Patient Monitor Accessories

ACUTRONIC 151120 Flow Sensor SPU Neonatal for Fabian Series Ventilator Machine Replacement Accessories Description ACUTRONIC 151120 is a highly sensitive flow sensor specially designed for newborns. It can accurately monitor extremely weak respiratory airflow and provide real-time feedback to the ventilator to ensure ventilation safety. Functions: - Precisely monitors minute airflows: Newborns have extremely small tidal volumes (typically only 3-5 ml), and this sensor can

Hamil-ton Replacement Ventilator Filter Kit PN 16127501 for C1 T1 Brief introduction This filter kit, designed specifically for HAMIL-TON C1 and T1 ventilators, provides critical protection for both the inspiratory and expiratory sides of the breathing circuit. Each kit contains a high-efficiency hydrophobic bacterial and viral filter, installed at the device port to form a reliable two-way contamination barrier. These consumables are manufactured by Hamil-ton Medical to

MX450 Patient Monitor LCD Display 12 inch NL12880BC20-05 new original ► Brief Description The MX450 Patient Monitor LCD Display is a 12-inch, gray-colored LCD monitor weighing approximately 0.5 kg. It features a resolution of 1280×800 and an aspect ratio of 16:10. Utilizing UA-SFT technology, the liquid crystal molecules align parallel to the panel surface, achieving a symmetrical ultra-wide viewing angle of 88° horizontally and vertically. In medical monitoring scenarios,

Delta Electronics VP EOE94070290 Medical Device Power Supply Unit for Diagnostic Imaging Equipment Product Description This is a VP power module made by Delta Electronics, model EOE94070290. Its metal enclosure feels solid, with heat dissipation holes and fixing clips on the surface, plus a handle that makes it easy to carry when installing or maintaining. It can output multiple DC voltages like +3.3V, +5V, +12V, +24V, which perfectly meet the power needs of various

CONTEC TLC5000 Lead Ambulatory ECG Recorder / 24H Continuous Holter Monitor ► Brief Description The CONTEC TLC5000 is a 12-lead dynamic electrocardiogram (ECG) recorder capable of continuously recording ECG waveforms for up to 24 hours. The recording cartridge features an OLED screen with a resolution of 160×128 and a built-in TFT memory card with a maximum capacity of 2GB, allowing for complete storage of raw data without compression. ECG data is first stored in the

Mindray 040-001949-00 Spirometry Flow Sensor for Adult and Pediatric Patient Monitor 3.3 Meters Description Mindray's 040-001949-00 spiroflow sensor is a disposable accessory on a patient monitor used to monitor respiratory function. It is mainly used to continuously monitor the patient's respiratory status, especially during anesthesia, sedation, or recovery, to help determine whether ventilation is normal. Application Scenarios: - Anesthesia Recovery Room: Monitors the

Mindray D3 defibrillator complete cover includes the front shell, rear shell, and tray ► Brief Description The Mindray D3 defibrillator complete cover includes the front shell, rear shell, and tray. Together, they form a complete and sophisticated protective shell system. The front shell handles operation and front protection, the rear shell houses the core modules and rear interfaces, and the tray ensures handle storage and rapid response. Each component performs its

Samsung Ultrasound Transducer V4-8 Curved Array Probe ► Brief Description The Samsung V4-8 probe is a high-performance Curved Array 3D/4D volumetric ultrasound probe. With a frequency range of 4.0 – 8.0 MHz, it is primarily used in abdominal, obstetric, and gynecological procedures, and is compatible with ultrasound equipment such as the Samsung WS80A, WS80A Elite, RS80A, and Accuvix A30. This probe can be applied to multiple key clinical areas and provides optimized preset

Replacement 25.2V 4.8ah Battery 20382407-M1 for Puritan Bennett 560 ► Brief Description Battery 20382407-M1 is a 25.2V, 4.8Ah rechargeable lithium battery designed to replace the original battery in the Puritan Bennett 560 ventilator. Although a compatible battery, it has undergone rigorous quality and safety testing, and its performance meets or exceeds original specifications. A brand-new battery, fully charged and with fewer than 50 charge-discharge cycles at 25°C, can

Dräger 8404065 Gasket Seal Replacement for Ventilator Gas Path System Maintenance Product Description This is a genuine Dräger Gasket, part number 8404065, designed for critical sealing points in anesthesia machines and ventilators. Visually, it is a small, flat, circular or rectangular elastomer gasket packaged in a clear, resealable plastic bag with a printed label indicating “Gasket”, reference number, and “Quality by Dräger”. Functionally, it creates a leak-proof seal

