Tubular Stranding Machine

630mm Bobbin Copper Wire and Cable Tubular Type Stranding Machine​ 1. Application It is used for stranding the steel wires , aluminum wires and copper wires , as well as stranding of control cables. 2. Technical parameters Model (Tubular Stranding Machine) JGG-400 JGG-500 JGG-630 Diameter of single wire Copper φ1.2-2.6 mm φ1.4-4 mm φ2-7 mm Aluminum φ1.8-2.6 mm φ1.8-4 mm φ2-7 mm Maximum stranded conductor OD φ7 mm φ10 mm φ12 mm Stranding Pitch 6 Bobbin Stranding Cage 37-281 mm

7 Wires Tubular Type Stranding Machine With Function Of Back Twisting 1. Application The Tubular Stranding Machine is used for stranding copper wire, aluminum wire, galvanized soft wire, and laying the insulated cable core. 2. Feature 1 The tubular body is in a whole with little radial run out. It's supported on the bearing on both ends, and runs at a very low noise. 2 Bobbin is clamped by disc springs and released by pneumatic device. 3 Wire-break and emergent stops provided

Steel Wire Rope Tubular Stranding /Cable Making Machine With Pneumatic Brake 1. Application The tubular stranding machine is used for copper wire, aluminum wire and insulated cable core,with back twist, for 1+6 Bobbin, 1+12 Bobbin copper / aluminium round & compact conductors and steel wire stranding. The production speed is extremely fast. For example, JGG/1+6 Tubular Stranding Machine, 45mm² bare wires, pitch 105mm, the speed is 2500m/h. So, in 12 hours, the skip stranding

Easy Installation Electric Tubular Stranding Machine 1. Application The machine is used for stranding the copper conductor, aluminium conductor, steel rope and control cable etc,which has reached modern advanced level in the world. 2. Main Components The tubular type wire cable making machine is mianly composited of Central pay-off, tubular host, taping machine (optional),traction device,take-up and traversing stand, and electrical control system. 3. Advantages 3.1. Cage is

7 Wires Tubular Type Stranding Machine With Back Twist 630 500 400 Bobbin 1. Application The machine is used for compact-strand bare aluminum wire, bare copper wire and ACSR to produce power cables. 2. Feature 2.1. Central shaft does not bear the reels . 2.2. High speed and low inertia high speed and low inertia. 2.3. No abrasion damage when stranding. 2.4. Most advanced emergency stop device. 2.5. Suitable for power cables and high compacted cross linking cables. 2.6. PLC

Tubular type Stranding Wire and Cable Making Machine With 500mm Bobbin 1. Application The tubular stranding machine is used for stranding copper wire, aluminum wire and insulated cable core.The production speed is extremely fast. For example, JGG/1+6 Tubular Stranding Machine, 45mm² bare wires, pitch 105mm, the speed is 2500m/h. So, in 12 hours, the skip stranding machine can produce 30000m wires. If we reduce the loading and unloading time, and host stop- time, for example 3

630mm Copper Conductor Tubular Stranding Machine With Annealed Cage 1. Application The machine is used for stranding the copper conductor, aluminium conductor, steel rope and control cable etc. 2. Features 2.1 Bobbin is clamped by disc springs and released by pneumatic device. 2.2 Wire-break and emergent stops provided for all the line. 2.3 The machine adopts PLC control the whole line. The electrical control system is advance in technology, easy in operation, reliable in

Steel Electric Tubular Stranding Machine For Wire Cable Making 1. Application This stranding machine mainly used for a.Sector Conductor Stranding and Compacting b.Round Conductor Stranding and Closing c.Pre-spiral Sector/Milliken Segment Compacting 2. Components 2.1 630 pay off shelf 1 set 2.2 6B cage strander 1 set 2.3 Wheel type tractor 1 set 2.4 Safety cover 1 set 2.5 Electrical control cabinet 1 set 2.6 1600 End shaft traverse take up 1 set 2.7 Wrapping device(optional) 1

Cable Making Equipment Copper Wire Tubular Stranding Machine With Back Twisting 1. Application The Tubular stranding machine is used for high carbon & low carbon steel wire rope, copper & aluminium conductor.Tubular strander stranding with back twist, for 1+6 Bobbin, 1+12 Bobbin copper / aluminium round & compact conductors and steel wire stranding.We also customise this tubular type stranding machine in accordance with customers' requirements. 2. Feature 2.1 Tubular

