machine is widely used in a variety of multi-core contral cable into a cable and armored. The cross-section of the wire core 1.5~6mm². Advanced practicality and performance of the machine, beautiful appearance, easy operation, maintenance and repair, is the choice for small and medium-sized cable factory equipment. 2. Characteristics 2.1 Bobbin size : 400mm , 500mm , 630mm , 710mm , 800mm 2.2

ACSR/AAC/ABC high section Cable Stranding machine Rigid frame type cable twisting machine 1. Application As a result of technical innovation and optimized design, rotating speed of the stranding case Applicable to stranding copper conductor, aluminum conductor, and aluminum conductor steel reinforced (ACSR) without backtwist, as well as insulated wire and strand. 2. Features 2.1 Central shaft does not bear the reels . 2.2 High rigid, high speed and low inertia high speed and

Good quality Rigid Frame Stranding Machine For Aluminum and copper wire 1. Application This machine mainly used for aluminum,copper and ACSR shaped or round conductor stranding,compacting, drawing and single-core preforming processing. 2. Component Central pay off, stranding cage, assemble holder,compact holder, pulling device, take-up and traverse device, electrical control system, and transmission system. 3. Technical Parameters Model (Rigid Stranding Machine) JLK-500 JLK

JLK630/6+12 Copper Conductor Wire - Color Optional for Rigid Strander 1. Application Mainly used for stranding and compaction of copper and aluminum sector conductors, stranding, drawing and compaction of round and special- shaped conductors, as well as stranding production of steel-cored aluminum strands. 2.Main technical parameters Model (Rigid Stranding Machine) JLK-630/6 JLK-630/6＋12 JLK-630/6＋12＋18＋24 Diameter of single wire Copper φ1.5-5 mm φ1.5-5 mm　 φ1.5-5 mm　

440V Cable Making Rigid Stranding Machine With Side Bottom Loading 1. Application It is used for the wring and compacting of fan-shaped conductor, wringing and drawing of circular conductor, and pre-wringing and wringing of conductor core. Mainly used for copper and aluminum conductor cables twisted wire system fan pressed,pressed and drawn round conductor segment conductor strands twisted pre-pressed. 2. Features 2.1 All Cages, Pre-Spiraling Heads, Taping Head, Capstan &

Floor Loading Rigid Stranding Machine 500 Bobbin Cable Manufacturing Machine 1. Application This machine is widely used in a variety of multi-core contral cable into a cable and armored. The cross-section of the wire core 1.5~6mm². Advanced practicality and performance of the machine, beautiful appearance, easy operation, maintenance and repair, is the choice for small and medium-sized cable factory equipment. 2. Characteristics 2.1 All Cages, Pre-Spiraling Heads, Taping Head

Wire and Cable Floor Loading Rigid type Stranding Machine With 710mm Bobbin 1. Application The rigid stranding machine is used for stranding Copper wire, Aluminum wire and Aluminium alloy wires and conductors with long length and large cross section. 2. Features 2.1 All Cages, Pre-spiraling Heads, Taping Head, Capstan & Takeup are separately driven. 2.2 Stranding compressed, compacted round or sector shaped ( straight or pre-spiraling ) as per customer requirements. 2.3 All

630 Rigid Frame Type Strander with Heavy Duty Frame: High Efficiency and Power Saving 1.Application It is mainly used for the stranding and compaction of copper and aluminum sector conductors, the stranding, drawing and compaction of round and special-shaped conductors, as well as the stranding of steel-cored aluminum conductors. 2. Main component 2.1 Φ1600 Pay-off stand 1set 2.2 12B,18B,24B strander 1set each 2.3 Wire assembly device 3sets 2.4 Meter counter 1set 2.5 Ø2000

