API 600 Gate Valve

300LB Flexible Wedge Alloy Steel Gate Valve Gate valves are available with different disks or wedges. Ranging of the Gate valves is usually made by the type of wedge used. The most common were: Solid wedge is the most commonly used disk by its simplicity and strength. A valve with this type of wedge can be installed in each position and it is suitable for almost all liquids. The solid wedge is a single-piece solid construction, and is practically for turbulent flow. Flexible

GOST Standard Rising Stem CN7M Gate Valve EDVC Gost gate valve is designed and manufacture according to the Russian GOST standard. Gate valve is the most popular valve for cut off, can be applied in water, steam, oil and gas, petrol chemical, acid, etc. Carbon steel material: 25Л ---temperature −40°С до +425°С Low temperature carbon steel: 20ГЛ---temperature −60°С до +425°С Stainless steel: 12Х18Н9ТЛ,12Х18Н12МЗТЛ---temperature −60°С до +525°С Model by GOST: 30с41нж ,30с541нж

DIN PN 16 Resilient Seat Non Rising Stem Gate Valve Non-rising stem gate valve is mainlyused in the pipelineto cutoff and widely used a newtype of vave.This type of valve should be installedhorizontally in the pipeline.The opening and closing part of the gate vave is the gate.The direction of movement of the gate is perpendicular tothe direction of the fuid.The gate valve can only be fulyopen and ful closed! The American standard gate vave is mainly used to connector cutoff

Big Size Resilient Seated Gate Valves Flanged BS EN1563 Big size resilient seated gate valve is large sized resilient seated gate valve from 14″ to 40″ (DN350~DN1000mm). Its on-off disc is the flexible wedge gate, whose moving direction is perpendicular with flow. Resilient seated gate valve can be only full open or full close. Water gate valves are widely used in series of industries, especially in water supply projects, public works, water treatment plan, fire fighting, etc

Gear Operted 2500LB Non Rising Stem Pressure Seal Gate Valve Product Description: Size: from 2″ to 20″ Pressure: 1500 – 2500LB Material: WCB, WC1, WC6, and WC9 Design and production standard: API 600, API6D and ASME B16.34 Distance between flanges: API 6D, ASME B16.10 Connected in accordance with standard: ANSI B16.25 Test standard: API598, API 600 Actuation: can operate with lever, reducer and electric actuator. Medium: The valve is suitable for several media including water

Bolted Bonnet Parallel Slide Gate Valve This type of on-off valve is an alternative to the traditional wedge type gate valves. The disc is in two halves, spring loaded, that seat on parallel seat rings. The disc “slides” in contact with the seats, hence the name. The advantages of this product versus the traditional wedge type product are: the disc never blocks in closed position (phenomenon that may occur with a wedge type that is closed with the line in temperature and

DIN F5 PN 16 Cast Steel Gate Valve Product Range: Body Material: Carbon Steel, Stainless Steel, Alloy Steel. Normal Diameter: 2 - 60 Inch (DN50-DN1500). End Connection: BW, Flanged. Pressure Range: Class 150 - 2500 LB (PN16-PN420). Operation: Lever, Gearbox, Electric, Pneumatic, Electro Hydraulic Actuator, Gas Over Oil Actuator. Working Temperature: -46℃-+200℃. DIN GATE VALVE: DESIGN AND MANUFACTURE: EN 1984. NOMINAL DIAMETER: DN50-DN1200. DESIGN STANDARD: PN10-PN100.

PRESSURE SEAL NON RISING STEM GATE VALVE 600LB ANSI B16.5 Gate valves serve as efficient on-off valves with flow in either direction. In such a design, a wedge slides cross a general passageway in order to control fluid flow (like a sliding gate - hence, the name). One of the most significant characteristics of this type of valves is its straight-through, unobstructed passageway when set in the “full open" position. This is made possible by the wedge lifting entirely out of

150LB Bolted Bonnet OS&Y Gate Valve OS&Y gate valves are specifically design to industry standards for straight thru, bi-directional flow which results in low flow loss and low pressure drop. They are designed for applications where excellent flow conditions and tight shut-off are necessary. Our gate valves proudly service the oil/gas refining, pulp and paper, power generation and chemical/petrochemical industries worldwide. We offer both Cast API 600 and Forged API 602 Gate

API600 900LB Solid Wedge Bolted Bonnet Gate valve The gate valve is formed between the two sealing faces of the single-disc or double-discs wedge gate valve and perpendicular to the pipeline axis. It is mainly used for switching on or off the medium within pipelines, that is, it is used in a full open or close manner. The gate valve is widely applicable for oil industry, chemical industry, and power station. Product Range: Body material: carbon steel, stainless steel, alloy

