Forged Steel Valve

ANSI Regular Port Welded Bonnet NPT Ball type Check Valve Product Specification: - Size: 1/2″-2″ - Pressure:150lb-2500lb Design Features: - Bolted bonnet with spiral-wound gasket - Lift or Piston Check - Ball check - Swing check End Connection: - End Flange: ANSI B16.5 - End to End: DHV Standard - Screwed Ends (NPT) to ANSI/ASME B1.20.1 - Socket weld Ends to ASME B16.11 - Butt weld Ends to ASME B16.25 Optional Features: - Cast Steel, Alloy Steel, Stainless Steel - Full Port

RTJ A105 Bolted Bonnet Forged Gate Valve Specification: 1. Design & Manufacture: API 602 2. Constructions: OS&Y, Bolted Bonnet, Welded Bonnet & Pressure Sealed Bonnet; 3. Bore Type: Full Port 4. Size Range: 1/2" to 2". 5. Pressure Ratings: ANSI 150, 300, 600, 900, 1500 & 2500LBS 6. End Connections: Flanged (RF, RTJ) Other Ends Also Available: Threaded (Screwed, NPT), Butt weld (BW), Socket Weld (SW). 7. Materials Available in: A105 (N), LF2, F5, F11, F22, F304, F316, F5

1500LB Y Pattern F304 Pressure Sealing Globe Valve with BW,NPT Forged globe valves smaller than 2"(DN50), forged steel valves are recommended. Compared with castings, forged valve bodies offer the advantages of more uniform structure, greater density, higher strength integrity, enhanced dimensional characteristics and closer dimensional tolerances. The design of forged steel globe valves are also various: Full port, conventional port / reduced port; bolt bonnet, welded bonnet

2500LB BW Extended Nipples Forged Globe Valve Forged globe valves smaller than 2"(DN50), forged steel valves are recommended. Compared with castings, forged valve bodies offer the advantages of more uniform structure, greater density, higher strength integrity, enhanced dimensional characteristics and closer dimensional tolerances. The design of forged steel globe valves are also various: Full port, conventional port / reduced port; bolt bonnet, welded bonnet and pressure

SW Rising Stem Pressure Seal Bonnet Forged Gate Valve​ Product Features: - Size Range: 1/2” – 2” - Pressure Class: ASME 150 – 2500 - Connection: Flanged, Threaded or Socket Weld Ends, Bolted or Welded Bonnet - Available Material: Carbon Steel, Stainless Steel, Duplex Stainless Steel, Alloy 20, Inconel DESIGN FEATURES: - Forged Carbon, Stainless or Alloy Steel Materials - Available in all trim configurations - Full Port option available for classes 150 - 2500 - API Standards:

Bolted Bonnet Forged Steel Gate Valve Forged valves are designed in accordance with the API/BS/ASME standards. It has various End connection such as butt / socket welded, flange and screwed ends. The valves are applied mainly in hydrogen service and exposed to high temperature and pressure. Applicable Standards: - Nominal Diameter: 2"～24" (DN50-DN600) - Pressure Rating: ASME CLASS 900~2500(PN150~PN420) - Body material: Carbon steel, Alloy steel - End connection: RF, BW, RTJ -

3 Piese 900LB SW Forged Steel Ball Valve The Forged steel socket welded floating ball valve Two piece , three piece body structure. Square body and round body type for choice. Both side NPT ends, SW ends,One side NPT,One side is SW. One side need to extend ,One side not need. Suit for below of DN50 . Product Specification: Size:1/2"-3" Pressure:150-2500lb Material:F304,A105,F316,F11 Three piece body, split body Both side with 100mm pipe ends Thread and Socket welded Design

Forged Steel Check Valves EDVC forged steel check valves are available in three bonnet designs. The first design is the Bolted Bonnet, with male-female joint, spiral wound gasket, made in F304/graphite. Ring joint gasket are also available on request. The second design is the welded bonnet with a threaded and seal welded joint. On request a full penetration strength welded joint is available. The third design is the pressure seal bonnet, with a threaded and pressure seal

API602 ASME B16.34 Forged Steel Globe Valve EDVC forged steel globe valves are available in three bonnet designs. The first design is the Bolted Bonnet, with male-female joint ,spiral wound gasket, made in F304/graphite. Ring joint gasket are also available on request. The second design is the welded bonnet with a threaded and seal welded joint. On request a full penetration strength welded joint is available. The third design is the pressure seal bonnet, with a threaded and

Forged Steel Outside Screw &Yoke Gate Valve EDVC forged steel gate valves are available in three bonnet designs. The first design is the Bolted Bonnet, with male-female joint, spiral wound gasket, made in F304/graphite. Ring joint gasket are also available on request. The second design is the welded bonnet with a threaded and seal welded joint. On request a full penetration strength welded joint is available. The third design is the pressure seal bonnet, with a threaded and

Reduce Bore Bolted Bonnet Flange End Forged Steel Gate Valve Standards: API 602: Steel wedge gate valve for Sizes 4" and Smaller for the Petroleum and Natural Gas Industries. BS 5352: Specification for Steel Wedge Gate Valves 50 mm and Smaller for the Petroleum, Petrochemical and Allied Industries. Test : API598 Report: CHEMICAL ANALYSIS OF MATERIAL CERTIFAICATE EN 10204 3.1B Product Features: Size Range: 1/2" - 2" / DN15—DN200 Pressure rating: ANSI Class150LB- 2500LB / PN16-

3 Piese 900LB SW Forged Steel Ball Valve The Forged steel socket welded floating ball valve Two piece , three piece body structure. Square body and round body type for choice. Both side NPT ends, SW ends,One side NPT,One side is SW. One side need to extend ,One side not need. Suit for below of DN50 . SPECIFICATION Valve Body Pressure Rating Class 800,Max 1975 psig @ 100 F(Carbon Steel)Temperature Rating As per ASME B16.34 dependant on Seat Material selection Body Three-piece