Electrical Safety Test Equipment

5V / HB/ V-0/1/2 UL94 Vertical and Horizontal Flame Test Apparatus Lab Testing Equipment 1. Introduction of Flame test Apparatus Horizontal and vertical flame test apparatus is applied to 50W vertical flame test includes V-0, V-1, V-2, horizontal flame tester HB, and 500W vertical flame test includes 5VA, 5VB, HF-1, HF-2 and HBF. It is widely used in the R&D department, QC department and production department of lighting equipment, low-voltage apparatus, household appliance,

IEC60065 Mandrel Test Equipment for Insulation Film Mandrel / Mechanical Strength and Abrasion Test 1. Introduction of Mandrel Test Equipment Mandrel Test Equipment is designed according to IEC61588 figure 6, IEC60950 annex A, IEC60065 and GB1921. It is used for the insulating thin layer of the power transformer and supply unit as well as the similar products to do the spindle test, mechanical strength test and abrasion test. This test device will have a mechanical limit in

Automatic Abrasion Resistance Tester with Radius 0.25mm Scratch Pin 1. Application The abrasion resistance tester is applied for Scratch testing on solid insulating accessible parts or printed boards used in household appliances and similar products to ensure that the material has sufficient strength not to be pierced by sharp tools. 2. Introduction Abrasion resistance tester is designed according to IEC60950 clause 2.10.8.4 and IEC60335-1 clause 21.2. It is applied to do

IEC60335-2-24 Vacuum Cleaner Test Apparatus for Testing the Abrasion Resistance of Current-Carry Hose 1. Standards compliant: IEC60335-2-2 clause 21.102 figure 101 and IEC60335-2-24 2. Application: for testing the abrasion resistance of current-carry hose of vacuum cleaner 3. Introduction Current-carry hose abrasion resistance test apparatus is designed according to IEC60335-2-2 clause 21.102 figure 101 and IEC60335-2-24 clause 21.102 and figure 101, it is applied to test the

IEC60335-2-24 Vacuum Cleaner Test Apparatus for Testing Flexing Resistance of Curreny-Carrying Hose 1. Standards compliant: IEC60335-2-2 clause 21.103 and figure 102 and IEC60335-2-24 clause 21.103 and figure 102 2. Application: for testing the resistance to flexing of current-carry hose of vacuum cleaner 3. Introduction Curreny-carrying hose flexing resistance test apparatus is designed according to IEC60335-2-2 clause 21.103 and figure 102 and IEC60335-2-24 clause 21.103

IEC60335-2-15 30ML Spillage Test Apparatus for Testing the Connectors with Spillage Prtoection 1. Introduction: The spillage test apparatus meets the requirements of IEC60335-2-15 clause 15.2 and figure 101. It’s used to check the connectors with spillage protection to ensure that the connectors are not affected by liquids when installed in a rated voltage base according to the manufacturer’s installation instructions. the spillage test is carried out with the appliance

IEC60335-2-75 figure 101 Splash Test Apparatus for Testing Cookware, oven and Stove 1. Introduction The splash test apparatus meets the requirements of IEC60335-2-75 clause 15.1.1 and figure 101, IEC60335-2-64 clause 15.1.1 and 15.1.2, GB4706.38 and GB4706.52. It’s used for the splash test of the appliance of the professional type classified IPX1, IPX2, IPX3 and IPX4. The whole device is made of aluminum sheet, and can move freely with wheels. The nozzle, bowl and hose are

IEC60811 Figure 1 Indentation Device for Testing Cable Insulation Sheaths 1. Introduction The indentation device is designed according to IEC60811-508:2012 figure 1, the device is consisted by blade, supporting mandrel and loads.It is applied to test the indentation produced by the insulation sheath of the plug or cable under high temperature and pressure, the device should work with oven. 2. Parameter Test station 3 Blade thickness 0.7±0.01mm Blade width 30mm±0.1mm Load 1g*3

IEC60065 Mandrel Test Device for Testing Non-Separable Thin Sheet Material 1. Application For testing three-or more layers of non-separable thin-sheet material forming reinforced insulation. 2. Test method a downward force of 150N±10N is applied to the free end of the sample, using a approriate clamping device. The mandrel is rotated by hank without jerks: - from the initial position to the final position and back - as above for the second time - from the initial position to

IEC60598-2-20 Clause 20.12.4 Lighting Chains Pressure Test Device for Testing Fixity of Lampholder Contacts in Push-in Lampholder 1. Application For testing the fixity of lampholder contacts in push-in lampholder of lighting chains. Lampholder contacts in push-in lampholders shall be reliably secured in the lampholder body by mean other than friction to avoid a displacement of the lampholder contacts such that live parts of the chain become accessible either through the

