Cam Clutch Bearing

Dimensions and Capacities Model Torque Capacity (Nm) Drag Torque (Nm) Max. Overrunning (r/min) Max. indexing (cycle/ min) Max.Radial Load When Overrunning (kgf) Bore Size A B C D E Outer Race Keyway Weight ( kg ) Inner Race Dia. (H7) Key way LD04 5.88 0.2 300 100 20 10 4x1.5 19.5 23.9 24 47 -0.014 -0.039 40 5x3 0.25 LD05 9.8 0.29 300 100 30 14 5x2 19.5 23.9 24 52 -0.017 -0.042 45 5x3 0.3 LD06 19.6 0.29 200 100 50 20 5x2 19

Features Type MZ is a sealed, sprag type freewheel, bearing supported using two 60..ZZ series grease lubrucated bearings. Units are delivered grease lubricated ready for installation. MZ units are intended as multipurpose, to be used in various applicatoins. A typical mounting arrangement is shown on the following page. The inner race is keyed to the shaft. The inside diameter of the outer race should be used as the mounting register for the connected

Features 1. Specially treated cams are used to achieve better wear resistance. 2. Feeding drive for bag-making machines or coiling machines Technical Datas Item MI20S Precision P6 Type cam Bore size (mm) 20 Outer race (mm) 80 Torque (KN) 43.1 Max. Inner race overrunning (cycle/min) 300 Drag Torque(Nm) 0.29 Weight (kg) 1.9 Package Carton Box / Wooden Box Delivery time 7-10 days after order confirmed Payment terms L/C, T/T, D

Installation and Usage 1. For installation, insert the clutch into the hub bore of a pulley, a gear, or a torque arm and screw the bolts (high tension) into the tapped holes in the end face of the clutch. See illustration on the right. 2. A press fit is required for MX Series clutches for indexing applications, but do not exceed 0.025 mm when press fitting. 3. Adjust the side of the key to fit the keyway tightly, but

Features Type SMZ is a sealed, sprag type freewheel, bearing supported using two 60..ZZ series grease lubricated bearings. Units are delivered grease lubricated ready for installation. SMZ units are intended as multipurpose, to be used in various applications. A typical mounting arrangement is shown on the following page. The inner race is keyed to the shaft. The inside diameter of the outer race (dimension D4) should be used

Lubrication BREU series Cam Clutches need periodic maintenance and lubrication to both bearing to provide maximum performance throughout their service life. Lack of prescribed maintenance and lubrication will shorten the Service life of Cam Clutch and may cause unnecessary mechanical damage. Dimensions and Capacities Model BoreSize Keyway A B C D E F G H I J S Weight H7 InnerRace 　 　 h7 　 　 　 　 　 　 　 　 kg BREU30(K)-C 30 8×3

Features Complete Freewheels FBF with mounting flange are sealed sprag freewheels with ball bearings. They are supplied oil-filled and ready for installation. The freewheels FBF are used as: ➧ Backstops ➧ Overrunning Clutches ➧ Indexing Freewheels In addition to the standard type, four other types are available for extended service life and indexing accuracy. Nominal torques up to 160 000 Nm. Bores up to 300 mm. Many

Installation and Usage 1. The bores of the pulley, sprocket, etc., should have a tolerance of H6 or H7. 2. Built in roller type bearing, due to the structure of cam and roller. 3. When installing the Cam Clutch on the shaft, press the clutch inner race slightly. 4. Never apply thrust loads to the Cam Clutch. Other devices Should be provided to take up thrust loads applied to the Cam Clutch. 5. In case of large radial loads

Dimension and Capacity Model Bore mm Torque Nm Speed 1)r/min Speed 2)r/min Speed 3)r/min Dimensions (mm) Weight (kg) RSBI dH7 Dh6 D1h6 D2h7 D3 D4 d5 z L I I1 I4 fx45 dmin I2 I3 RSBI F8 60 1375 200 490 6100 175 85 125 155 M10 - 8 60 50 36 5 2 110 12 35 6.5 1.8 70 2000 210 480 4500 190 95 140 165 M10 - 12 60 50 36 5 2 120 12 35 8.6 1.9 80 3125 190 450 4000 210 115 160 185 M10 - 12 70 60 36 5 2 140 12 35 12.5 2.6 90 4125 180

Features Types AL, ALP are roller type freewheels. These units are part of the modular system. They are bearing supported, using two 160.. series bearings, and require oil lubrication. These units may be used in designs providing oil lubrication and sealing as on the example overleaf. The bearings must not be axially stressed. Typically, types AL, ALP are used with standard covers that are designed to transmit torque, and

Features Irreversible Locks IR are bidirectional acting roller freewheels with bearing support. They are ready for installation. The Irreversible Locks IR are used as: ➧ Bidirectional Acting Backstops Nominal torques up to 100 Nm. Bores up to 35 mm. Whereas a normal Freewheel transmits torques from the driving or driven side in only one irection of rotation, with the Irreversible Lock IR it is possible for the driving

Features Type KI is a roller type freewheel. It is an assembly comprising of an inner race and rollers fitted into a polyamide cage. This type of unit can not be dismantled. It is designed for small mechanisms in office equipment, or packaging machines, to be mounted inside gears or feed rollers. The gear or feed roller inner diameter is used as the outer race. Additional bearing support is required, and the freewheel must

GLP...F7D7 Flange Freewheel Bearing Backstop Clutch GLP30F7D7 Features GL type freewheels have 160.. Series ball bearings that are used to center the inner race with the outer race. the torque forces are transmitted from the shaft to the inner race by means of the key and from the outer race to the external area by means of screws. shaft tolerances must be h6 or j6 and outer race key tolerances h7. either grease or oil lubrication must be applied to the freewheels before

Features Suma Mechanical Clutches offer the most complete and versatile selection of backstop, overriding, and index cluthes in the industry HT series clutch is designed for indexing operations. Not symmetrical so order according to the rotation required Created for applications requiring space restrictions