RESMED Stellar 100 150 Series Rechargeable Li-ion Battery Li41-2301 for Ventilator Machine Description Specification: Manufacture: HuaLiu Model: Li41-2301 Voltage: 14.8V Capacity: 2.6Ah 38.48Wh Type: Rechargeable Li-ion Application: RESMED Stellar 100 150 Series Ventilator Function: - Power outage emergency protection: When the external power supply is interrupted, the built-in battery can immediately take over the power supply to maintain the normal operation of the

4050 RD SET DCI SpO2 Sensor Adult Finger Clip Reusable for Patient Monitoring Description The 4050 is an RD SET finger clip SpO2 sensor for adult (>30 kg) monitoring on RD SET–enabled devices including the Rad-97, Rad-67, and compatible LIFEPAK 15 and Zoll X Series configurations. This SpO2 sensor adopts a finger clip type and is suitable for adults. It is mainly used to accurately monitor blood oxygen saturation and pulse rate. It is suitable for various bedside monitors

PHiliph Probe Crystal 1.0M hz DLP-002-0302 Compatible Parts for M2736A US Transducer Description The M2736A is an ultrasound probe for fetal heart rate monitoring. It incorporates multiple piezoelectric ceramic crystals to generate a wide-angle ultrasound beam, covering a larger area of the pregnant woman's abdomen and preventing signal loss due to slight fetal movement, thus improving signal capture stability. The crystals utilize highly efficient piezoelectric materials to

Edan CADENCE II fetal monitor power switch button 11.13.17575 spare part ► Brief Description The power switch button, part number 11.13.17575, is for the EDAN CADENCE II fetal monitor. This power switch with two black and white cables. It is located on the right panel of the monitor and is the core control component for turning the device on and off. The power board provides multiple voltage outputs (+12V, -12V, +5V, etc.) for normal operation and is responsible for charging

OLYMPUS Rechargeable Li-ION Battery ND2034OL34 14.4V 3.4Ah 49Wh for for Olympus Vanta Analyzers OLYMPUS Rechargeable Li-ION Battery ND2034OL34 ► Brief Introduction This is a rechargeable lithium-ion battery pack for Olympus Vanta Analyzers. The battery is an original Olympus product, designed specifically for the Vanta series handheld spectrometers. Model number ND2034OL34, the battery voltage is 14.4V, capacity is 3.4Ah, and it is marked with instructions to charge using a

Masima M-LNCS DCI Spo2 Sensor REF2501-Adult Reusable Finger Clip New Original ► Brief Description The M-LNCS DCI Spo2 Sensor REF2501, white in color and made of silicone, monitors blood oxygen saturation in the range of 70%-100%. It is a reusable finger clip-on blood oxygen sensor for adults, complete with its original packaging. It measures 3ft/0.9 meters in length and uses an M-LNCS 15-pin D-sub connector at the distal end. While providing high-performance blood oxygen

Ham-ilton medical REF 369108 Lithium-ion(LI-ION) rechargeable battery 10.8V space part C1 , T1 monitor part Core Function: Medical-Grade Critical Backup Power REF 369108 represents Ham-ilton Medical’s proprietary lithium-ion power solution engineered for its ventilator series. As an essential energy component for life-support systems in ICUs, emergency departments, and patient transport, its primary function is to deliver uninterrupted respiratory support during: Intra

Maquet Expiratory Cassette 6447960 for Servo-I and Servo-S Ventilator ► Brief Description Maquet Expiratory Cassette, part number 6447960, is white and compatible with Servo-I and Servo-S ventilators. This expiratory cartridge integrates the expiratory channel, flow measurement device, and expiratory valve into a single unit, offering significant advantages such as interchangeability, easy cleaning, and high reliability. It is interchangeable between different Servo-i/s

HAMI-LTON C1 161186 Expiratory Valve - New Original Medical Equipment Precision Ventilation Control for ICU and Hospital Use The HAMI-LTON C1 161186 valve integrates a high-precision pressure sensor to continuously monitor airway pressure changes. This real-time data enables immediate ventilator adjustments, creating a perfect closed-loop control system for optimal patient ventilation. Key Features and Benefits Provides highly stable and accurate positive end-expiratory

Contec NIBP Cuff Child 18-26 CM 2.3.11.00003 IGN003 Grey Color for Hospital ICU Clinic ► Brief Description Contec NIBP Cuff is sophisticated and durable. Made of durable stretch nylon, it is comfortable and easy to clean. Rounded corners provide patient comfort. Designed for use with multiple patients in low-intensity care settings. Ideal for use in medical offices with reduced risk of contamination. Designed for patient safety, comfort and accuracy • Constructed of materials