Test Finger Probe

Introduction The electrical contact indicator is designer according to the requirements of “Household and similar electrical general requirements for safety” of GB4706 standard. It’s used with the test probes for preventing electric shock test. Parameters: 1). Input voltage: AC 220V 50Hz 1A 2). Output Voltage: AC 45V, 50Hz

IEC60065 Test plug for Antenna Coaxial Socket with Third-Lab Calibration Certificate 1. Introduction The test plug is designed according to IEC60065 figure 9, it is applied to test the antenna coaxial socket of live parts, and it should endure the mechanical strength during the endurance test, impact test, torque test and etc. 2. Specification ● Length j: 43±0.4mm ● Length g: 40±0.4mm ● Depth d: 9.1mm ● Depth e: 7.112mm ● Depth f: 0.8±0.4mm ● Outer diameter h: 12±0.4mm ●

Test Hook According to IEC60065 for Protection Test Against Electric Shock 1.Introduction The test hook is designed according to IEC60065:2005 and GB8898-2009. It is mainly applied to do the protection test against electric shock, it is a necessary tool for QC department. 2.Specification ●Length: 180mm ● Width: 8mm ● Length of hook: 5mm ● Thickness: 1mm

High precision Finger Nail Probe with 50N Thruster According to IEC60335 1. Introduction of Finger Nail Probe Finger nail probe is in accordance with the Figure 7 of IEC60335.1 and GB4706.1. The finger nail probe is mainly used for shocking or the non-removable parts of contacting with moving parts to determine whether it can withstand the mechanical pressure in normal use, to reach the required level of protection test. Exert pressure: 10N, 20N, 30N, 40N, 50N. 2. Picture of

PA140A UL Test Finger Probe Film Coated Wire Conforms to UL1278 with CNAS Certificate Introduction Hazardous moving part probe is conforms to the standards of UL507 figure 8.1 (PA160B), UL1278 figure 9.1 (PA160). It is applied to test the accessibility to hazardous moving parts such as access to fan blades through a fan finger guard. The handle is made of nylon, the finger is made by stainless steel. Specification Rigid finger length 101.6mm (4 inch) Rigid finger diameter Φ25

PA160B UL Test Finger Probe Hazardous Moving Parts Probe for Fan Blades Introduction Hazardous moving part probe is conforms to the standards of UL507 figure 8.1 (PA160B), UL1278 figure 9.1 (PA160). It is applied to test the accessibility to hazardous moving parts such as access to fan blades through a fan finger guard. The handle is made of nylon, the finger is made by stainless steel. Specification Rigid finger length 88.9mm (3.5 inch) Head length 25.4mm (1 inch) Head

PA130 UL Accessibility Test Probe for Uninsulated Live Part Conforms to UL507 Introduction UL accessiliby test probe for uninsulated live part is designed according to UL507 figure 9.1 (PA135A) and UL1278 figure 8.1 (PA130A). The handle is made by nylon and tip is made by stainless steel. Specification Rigid finger length 101.6mm (4 inch) Rigid finger diameter Φ12.7mm (1/2 inch) Head length 14.3mm (9/16 inch) Head radius R4.8mm (3/16 inch) Tail diameter 191.mm (3/4 inch)

Test Bar Probe 43 Person Against Access to Hot or Glowing Parts Introduction: It is designed according to IEC61032 figure 17. This bar is intended to verify the protection of fixed and portable visibly glowing radiant heaters. Specification: Thickness of probe 5mm Width of probe 50mm Length of probe 80mm Material metal and insulating material Picture: Probe List: Probes and application Probe code Short description Force to be applied Access probes of IEC60529 (IP code) Probe

Introduction: It is designed according to IEC61032 figure 16, and meet the requirements of IEC60065. This bar is intended to verify the protection of fixed and portable visibly glowing radiant heaters. Specification: Diameter of probe 30mm Length of probe 80mm Diameter of handle 50mm Length of handle 80mm Material insulating material (handle), probe (metal) Picture: Probe List: Probes and application Probe

IEC61032 Test Probe 32 Test Rod with Third - Lab Calibration Certificate Introduction: It is designed according to IEC61032 figure 15. This rod is intended to verify the protection provided by fan guards access to hazardous mechanical parts, equip with nylon handle. Specification: Diameter of the rod 25mm Material insulating material and metal Picture: Probe List: Probes and application Probe code Short description Force to be applied Access probes of IEC60529 (IP code) Probe

