Single Twist Bunching Machine

Cantilever Single Twist Wire Bunching Machine For Control Cable Twisting Wrapping 1. Application This series machine is suitable for control cable,communication cable,data cable,coaxial cable core wire and PE/PVC coated and center wrapping. 2. Performance 2.1 HMI + PLC control system, twisting pitch, production, line speed set on touch screen, alarm and recipe system, easy operation. 2.2 Pitch accurate, changed mechanically, so pitch can be constant when speed accelerating or

Cantilever Single Twist Bunching Machine Core Wire Bunched Cable Twister 1. Application It is suitable for single twisted cable assembly of copper wire and core wire. 2. Features 2.1. High production speed, constant tension from empty to full bobbin, especially for high quality stranding wire. 2.2 Use shaft to calculate meters, less than 0.01% error for a certain wire&cable. 2.3. With 100 active back-twist pay-off machine to achieve bunching instead of twisting. 2.4.

High Speed Cantilever Type Single Twist Buncher 1000r/Min 1. Application Single Twist Cantilever Buncher is mainly twisting multi-strand soft structure steel wire, core wire of power wire, control cable, core wire of computer wire, rubber cable and many other various insulation wires with soft structures. 2. Performance The production speeds to be achieved are in comparison to a drum twister much higher. The single twist buncher is limiting the bending radius of the ingoing

Cantilever type high speed twisting machine 1. Application It is mainly used in cable laying of computer wires,such as data cable and control cable.It may synchronize central coil tapping and side coil tapping.The entire machine is consists of pay off rack,central bundler,side pay off rack for the central coil tapping set,single twist(cable-laying)machine and electrical control cabinet. 2. Performance 2.1. High rotate speed, main shaft is lubricated by thin oil, cool warning

1000mm Cantilever Single Twist Bunching Machine For Control Cable 1. Application The Cantilever Single Twist Wire Bunching Machine is suitable for control cable,communication cable,data cable,coaxial cable core wire and PE/PVC coated and center wrapping. 2. Simple descriptions 2.1 Wire type: control cable, communication cable, data cable, coaxial cable 2.2 Finish cable dia: 25mm 2.3 Take-up bobbin: 1000mm 2.4 Twist type: Single Twist Machine 3. Technical parameters Model 400

Bunched Wires Cable Twisting Machine 1000R/Min Pneumatic Control​ 1. Application The cantilever machine suit for various power wire, CAT5,ultraCAT5 and CAT6 data cable,commumication cable and other twist.With more stability, high production efficiency, low noise and easy to operation. 2. Performance This machine is consist of PLC procedure, frequency conversion speed-regulation control, pneumatic control, cantilever cabling twist motion, bobbin capstan take-up motion and

Cantilever Single Twist Bunching Machine Core Wire Bunched​ 1. Application The cantilever machine suit for Cat5,cat6,cat7,cat8 network cables, data cables. Communication cables. Coaxial cables, etc. in multiple collections and continuous wrapping. 2. Performance 2.1. High rotate speed, main shaft is lubricated by thin oil, cool warning if oil not enough ,which can lower the temperature and the noise,extend the life of the machine. 2.2. The wire goes from belt to idler pulley

Cantilever Type Single Twist Bunching Machine Auto Tension 1000RPM 1. Application It is suitable for all kinds of power lines, CAT 5 and CAT 6 and CAT 7 data cables, communication cables and other special high speed forming stranding, while completing central wrapping and side wrapping. 2. Performance The series of equipment consist of PLC procedure, frequency conversion speed-regulation control, pneumatic control, cantilever cabling twist motion, bobbin capstan take-up

Cantilever Single Twist Bunching Machine Cable Making Machine With Taping 1. Application This series machine is used for twisting bare copper, tinned wire and enameled wire, etc which mainly applicated in the wire and cable industry. 2. Performance This machine is consist of PLC procedure, inverter speed-regulation control, pneumatic control, cantilever cabling twist motion, bobbin capstan take-up motion and reciprocating traverse motion are dual controlled by mechanical

Automatic Cantilever Single Twist Bunching Machine 1000RPM Cable Wire Strander​ 1. Application It is suitable for various power wire, one time completion of PE or PVC covered core wire twist & center wrapping or side wrapping for cable,communication cable,power cable etc. 2. Performance The series of equipment consist of PLC procedure, frequency conversion speed-regulation control, pneumatic control, cantilever cabling twist motion, bobbin capstan take-up motion and

