Cast Steel Globe Valves

2500LB WCC Pressure Seal Globe Valve The pressure seal valves are designed in accordance with BS1873 and ASME B16.34 for service of high temperature and high pressure and are widely used in fossil fuel power plant. Compared with bolted bonnet joint valves, it provides absolute reliable sealing of the bonnet joint, so that the pressure seal valves are more compact and rigid as well as maintenance cost-effective at high temperature and high pressure service. The two openings

DIN F5 PN16 Ring Stem Stellite Seated Globe Valve DIN globe valves are designed and manufactured to DIN 3356, BS 1873, EN 13709/EN 12516. Its face to face dimensions conform to DIN 3202, EN 558-1. The FF, RF or RTJ flanged ends are furnished in accordance to EN 1092-1, DIN 2543~DIN 2550. Test & Inspection: DIN 3230. Pressure Range: PN16~PN100. Typically, DIN globe valves are made from cast steel with outside screw & yoke(OS&Y) and rising stem. Long-cycle life bellow seal

CF8M Bolted Bonnet Y-Pattern Globe Valve The Bolted Bonnet Y-Pattern Globe Valve is a durable, high-performance small bore globe valve that is forged and equipped with a bolted-bonnet design for improved maintenance. Y pattern globe valve are used as an alternative for the high pressure drop inherent in standard globe valves. The Y type design reduces the flow resistance of the globe valve to a minimum. Seat and stem are angled at approximately 45 degrees, which gives a

API603 Corrosion Resistant Angel Type Globe Valves Angle type Globe Valves are designed and manufactured according to Standards BS1873, ASME B16.34 or DIN3202, and special customers’requirements.designed with a 90 degree between inlet and outlet to suitable for the angle pipe, Featured with compact structure & Tight shut off servic Description & Features: Angle type Globe Valves are designed and manufactured according to Standards BS1873, ASME B16.34 or DIN3202, and special

OS&Y Rising Stem BB Globe Valve EDVC globe valves are offered in straight pattern, bolted bonnet and welded bonnet design in a wide range of carbon, stainless steel, duplex stainless steel, alloy and other special materials. the globe valves are manufactured according to BS 1873 and API 623 Design. API Globe Valve Design Features Design standard as per: BS1873,GB/T 12235. Generally, lift is just 1/4 of the valve seat port, ensuring a short Opening/closing time. Only one

Oblique Type Y Type Cast Steel Globe Valves API 603 300LB 2' Globe valves are linear motion closing-down valves used to start, stop or regulate the flow using a closure member referred as a disc. The globe valve disk can completely close the flow path or can be removed entirely. The seat opening changes proportionately with the travel of the disc which is ideal for duties involving flow regulation. Globe valves are most suitable and widely used for throttling and controlling