Cable Machine Accessories

Eccentric Tangential Type Non Metallic Taping Machine For Wrapping Cable 1. Application This machine is used for mica tape single/double/triple layer wrapping.Which equipped with wire break protection device set on the pay-off and take up tension wheel, it can stop machine automatically when wire broken occurs. 2. Main technical datas Max. OD of taping wire 100 mm ID of hollow shaft 120 mm Taping pad size (O.D.× I.D.×W.) 600 x 80mm x (15~80mm) Taping width 15~80 mm Thickness

Wire Cable Puller Cable Machine Accessories 1. Usage Areas: • Extruder Lines • Steel Rope Stranding Lines • Skip Strander • Planetary Strande 2. Main technical datas Type capstan type Diameter of capstan wheel Φ 2300mm Linear speed 8～70m/min Max. pulling force 15000kg The gear steps 36 gears Double wheels, double initiative, circular groove, front and rear wheels are inclined to each other to ensure that the cable is not squeezed when traveling. 3. Company introduction Hejian

Belt Type Cable Capstan / Pulling Machine Stranding Cabling Extruder 1. Application Haul-off machine is mainly used for help to pull cable after stranding, extruder or cabling,t he whole series has more than ten specs of 200kg-15000kg, and there are two kinds of speed regulation structures of Z4 DC motor or variable-frequency motor for users to choose. With electronic meter, it can display the line speed and meter length in time. 2. Main technical data Max pulling force

Eccentric Tangential Type Non Metallic Taping Machine High Speed Stepless 1. Application Eccentric type wire and cable non-metallic taping machine is mainly used for wrapping Non-woven fabric, glass cloth, semiconductor fabric on the cable core to be cable armoring layer,t he machine gives stable tension control, accurate taping pitch and good wrapping performance. 2. Features 2.1 The sensor of wire broken detection placed on pay-off and take up tension unit. In case of wire

Dual Bobbin Armoring Cable Machine Accessories For Semiconductor Tape Wrapping 1. Application The high speed taping line is mainly used for taping power cable, control cable and shielded cable. 2. Main technical datas Max. OD of taping wire 100 mm ID of hollow shaft 120 mm Taping pad size (O.D.× I.D.×W.) 600 x 80mm x (15~80mm) Taping width 15~80 mm Thickness of tape 0.1~0.5 mm Driving motor 15 KW(AC motor with inverter) Max. rotating speed of taping head 800 r/min(Taping

Wire Pulling Cable Machine Accessories 2300 Strong Double Capstan​ 1. Usage Areas: • Extruder Lines • Steel Rope Stranding Lines • Skip Strander • Planetary Strande 2. Main technical datas Type capstan type Diameter of capstan whee Φ 2300mm Linear speed 8～70m/min Max. pulling force 15000kg The gear steps 36 gears Double wheels, double initiative, circular groove, front and rear wheels are inclined to each other to ensure that the cable is not squeezed when traveling. 3.

High Progress Automatic Aluminium Alloy Cable Pulling Machine 1. Application Haul-off machine is mainly used for help to pull cable after stranding, extruder or cabling.It is equipped with a ground shaft transmission structure for users to use in cable, armor, copper tape shielding and winding production lines. 2. Main technical datas Max pulling force 1600KG OD of applicable cable 10~100 mm Linear speed 40m/min Touching length of flat-belt 2300mm Width of belt 120mm The QTY

1. Application Mainly for the paying off and taking up of wire various kinds of wire and cable production lines. 2. Machine Features Floor-mounted pay-off stand, suitable for plastic extruders, wire & cable stranding and cabling machines. Reel traversing design saves floor space and ensures stable cable production. Automatic tension control, cable diameter/traverse pitch adjustment, position correction and reel loading/unloading. Reliable mechanical structure and electrical

Dual Wheel Capstan Cable Pulling Machine for Wire and Cable Stranding Machine 1. Application: • Extruder Lines • Steel Rope Stranding Lines • Skip Strander • Planetary Strander Our dual capstan is designed for high-performance stranding of power cables and other large-size conductors, offering stable operation, high synchronization accuracy, and reliable traction performance. Ø2000/2500mm dual active capstan wheels with a dual-drive and dual-capstan configuration, ensuring

1600KG Automatic Communication Cable Pulling Machine Haul-Off Machine 1. Application Haul-off machine is mainly used for help to pull cable after stranding, extruder or cabling.The equipment adopts the motor-transmission gearbox, a reduction gearbox, and a hard drive structure of the upper and lower helical gears, a crawler wheel, stable transmission, large carrying capacity and convenient maintenance. 2. Main technical data Max pulling force 1600KG OD of applicable cable 10