IEC60335-2-2 Figure 102 Apparatus for testing the resistance to flexing of current-carrying hoses 1. Introduction This apparatus is designed according to IEC60335-2-2 clause 21.103 and figure 102, it is applied to test the current-carry hose of vacuum cleaners resistant to flexing.During the test, the end of the hose is attached to the pivoting arm of the test equipment, the distance between the pivot axis of the arm and the point where the hose enters the rigid part is 300mm

of Flexing Parts 1. Introduction The spark ignition test apparatus meets the requirements of IEC60335-2-17 clause 30.101 and figure 112. It’s used for the flame resistance test of the flexible parts to check if the arcing of conductors will cause the sample to be overheated or burned. The test apparatus is consisted by control box and test rig, user should prepare the heating cabinet. 2.

IEC60335-2-2 Figure 101 Apparatus for testing the abrasion resistance of current-carrying hoses 1. Introduction This test apparatus is designed according to IEC60335-2-2 clause 21.102 figure 101, it is applied to test the current carry hoses of vacuum cleaners resistant to abrasion. One end of the hose is attached to the connecting rod of the crank mechanism, the crank rotates at 30r/min resulting in the end of the hose moving horizontally backwards and forwards over a

IEC60335-2-17 Figure 110 Equipment for Flexing Heating Elements and Internal Wiring 1. Introduction The equipment for flexing heating elements and internal wiring is designed according to IEC60335-2-17 clause 21.111.1 and figure 110, it is mainly used for flexing test of heating elements and internal wiring of electric blanket, and check the degree of damage after a certain number of bending. The equipment has a carrier of two pulleys, each pulleys have a groove with a radius

IEC60068-2-31 Figure A.1 Rotating Barrel / Tumbing Barrel for Repeat Free Fall Test 1. Introduction 1. Introduction The tumbling barrel is designed according to IEC60068-2-31 for repeat free fall test. The barrel has 2 lids made of transparent acrylic, user can not only observe the falling state of the sample, but also can placing and taking out the sample easily. The sample shall be placed in the tumbling barrel and subjected to prescribed number of falls. The operation

Drop Impact Test Hardwood Surface 1. Introduction The hardwood surfaces can meet the requirement of GB4943.1-2011 clause 4.2.6 and UL1993 clause 8.8.2, it is applied to perform the drop impact test to detect the drop resistance performance of the sample. The hardwood surface shall rest on a concrete floor or an equivalent non-resilient floor during the test. 2. Parameter Item GB hardwood surface UL Hardwood surface Size 600*600*52m (customized) 600*600*63mm (customized) First

Automatic Cord Reel Test Equipment for Household Appliance IEC60335-1 1. Test principle: Two-Thirds of the length of the cord is unreeled. If the withdrawable length of the cord is less than 225cm, the cord is unreeled so that a length of 75cm remains on the reel. An additional length of 75cm of the cord is then unreeled and pulled in a direction so that the greatest abrasion occurs to the sheath, taking into account the normal position of use of the appliance. Where the cord

UL746A High Current ARC Ignition Test Apparatus 32.5A / COSφ0.5 PLC Control 1. Introduction: The high current arc ignition test apparatus is designed according to IEC60950-1:2001 clause 4.7.3.6, BS/EN60950-1:2001, BS7002:2001, GB4943-2001 and UL746A, IEC60947.1:1999, GB/T14048.1-2000, IEC730.1:1993, GB14536.1-1998 and etc.. It’s used to measure and assess solid insulating material against to resistance to ignition from arcing electrical sources. A power 240V(AC)/60Hz is to be

IEC60335-1 Automatic Household Cord Reel Testing Machine 1. Introduction The automatic cord reel testing machine is designed according to IEC60335-1 clause 22.16. It is applied to check if the cord reel construction of household and similar electrical appliance will cause: 1) undue abrasion or damage to the sheath of the flexible cord. 2). breakage of conductor strands. 3). Undue ware of contacts. The automatic cord reel testing machine adopts multi-function fixture and large

IEC60335-1 Calibrated Power Cord Tension and Torsion Testing Machine up to 100N Pull Force 1. Introduction of Power Cord Tension and Torsion Testing Machine The power cord tension and torsion testing machine can be provided with calibration certificate authorized by ISO17025. It is made according to the standards of IEC60335-1 clause 25.15, IEC60598, GB7000, GB2486 and etc., It is applied to test the tension and torque on the terminals of appliances provided with a supply