Test Finger Probe

IEC60598-1 1.1m Test Chain Made by 63% Cu and 37% Zn with CNAS Calibration Certificate 1. Introduction of Test Chain: Test chain is designed according to GB7000.1 and IEC60598-1 clause 4.26.3 & figure 29 . It is mainly applied to provided a prevent the impairing of safety due to unintended short-circuiting of uninsulated accessible SELV part of opposite polarity. The test chain is made by copper zinc alloy (Cu: 30%, Zn: 37%), the chain shall have a resistance value of 2.5Ω/m

PG-PA145 Lab Testing Equipment UL Test Rod Probe meet the requirements of UL982 Standard 1. Introduction of UL Test Rod Probe The UL test rod probe is designed according to the standard of UL982 fig. 58.6, UL1278 Fig. 8.2, UL398 fig. 8.2 (PA170B), UL507 (PA170D) and UL749 fig.2. It's used for testing enamel coated wires. 2. Application of UL Test Rod Probe: Transformers and Inductors 3. Parameter of UL test Rod Probe Radius of Rod Φ6.4mm Length of rod 101.6mm Material Nylon

Stainless Steel Interlock Concealment Test Probe as per IEC60335-2-25 Fig 101 1. Introduction of interlock concelament test probe The interlock concelament test probe is designed according to IEC60335-2-25 clause 22.105 and figure 101, it is applied to microwave oven. 2. Parameter of interlock concelament test probe Diameter of test rod Φ3mm Diameter of handle Φ10mm Length of rod 100mm Standard IEC60335-2-25 3. Figure of interlock concelament test probe 4. FAQ: 1. What is the

Metal Finger Nail Probe Lab Testing Equipment Meet IEC60335-1 Figure 7 with 50N Force 1. Standard of Fingernail Probe: IEC60335-1, GB4706.1-2005, & UL etc. 2. Application of fingernail Probe: The fingernail probe is mainly used to test whether the electric shock or contact moving parts of the non-removable parts can withstand the mechanical pressure in normal use to achieve the IP level of the testing equipment. 3. Specification: Nail component Finger tip, middle finger and

High Precision Analog Force Gauge with range of 0 to 50N Equip with Test Finger Probe 1. Introduction The analog force gauge is a high precision and small size mechanical measuring instrument for pull and push force testing. Applicable to push-pull load test of electronic appliances, light industrial textiles, construction hardware, lighters and ignition devices, fire-fighting equipment, pens, locks, fishing gear, power machinery, scientific research institutions, etc. 2.

IEC60335 Test Probe Kit Includes Standard Test Finger Long Pin Test Probe Test Probe 41 ect. The PG-60335 contains the probes listed in the core of the UL / IEC / EN 60335 requirements. The IEC60335 Test Probe includes the following probes: 1. Jointed Finger Probe Diameter of finger: 12mm Length of finger: 80mm Diameter of baffle: 50mm Length of baffle: 100mm Thruster (optional) 10N Material: Insulating material (baffle and handle), stainless steel(finger) 2. Short Test Pin

IEC60601 Test Probe Kit Includes Test Hook Standard Test Finger Unjointed Finger Probe etc. The PG-60601 contains the device listed in the core of the UL / IEC / EN 60601 requirements. It includes the following probes: 1. Jointed Finger Probe Diameter of finger: 12mm Length of finger: 80mm Diameter of baffle: 50mm Length of baffle: 100mm Thruster (optional) 10N Material: Insulating material (baffle and handle), stainless steel(finger) 2. 50mm Impact Test Ball 2.1 Impact steel

IEC60529 Stainless Steel Test Probe A with 50mm Test Sphere for IP1 Code Test Introduction: This probe is intended to verify protection of persons against access to hazardous parts for an IP1 Code. Also used to verify protection from access with the back of the hand for an IP suffix A code. The test probe A can be customized with 10N and 50N force. Specification: Diameter of test sphere: 50mm Diameter of baffle: 50mm Thickness of baffle: 4mm Diameter of handle: 10mm Length of

IEC60065 Test Hook for Audio and Video Made by 304 Stainless Steel 1. Introduction The test hook is designed according to IEC60065 clause 9.1.7 and figure 4. It is mainly applied to do the protection test against electric shock. During the test, the encolsure should have sufficient strength to withstand the damage of external forces and prevent electric shock damage, the hazard live parts shall not become accessible. The test request a directed outwards force of 20N should be

Precision Digital Pull-Push Force Gauge with Accuracy of 0.001N / Portable Force Gauge 1. Introduction The digital force gauge is a high precision and small size mechanical measuring instrument for pull and push force testing. Applicable to push-pull load test of electronic appliances, light industrial textiles, construction hardware, lighters and ignition devices, fire-fighting equipment, pens, locks, fishing gear, power machinery, scientific research institutions, etc. 2.