Network Data Cable Single Twist Bunching Machine High Rotation Speed 1. Application The series of equipment consist of PLC procedure, frequency conversion speed-regulation control, pneumatic control, cantilever cabling twist motion, bobbin capstan take-up motion and reciprocating traverse motion are dual controlled by mechanical linkage and pneumatic linkage,so, the excellent synchronous performance of the unit from starting. Normal opeartion,slow stop and emergency stop

Core Electric Electrical Wire Cantilever Single Twisting Bunching 1. Application Single Twisting Bunching is used for PVC. PE cable, power wire, high frequency digital cable, assemble sets of timing tape.Which use program design, automatic calculation of stranding distance and traverse distance, PLC and touch screen control, realize automatic tracking calculation control after setting stranding distance, traverse distance, tape pitch and tape tension. 2. Performance 2.1. High

Cantilever Single Twist Machine Cable Wire Strander Bunching Machine​ 1. Application It is applicable to the twisting and tapping for core wires of various cables. If it is used in linkage with back twist, it is suitable for 5#, 6# signal and data cables. 2. Performance 2.1. High rotate speed, main shaft is lubricated by thin oil, cool warning if oil not enough ,which can lower the temperature and the noise,extend the life of the machine. 2.2. The wire goes from belt to idler

1000r/Min Single Twisting Stranding Machine With Multiple Cores 1. Application This machine applies to make and twist CAT5, CAT6 communication cable, HDMI cable and computer working cable. It will taping synchronously. Purpose For twisting PE/PVC shielded wire and core center wrapping and side tapping of the wire. 2. Performance 2.1. High rotate speed, main shaft is lubricated by thin oil, cool warning if oil not enough ,which can lower the temperature and the noise,extend

Cantilever Single Multi Cable Twisting Machine For Bare Wire 1. Application It is suitable for the twisting and synchronous winding of insulated core wires such as LAN cable, CAT7 CAT8, etc. This single twisting machine is widely used in various types of wires and cables production process. 2. Consisting Components This machine is composed of Pay-off, single twist machine, center tapping machine, length counter, electric control system. 3. Technical parameters Model 400-500

630 Cantilever Single Twist Bunching Machine For Core Wire 1. Application This machine applies to make and twist CAT5, CAT6 communication cable, HDMI cable and computer working cable. It will tape the cable synchronously.Purpose For twisting PE/PVC shielded wire and core center wrapping and side tapping of the wire. 2. Features 2.1 More stability, high production efficiency, low noise and easy to operation. 2.2 Twisting and wrapping at the same time. 3. Technical parameters

Cantilever Single Twist Bunching Machine For Core Wire 1. Application It is suitable for single twisted cable assembly of copper wire and core wire. 2. Performance 2.1. High rotate speed, main shaft is lubricated by thin oil, cool warning if oil not enough ,which can lower the temperature and the noise,extend the life of the machine. 2.2. The wire goes from belt to idler pulley of main shaft directly,which can reduce scratch and keep round cross section. 2.3. Magnetic power

Cantilever Single Twist Bunching Machine Cable Wire Making Machine 1. Usage Suitable for twine or more than two strands of covered core wire and center wrapping paper (tape) or side laying wrapping paper (tape). 2. Performance 2.1. More stability, high production efficiency, low noise and easy to operation. 2.2. Twisting and wrapping at the same time. 3. Technical parameters Model 400-500 630 800 1000 1250 Pay-off bobbin(mm) 300-400mm 400-500-630 400-500-630 400-500-630 400

415V Automatic Single Twist Bunching Machine For Copper Wire 1. Application This machine is suitable for control cable,communication cable,data cable,coaxial cable core wire and PE/PVC coated and center wrapping. Which is more stability, high production efficiency, low noise and easy to operation, twisting and wrapping at the same time. 2. Performance The series of equipment consist of PLC procedure, frequency conversion speed-regulation control, pneumatic control, cantilever

1000r/min Core Wire Single Twist Bunching Machine Cantilever Type 1. Application One-time Completion of PE,PVC Covered Core Wire Stranding & Concentric Tapping or Side Taping for Control Cable,Communication Cable, Power Cable , Coaxial Cable. Mainly used for high Precision Core Wire Stranding. 2. Performance 2.1. High rotate speed, main shaft is lubricated by thin oil, cool warning if oil not enough ,which can lower the temperature and the noise,extend the life of the machine