EV Connector Testing Equipment

Complies with IEC 62196-1 and IEC60309-1. Tests cable accessories for tensile force and torque resistance. Features PLC automatic control, adjustable tension up to 500N, and torque up to 11.0 Nm. Durable design with power-off protection and customizable test cycles.

Complies with IEC60950-1, IEC60598-1, and IEC60065. Features a 535g steel ball, adjustable drop height 0.4-1.5m, and electric lifting. Ideal for impact testing on IT equipment and lighting fixtures. Durable, precise, and customizable.

Complies with IEC 61032, IEC 60529 IP1X, and IEC 60065. Features a 50mm spherical probe for verifying protection against access to hazardous parts. Customizable with alligator clip for anti-electric shock testing or M6 threaded hole for enclosure protection. Optional model with 50N force available.

Conforms to IEC 62196-1:2022 clause 13.2.1 fig 11. Set of 16 die steel gauges for EV connector charging function testing. Supports national, European, and American standards. Features automated test system with configurable parameters, QR code traceability, and MES connectivity.

Automated test system for AC charging guns and piles compliant with IEC/EN 61851, IEC 62196, and EN 62752. Supports single-phase and three-phase products up to 40A and 420V. Features flexible parameter configuration, QR code traceability, and MES connectivity for R&D and production inspection.

Compliant with IEC62196-1 and IEC60309-1, this equipment performs mechanical load flexing tests on EV plugs and socket-outlets. Features servo motor drive, adjustable flexing angle 0-360°, and load weights up to 100N. PLC control with touch interface ensures precise testing.

Complies with IEC62368-1:2019 Appendix R. Features programmable DC 10-300V discharge, peak current up to 14KA (10KA sine wave), and 50±2Hz damped oscillation. Includes touchscreen control, automatic loop analysis, and overvoltage protection. Ideal for 3MVA lab testing.

Complies with IEC 62196-1 Ed.4CDV 2020 clause 30 for rust testing in saturated water vapor. Features microcomputer temperature control, PT-100 sensor, SUS#316 inner chamber, and fully automatic operation. Custom input power available.

Complies with IEC 62196-1 Ed.4CDV 2020 clause 30. Features a 304 stainless steel liner, digital temperature control, and bottom water stirring for uniform temperature. Offers constant temperature range from room temperature to 25°C with ±2°C accuracy. Ideal for EV connector testing.

Conforms to IEC 62196-1 clause 26.6. Applies 75N force to test shutter endurance. Stainless steel rod with three test pins. Custom force options available. Ensures plug contacts do not touch live parts.

Complies with IEC 62196-1 Ed.4 CDV 2020 clause 26.5 table 15. Includes two torque wrenches (1.5-30 N.m and 6.75-135 N.m), vice, and mandrels from 5 to 40 mm. Custom mandrel diameters available upon request.

Complies with IEC 62196-1 Ed.4 CDV 2020 clause 15 for thermal aging tests on polymer materials. Features PID control, double over-temperature protection, and natural air circulation. Inner chamber SUS#304 stainless steel. Custom options available.

Compliant with IEC62196-3 clause 36.3, this test apparatus simulates offset forces in four directions to verify charging interface compressive strength. Features PLC control, touch screen, 100N force sensor, and adjustable timing. Durable 260kg build with custom power options.

Compliant with IEC 62196-1 and IEC 60309-1, this test equipment evaluates EV plugs and sockets under specified pull force and torque. Features motor-driven pull cycles up to 9999, adjustable torque up to 11 N.m, and universal fixture. Durable, precise, and customizable for global power supply.

Compliant with IEC 62196-1 and IEC 60309-1 standards. PLC intelligent control with touch screen, servo motor drive, adjustable 3-axis clamp, and 0-100mm linear stroke. Supports breaking capacity and normal operating life tests with customizable cycles and safety protections.

Compliant with IEC 62196-1 clause 33.2/33.3, this tester simulates vehicle rollover damage with 5000N or 11000N crushing force. Features PLC control, motor drive, and 8 km/h rolling speed. Durable steel frame with adjustable fixtures for accurate testing.

Conforms to IEC62196-3 clause 36.3 for misalignment testing of EV plugs and connectors. Features servo-driven X/Y sliding table, 0-500N force range, PLC control, and automatic multi-direction force application. Ideal for temperature rise and mechanical load tests.

Compliant with IEC 60227-1 and IEC 60227-2 for bending and snatch testing of EV cables and PVC insulated cords. Features PLC control, touch screen operation, adjustable bending angle 0-360°, and 0.5kg load. Durable motor-driven design with customizable test parameters for reliable quality verification.

PLC controlled flexing tester for EV non-rewireable accessories per IEC62196-1 & IEC60309-1. Features servo motor drive, 0-360° adjustable angle, 0-60 cycles/min, built-in load up to 400A. Durable, high precision, customizable test cycles up to 999999.

Compliant with IEC 62196-1/3 and IEC 60309-1. Features 8 temperature channels, AC 0.5-400A constant current output, touch screen control, and USB data logging. Ideal for charging pile connector heating assessment.