Test Probe 19 Child Small Finger Probe According to IEC61032 with 10N Force Applied Introduction: It is designed according to IEC61032 figure 13. This Probe is intended to simulate access to hazardous parts by children of 36 months or less. Specification: Diameter of probe 5.6mm Semi-diameter of probe 2.8mm Length of probe 44mm Diameter of first handle 25.9mm Length of first handle 101.6mm Diameter of second handle 25.4mm Length of second handle 464.3mm Material Insulating

Accessability Test Finger Probe 17 Test Wire Conforms to IEC61032 for Electrical Toys Introduction: It’s designed according to IEC61032 Figure 11. This wire is intended to verify protection against access to hazardous live parts electrical toys. Picture: Probe List: Probes and application Probe code Short description Force to be applied Access probes of IEC60529 (IP code) Probe A Sphere:Φ50 with handle 50 Probe B Jointed test finger 10 Probe C Rod: Φ2.5-length 100 3 Probe D

Accessability Test Finger Probe 14 Test Bar Conforms to IEC61032 with CNAS Certificate Introduction: It’s designed according to IEC61032 Figure 10. This bar is intended to verify the protection against access to hazardous live parts of socket outlets through shutters. Picture: Probe List: Probes and application Probe code Short description Force to be applied Access probes of IEC60529 (IP code) Probe A Sphere:Φ50 with handle 50 Probe B Jointed test finger 10 Probe C Rod: Φ2.5

Test Probe 13 Conincal Pin Conforms to IEC61032 Accessability Test Finger Probe Introduction: It is designed according to IEC61032 figure 9. The pin is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment (see IEC60536). Specification: diameter of test pin head 3mm, bottom 4mm length of test pin 15mm diameter of baffle 25mm thickness of baffle 4mm material insulating material, metal Picture: Probe List: Probes

Test Probe 12 Cylindrical Pin Conforms to IEC61032 Accessability Test Finger Probe Introduction: It is designed according to IEC61032 figure 8. This pin is intended to be used on appliances for verifying the inaccessibility of hazardous live parts or hazardous mechanical parts which are liable to be touched accidentally by a tool, for example a screwdriver or similar pointed object in normal use. Specification: diameter of test probe 4mm length of test probe 25mm diameter of

IEC61032 Test Finger Probe D Test Wire for IP4X Testing with CNAS Certificate Introduction: Designed according to IEC61032 figure 4, meet the requirements of IEC60529-IP3,IEC60065,IEC60598 and etc. This wire is intended to verify the protection of persons against access to hazardous parts. It is used to verify the protection against access with a wire. Specification: Length of test wire: 100mm Diameter of test wire: 1mm Diameter of stop sphere: 35mm Diameter of handle: 10mm

EV Connectors Testing Equipment IEC 62196 Test Finger Probe B with 42V Electric Indicator 1. Introduction of Test Finger Probe B: Test finger probe B is a high precision test equipment whcih can be used to test the EV socket-outlets and vehicle connectors, it's strictly designed according to IEC61032 figure 2, and meets the requirements of IEC62196-1 clause 10.1, UL507, UL1278 figure 8 and IEC60529 figure 2. The test finger probe is intended to verify the basic protection

EV Connectors Testing Equipment IEC 62196 Test Finger Probe B with 42V Electric Indicator Test Finger Probe B is a high-precision testing instrument designed specifically for evaluating EV socket-outlets and vehicle connectors. Manufactured in strict compliance with international safety standards, this equipment ensures reliable protection testing for electrical components. Product Overview The Test Finger Probe B is engineered to verify basic protection against access to

Surface Temperature Measuring Test Finger Probe IEC60335-2-11 for Tumble Dryer IEC60335-2-11 Surface Temperature Measuring Probe for Tumble Dryers This specialized test probe is engineered according to IEC60335-2-11 figure 101 and IEC6335-2-6 standards, specifically designed for measuring surface temperature rise on the front and side surfaces of cookers, ovens, and tumble dryers. Technical Specifications Component Specification Copper Sheet Φ5mm × 0.5mm thickness Thermocoupl

IEC60335-2-14 Similar Test Probe B with 125mm Circular Stop Face for Verifying the Stability and Mechanical Hazards of the Kitchen Machines 1. Introduction Similar test probe B is designed to meet the test requirements of IEC60335-2-14 clause 20.2, the finger part except the length is same as the test probe B of IEC61032, but having a circular stop face with a diameter of 125mm, and the distance between the tip of the test finger and the stop face being 100mm. The finger part