Automatic rigid wire stranding machine frame copper conductor wire cable making machine 1. Application High speed rigid stranding machine is mainly used for non-back-twist stranding and compacting of round copper conductor and sector aluminum conductor; and also can be used for non-back-twist stranding of large section, long length copper-cored aluminum wires and aluminum alloy. conductors.The machine is equipped with man-machine interface, and all operating parameters can be

ISO 630 PLC Frame Rigid Stranding Machine For Copper Wire 1. Application It is used for the wring and compacting of fan-shaped conductor, wringing and drawing of circular conductor, and pre-wringing and wringing of conductor core. Mainly used for copper and aluminum conductor cables twisted wire system fan pressed,pressed and drawn round conductor segment conductor strands twisted pre-pressed. 2. Features 2.1 All Cages, Pre-Spiraling Heads, Taping Head, Capstan & Take up are

AAC ACSR 240Sqmm Silent Rigid Stranding Machine With 630mm Bobbin 1. Application The machine is suitable for stranding long length and section bare aluminum copper , aluminum alloy, aluminum cable steel reinforcing wires to product the following power cables, Sector shapped conductors,round compacted . 2. Main component 2.1 Pay-off 1set 2.2 Rigid strander each reel 1set 2.3 Compacting and Assembly die holder 1set 2.4 Concentric taping machine 1set 2.5 Meter counter 1set 2.6

630 Rigid Type Stranding Machine For Aluminum & Copper Wire 1. Application This machine is mainly used for the non-torsion stranding of large-cross-section and long-length steel-cored aluminum strands (ACSR) and aluminum alloy conductors. It can also be applied to the non-torsion stranding and compacting of copper conductors with round, special-shaped, and sector-shaped cores. 2. Main component 2.1 Φ630 Pay-off stand 1set 2.2 #type wire guiding stand 1set 2.3 6B,12B,18B

Full-Automatic Intelligent Coiler JLK-630/1+6+12+18+24 with Separate Motor Drive 1. Application This machine is mainly used for the production of large-section and large-length steel-core aluminum stranded wire and copper, aluminum and aluminum alloy conductors without back-twist stranding; it can also be used for the non-back-twist twisting and compacting of round, special- shaped and sector-shaped conductor cores. 2.Main technical parameters Model (Rigid Stranding Machine)

Rigid Frame Type Strander Frame High Efficiency Power Saving​ 1. Application This machine is mainly used for producing long bare aluminum wire, copper wire, ACSR compression wire, and can also be used for producing fan-shaped compressed stranded wire and circular compressed drawn wire. 2. Features 2.1. This machine is driven by a 36 speed variable transmission gearbox, with dual active and dual hauling capstan, providing strong traction. The wire distributing collar adopt

High Speed JLK Rigid Stranding Machine for ACSR and Steel-Core Aluminum Conductors 1. Application Rigid stranding machine is designed for stranding copper and aluminum conductors. It performs unilay and reverse concentric stranding for round, compressed, compacted, or sector-shaped conductors used in cable manufacturing and overhead lines. Rigid stranding lines are the ideal solution for producing large-size conductors for LV/MV/HV power cables and overhead lines (AAC, AAAC,

500 630 710mm Rigid Type Aluminum and Copper Stranding Machine With auto loading/Cable making machine Low Noise Fast Delivery 1. Application The machine is mainly used for stranding and pressing of sector conductor, stranding and drawing and pressing of round conductor. 2. Features 2.1.No abrasion damage when stranding. 2.2.Most advanced emergency stop device. 2.3.Suitable for power cables and high compacted cross linking cables. 2.4. PLC control system, operating on touch

ACSR Rigid Frame Cable Making Machine For Stranding Wire 1. Application This machine is adopted to produce compact conductor of long bare aluminum wire, copper wires and ACSR,it is also used to produce sector compressed stranding conductor and round compressed drawing conductor. 2. Features 2.1. Multi-form tension: hysteresis tension, mechanical tension, mechanical belt. 2.2. Hydraulic, electric side lower upper plate, side upper plate and so on a variety of overall plate