Low Temperature Valve

LOW TEMPERATURE CRYOGENIC ball VALVE Fully designed to cover BS6364 requirements for full tightness in medium and severe cryogenic service. This execution has been fully tested at -196°. Extended stem length is adapted to the valve size according to BS6364 – thermal fins isolate the stem tightness from the cold temperature. Product Information · Excellent internal and external sealing performance at cryogenic service · Strict cryogenic treatment · Middle flange quantitative

BS1873 Extended Bonnet Cryogenic Globe Valve Cryogenic Globe Valve are adapted to special service conditions at cryogenic temperatures. Feature: -Extended bonnet -Low emission packing -low temperature gasket and packing -overlaying stellite onto sealing surface -All cryogenic valves are thoroughly degreased and cleaned and pipe ends are sealed to prevent contamination. -Prevent stem unstability structure Product Range : - Size: NPS 2"-16" DN50~DN400 - Pressure: Class 150LBS

Stainless Steel Cryogenic Swing Check Valve Cryogenic valves are specially designed for gas treatment processes and storage and transportation of liquefied gasses such as LNG, liquid nitrogen, Oxygen,. Etc. These valves are required to be operated to give assured leakage rates. These valves which are recommended to use below -50⁰C are designed with a extended bonnet which separates the operator and stem seal from the cold temperature. 12” gas column is a standard feature for

Cryogenic gate valve This valve is designed to withstand the harsh working conditions of industrial processes. It is especially suitable for working conditions with severely low or cryogenic temperatures of up to -150°C. It is made to carry and store cryogenic media efficiently and safely. A cryogenic gate valve is usually made from carbon steel, stainless steel, and cast steel. Moreover, it is made with an extended bonnet to protect the stem from the extremely cold media.

Top Entry 300LB Butt Weled Cryogenic Butterfly Valve Design Features: Cryogenic triple-offset valves Cryogenic extension in accordance with international & customer standards Quarter Turn non-rubbing & frictionless sealing Low fugitive emissions in compliance with ISO 15848 & API 622 Anti Blow-Out stem design in full compliance with API 609 Optimized disc design for maximum flow capacity Resilient metal-to-metal seal Bi-directional torque seated design Inherently Fire-Safe

Cryogenic Ball Valve EDVC Cryogenice ball valve application can exist in combination with other service conditions, including corrosive & dirty applications with toxic substances, flammable liquids (LNG, LPG or NGL condensate) or generic hydrocarbon gas in high pressure or high temperature applications. Design temperature from -51° to -100°C (-59,8° to -148°F) Ball valves for this temperature range should comply to customer specific requirements and shall be tested according

High Pressure API 6D Cryogenic Ball Valve PN10~PN160 Product Information · Excellent internal and external sealing performance at cryogenic service · Strict cryogenic treatment · Middle flange quantitative compression · Blow-out proof valve stem · Valve stem extension design · Pressure self-relief design of valve pocket Performance data · Pressure Rating: CLASS 150~CLASS900(PN10~PN160) · Bore Size: 1/2″~48″(DN15~DN1200) · Working Temperature: -196℃~-46℃ · Body Material: Low

3'~ 60' Low Temperature Valve API600 Cryogenic Butterfly Valve The Cryogenic Butterfly Valve Design Pressure Rating : ANSI Class 150/300 Bi-directional design. Working pressure 10barg, 16barg With butt-welding ends or flanged ends With inspection / maintenance access (side entry) Double offset shaft, Triple offset shaft Solid double piece shaft Valve may be fitted in any orientation Standard Compliance : BS 6364 Valves for cryogenic service Fire Safe approved in accordance