API607 Parallel Slide Gate Valve Solid Wedge Cast Steel Class 300 Rf Flanged Gate valves are available with different disks or wedges. Ranging of the Gate valves is usually made by the type of wedge used. The most common were: Solid wedge is the most commonly used disk by its simplicity and strength. A valve with this type of wedge can be installed in each position and it is suitable for almost all liquids. The solid wedge is a single-piece solid construction, and is

Double Disk Pressure Seal Rising Stem Gate Valve 600lb A gate valve with a double-disc design provides extra safe and security. EDVC DBB gate valve is designed with double discs for double shut off, plus a drainage for bleeding. Gate valves serve as efficient on-off valves with flow in either direction. In such a design, a wedge slides cross a general passageway in order to control fluid flow (like a sliding gate - hence, the name). One of the most significant characteristics

API 623 BELLOW-SEAL GLOBE VALVES Product Range: Pressure: ASME CLASSES 150 & 300 Body Material: CAST CARBON, STAINLESS STEEL OR ALLOY STEE Connection: BOLTED BONNET, DESIGN FEATURES: •Standard trim is API trim 12 with 316Ti bellows. •Each valve is shell, seat and backseat pressure tested per industry standard API 598. •Other Bellows material options are available. Bellows are hydro-formed rather than welded. •Each valve has a unique certification number that is traceable to

Through conduit slab Disc Gate Valve Slab gate valve is a through conduit valve type. The design is ideal to minimize pressure drops and to prevent accumulation of external materials such as slurries into the valve cavity. This valve type is widely used for oil, gas,chemiical transportation, which is typically suitable for wet, sour,liquid or gaseous hydrocarbon services, and complies to the API6D standard. There are two structure type: diversion holes and non-diversion hole.

DIN Cast Iron F4 Gate Valve Din Cast Iron F4 Gate valves are reliable, offering a tight shut-off and low pressure drop. The design covers a wide range of requirements to meet any customer need from general to severe service conditions. Gate valves are in compliance with the latest edition of API600 and ASME B16.34 Applicable Standards: - Rating: Class 150 - 2500 LB (PN16-PN420). - Temperature Range: 46℃-+200℃ - Size Range: 2 - 60 Inch (DN50-DN1500) - End Connection: BW,

1500LB RTJ Presure Seal Gate Valve EDVC Pressure seal Gate Valve are manufactured in accordance with API 600, ASME B16.34 specification and tested to API 598, and this series valves are of API 591 certified, and APl624, IS015848, TA Luft Certified. To ensure casting integrity. Product Feature: Flanged Ends I Butt Welding Ends Pressure Seal Bonnet OS& Y End to end dimensions and wall thickness conform to ANSI and API specification; Anti blow-out stem design; Ha「d facing seat

600LB Duplex Steel Underground Through Condit Gate Valve Design Features Design standard as per: API 6D,ASME B16.34,GB/T 19672 The valve disc and valve seat seal are repeatedly treated by special processes, and protected by multiple seals, and featured with anti-corrosion, penetration-proof, anti-abrasion and long service life; Valve seat is designed with hard-soft double seal, having reliable tightness; With a full bore design, both the coefficient of flow resistance and the

PN10 PN16 API Cast Steel Gate Valve High Pressure DESIGN FEATURES: •Standard trim is API trim 12 with 316Ti bellows. •Other Bellows material options are available. Bellows are hydro-formed rather than welded. •Each valve has a unique certification number that is traceable to the valve certification sheet which includes MTR data, pressure test, inspection result and certificate of conformance. •Other available options as follows: • Alternate valve materials such as chrome and

DN15mm~DN900mm API 600 Gate Valve Flanged Connection The double spring loaded disc has the tendency to trap working fluid in the body cavity when the valve is closed. This is avoided, when unidirectional functioning is allowed, by applying an equalizing hole on the upstream part of the disc. Design codes and overall configuration, including stem-to-disc connection are the same than the wedge type gate valves. Materials range from carbon steel to low alloy steel, to austenitic

Manual API 600 Cast Steel Gate Valve Butt Weld Connection API 600 Cast Steel Gate Valve is used widely in metallurgy,gas,petrochemical industry,power network,and environmental protection. Design Specifications Design Standard: API 600 or API 603 Size Range: 2” to 56” * Pressure Range: Class 150 thru 2500 * End Connections: Flanged RF & RTJ, Butt Weld * Inspection and Testing: API 598 Leakage Test, API 624 Fugitive Emissions Test Flanged End Dimensions: ASME B16.5 (≤24”), ASME