Tubular Stranding With Electrical Control System 1. Application The machine is mainly used to make stranded steel , copper and ACSR, or control cable within 7 cores. 2. Feature 2.1 The tubular cage is annealed, which will reduce the internal stress and increase service life. 2.2 Bobbins locked with mechanical pintles: one is movable and one is fixed, or Bobbin is fasten on the axis by latch. 2.3 No abrasion damage when stranding. 2.4 Most advanced emergency stop device. 2.5

500 mm Bobbins Steel Wire Rope Tubular Stranding Machine High Speed 1. Application It is used for stranding the steel wires , aluminum wires and copper wires ,as well as stranding of control cables. 2. Features 2.1. Stable 2.2. Using mature supporting wheel support structure, with good equipment stability. 2.3. Environmental protection, no pollution emission. 2.4. Fully enclosed noise reduction housing is optional. 3. Technical parameters Model (Tubular Stranding Machine) JGG

Durable Bearing Type Tubular Stranding Machine for Wire Making Industry 1. Application This high speed electric wire cable making machine is used for stranding copper wire, aluminum wire, steel wire, aluminum stranded steel core wire, and steel wire rope. Three sets of large bearings are used to support the rotating tube of tubular strander JGG630 series so as to achieve higher rotating speed, smooth performance, and a longer service life of the bearings. 2. Component 2.1

OD 7mm Electrical Wire Tubular Stranding Machine Pneumatical Clamping 1. Application It is used for stranding the steel wires , aluminum wires and copper wires , as well as stranding of control cables. 2. Features 2.1 The machine reel is pneumatically clamping or manually clamping, which is easy to operate, safe and reliable. 2.2 The machine is equipped with safety links such as broken automatic parking device and emergency parking device,which is safe and reliable. 2.3 The

630 Tube Twisting Machine Tubular Stranding Machine For Cable Industry 1. Applications This machine is used for copper stranded conductor,aluminium stranded conductor,steel strand,aluminum conductor steel reinforced and steel wire rope twisting/stranding.With the center taping machine,it also can be insulation core wire into a cable and segment of control cables stranded. 2. Main Features 2.1 Cage is installed on the casted plate. Stable operation and easy installation. 2.2

630 Type Industrial Tubular Stranding Machine For Steel Wire Making 1. Application The tubular stranding machine mainly used for stranding copper wire, aluminum wire, steel wire, ACSR and wire rope. Accompanied with taping head, it can used for insulation cores and some control cable stranding process. 2. Feature 2.1 The tubular body is in a whole with little radial run out. It's supported on the bearing on both ends, and runs at a very low noise. 2.2 Bobbin is clamped by

Reliable Tubular Type Cable Stranding Machine / Copper Wire Twisting Machine 1. Application The Tubular Stranding Machine is used for stranding copper wire, aluminum wire, galvanized soft wire, and laying the insulated cable core. 2. Feature 2.1 The tubular body is in a whole with little radial run out. It's supported on the bearing on both ends, and runs at a very low noise. 2.2 Bobbin is clamped by disc springs and released by pneumatic device. 2.3 It can estimate the

Copper Wire Tubular Type Stranding Machine 500/1+6 With High Rotating Speed 1. Applications The machine is used for stranding the copper conductor, aluminium conductor, steel rope and control cable etc.which has reached modern advanced level in the world. 2. Main Features 2.1 Bobbin is compacted by disc springs and released by pneumatic device. 2.2 Wire-break and emergent stops provided for all the line. 2.3 The machine adopts PLC control the whole line,the electrical control

Aluminium Conductor Tubular Stranding Machine Dia 12mm 1. Application This machine is mainly used for wire and cable factory to strand copper, aluminum, steel wire stranding work to produce electrical cable, ACSR cable,etc. 2. Main Features The tubular type wire cable making machine is mianly composited of Central pay-off, tubular host, taping machine (optional), traction device, take-up and traversing stand, and electrical control system. 3. Components 3.1 Pay off 3.2 6B

JGG-400 Tubular Stranding Machine For Aluminium Wire Making 1. Application The machine are mainly used for copper wire ,aluminium wire ,steel wire rope,steel-cored aluminium wire stranding and insulated wires of multi-cores as well . It is installed with stationary pay off stand stranding body ,die holder,double-haul off device,take up stand,transmission system and electrical control system,It can be equipped with a tapping device according to client request. 2. Equipment

Steel Electric Wire Tubular Strander 500 630 Bobbins 22KW 1. Application The machine is used for stranding copper aluminum stranded wire, steel cored aluminum stranded wire and steel stranded wire.Wire break alarm signal is transmitted by pulse, which is accurate and efficient.And cabinet type touch screen operation desk is adopted, which is convenient for operation and beautiful in form. 2. Product Series 2.1 Based on different bobbin size in stranding cage: PN200, PN315,