IEC60335-1 Test Finger Nail Probe with 0~50N Thruster CNAS Certificate Available 1. Introduction Finger nail probe is in accordance with the Figure 7 of IEC60335.1 and GB4706.1. Test finger nail is mainly used for the puncture-proof test of the accessible part of the solid insulation, also it is used to test whether the non-removable parts of an electric shock or release moving part are able to withstand the mechanical stresses that occur during normal use. 2. Specification:

Test Bar and Test Wire According to IEC61032 Test Probes 14 and 17 Made by Metal and Nylon 1. Test Probe 14 Introduction: Test probe 14 (Test bar : 3*1) designed according to IEC61032 Figure 10. This bar is intended to verify the protection against access to hazardous live parts of socket outlets through shutters. 20N force is recommended to be applied. 2. Test Probe 17 Introduction: Test probe 17 (test wire) designed according to IEC61032 Figure 11. This wire is intended to

IEC61032 Short Taper Test Pin / Conical Test Pin Φ3~4-length 15 / Test Probe 13 Made by Metal and Nylon 1. Introduction: Test probe 13 (conical short taper test pin : Φ3~4-length 15) is designed according to IEC61032 figure 9. The pin is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment (see IEC60536) 2.Specification: diameter of test pin head 3mm, bottom 4mm length of test pin 15mm diameter of baffle 25mm

IEC61032 Long Taper Test Pin / Cylindrical Pin Φ4-length 50 / Test Probe 12 Made by Metal and Nylon 1. Introduction: Test probe 12 (cylindrical long taper test pin : Φ4-length 50 ) is designed according to IEC61032 figure 8. This pin is intended to be used on appliances for verifying the inaccessibility of hazardous live parts or hazardous mechanical parts which are liable to be touched accidentally by a tool, for example a screwdriver or similar pointed object in normal use.

IEC61032 Unjointed Test Finger Probe / Rigid Test Finger / Test Probe 11 with 0~50N Thruster 1. Introduction: Test probe 11 (unjointed test finger) is designed according to IEC61032 figure 7 and UL clauses. This probe may be used to verify the protection of persons against access to hazardous parts, and to verify the mechanical strength of openings in the enclosure or internal barriers. 50N force recommend to be applied. 2. Specification: diameter of test finger 12mm Length

IEC61032 Rigid Finger Test Probe 11 customized with 50N or 75N Force Introduction: The rigid finger probe is designed according to IEC61032 figure 7 and UL clauses. This probe may be used to verify the protection of persons against access to hazardous parts, and to verify the mechanical strength of openings in the enclosure or internal barriers. It can be provided with a third-lab calibration certificate as customer's requirement. Specification: diameter of test finger 12mm

Articulated Children Test Finger Probe According to IEC61032 Figure 12 With Calibration Certificate Introduction: The Articulated Children Test Finger is a precision test probe made according to Figure 12 of the IEC 61032 (Test probe 18) and is used to simulate a children human finger. It is also used by the standards of CSA, IRAM, UL. IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts. The Articulated Children Test

IEC and UL Test Probe Kits Test Finger Probes for Accessibility Testing Access probe: a test probe simulating in a conventional manner a part a person or a tool, or the like , held by a person to verify adequate clearance from hazardous parts. Object probe: a test probe simulating a solid foreign object to verify the possibility of ingress into an enclosure. IP code probe: a test probe to verify the degrees of protection specified in IEC60529. Other probe: a test probe,

Portable Analog Force Gauge Pull - Push Gauge for Test Finger Probe 1.Feature ● High resolution: 1/200 scaleplate ● Hand-held equipment with small volume ● High accuracy: 0.5% ●Two units to read the test result: N, Kgf 2.Parameters Model Max. Range Min. Load & Accuracy Distance Range NK-10 10N 1Kgf 0.05 N 5gf 10mm NK-20 20N 2Kgf 0.1 N 10gf 10mm NK-30 30N 3Kgf 0.2 N 20gf 10mm NK-50 50N 5Kgf 0.25 N 25gf 10mm NK-100 100N 10Kgf 0.5 N 50gf 10mm NK-200 200N 20Kgf 1.0 N 100gf 10mm

Digital Force Gauge for Test Finger Probes 10N 50N 100N Optional Feature: 1) Accuracy: class 0.5, resolution: 0.001N 2) Peak value hold function. 3) Units: N, Kgf, 1bf 4) Memories: 888 groups 5) LCD display; with limit alarm function 6) With RS-232C port, equip with software, can output the change curve for analysis purpose. Parameter Model HP-2 HP-3 HP-5 HP-10 HP-20 HP-30 HP-50 HP-100 HP-200 HP-300 HP-500 HP-1K Max range 2N 3N 5N 10N 20N 30N 50N 100N 200N 300N 500N 1000N