1. Applications Our Pay-Off and Take-Up Systems are designed for efficient and reliable wire and cable handling in medium- to heavy-duty production applications. Available in portal, A-frame, and column-type designs, they provide stable reel support, precise cable alignment, and smooth pay-off and take-up operations. The systems can accommodate different reel sizes and offer manual or semi-automatic reel changing options. With advanced drive systems and accurate traverse

Column type Take Up / Pay Off Cable Machine 1. Technical parameters 1.1Applicable reel specifications: PN1000---PN1600 1.2Applicable reel weight: ≤5T 1.3Type: No foundation(The roller moves on the ground to open and close) 1.4Max linear velocity: 110m/min 1.5Take-up diameter: ∮40mm 1.6Lifting mode: The lifting of the reel and the parting and closing of the thimble are driven by the AC motor and operated by the cantilever. 1.7Clamping pintle mode: Side shift, both sides of the

40m/Min Electronic Control Cable Haul-off Machine For Wire Pulling 1. Application This machine is mainly used for pulling various cable , the whole frame is made of high-quality steel plate after bending and splicing, and the appearance is novel,with electronic meter, it can display the line speed and meter length in time.It is equipped with a ground shaft transmission structure for users to use in cable, armor, copper tape shielding and winding production lines. 2. Main

High Speed Eccentric Type Metallic Taping Machine For MV HV Power Cable 1. Application The high speed taping line is mainly used for taping power cable, control cable and shielded cable. 2. Main technical datas Max. OD of taping wire 100 mm ID of hollow shaft 120 mm Taping pad size (O.D.× I.D.×W.) 600 x 80mm x (15~80mm) Taping width 15~80 mm Thickness of tape 0.1~0.5 mm Driving motor 15 KW(AC motor with inverter) Max. rotating speed of taping head 800 r/min(Taping width:80mm)

Haul Off Type Cable Pulling Machine Flat Belt 40m/Min 1. Application This machine is mainly used for various cable production lines for single machine or front and rear double traction.The tension tractor adopts magnetic powder tension control, which is used for the traction of the insulation and sheath extrusion production line.The tension is instantaneously adjustable, preventing the abrasion of the cable in the sink after the extrusion, and effectively solving the

15KW Automatic Stepless Cable Machine For High Speed Taping Line 1. Application The high speed taping line is mainly used for taping/wrapping power cable, control cable and shielded cable,With the function of wire-breaking and wire-finishing.The machine is adjusted by PLC to adjust the working condition of each electric.The start-up and running speed of AC motor is controlled by inverter. Electric system is with an advanced technical, easy to operate, reliable to operate. 2.

Original Factory Multi-layer Concentric Horizontal Tape Wrapping/Taping Machine for cables 1. Application High speed Multi-layer concentric horizontal tape wrapping machine is used for High Frequency Signal Wire, Data Transmission Wire, Power Cables, Control Cables Special wire; Nylon, Copper Foil, Mica Tape, Aluminum Foil, Swillable Tape, PPT double layer wrapping. 2. Main technical datas Max. OD of taping wire 100 mm ID of hollow shaft 120 mm Taping pad size (O.D.× I.D.×W.)

Wire and cable concente tping head machine 1. Application Eccentric type wire and cable non-metallic taping machine is mainly used for wrapping Non-woven fabric, glass cloth, semiconductor fabric on the cable core to be cable armoring layer,t he machine gives stable tension control, accurate taping pitch and good wrapping performance. 2. Features 2.1.The main shaft is made of a seamless steel tube, supported by double-row roller on both ends. 2.2.The back-twisting is

Non Metallic Cable Taping Machine Eccentric Tangential Type For Wrapping 1. Application Eccentric type wire and cable non-metallic taping machine is mainly used for wrapping Non-woven fabric, glass cloth, semiconductor fabric on the cable core to be cable armoring layer. 2. Main technical datas Max. OD of taping wire 100 mm ID of hollow shaft 120 mm Taping pad size (O.D.× I.D.×W.) 600 x 80mm x (15~80mm) Taping width 15~80 mm Thickness of tape 0.1~0.5 mm Driving motor 15 KW(AC

Custom Stepless Cable Taping Machine 15 - 80mm Width​ 1. Application The machine is used for cable tapping , the package belt (mica tape, tissue tape, aluminum foil, polyester film, etc. ) through the turntable rotation, around wrapped in the core line, with a single around the header. Is mainly used for wires, power cables, control cables, fiber optic cable and other insulation core wound package. 2. Main technical datas Max. OD of taping wire 100 mm ID of hollow shaft 120