Lithium Battery Research

Lithium Battery Research TernaryLithium Nickel Manganese Cobalt Oxide Cathode Material NMC Powder The product has strong applicability, good versatility, can be widely used in all kinds of cylindrical battery , Prismatic cell, polymer battery products. Packing:25±0.01Kg/Pack Storage: recommend Temperature≤30 ℃ , RT≤60% Name Lithium Nickel Manganese Cobalt Oxide Appearance Black Powder Item standard Value Tap Density ( g/cm3 ) 1.2±0.2 1.20 SSA(m2/g) 0.90±0.25 0.85 H2O (ppm)

Gelon Lithium Ion Battery Anode Material Powder Lab Research Lithium Titanium Oxide LTO Anode Temperature: 25° C Coin Cell testing 0.2C charging and discharging Voltage: 1.55V Capacity: 160~165 mAh/g Product Li4Ti5O12 Type GN-TLB Application High rate discharge , and good stability D10(um) 0.2 D 5o (um) 1 . 0 D90(um) 99.7 % Appearance White Powder > No Agglomeration , No Sundries Storage/Delivery Avoid moist Use Time One Year We could supply one stop solution ( turn key

Manual Winding Machine Introduction 1. Manual winding machine is a simple manual winding machine independently designed and manufactured by us, which is specially used for the winding of aluminum foil packaging batteries/cylindrical batteries and supercapacitors. The deflection of the rolling needle is small; the up and down, left and right, front and rear positions of the material guide plate are adjustable; the foot switch controls the forward and reverse rotation. It is

Lab Heat Coating Machine Overview of equipment This product is adjusted with a micrometer to achieve the thickness of the film to be applied. This machine is equipped with a precise adjustable film applicator, and the moving pole pushes it to move at a constant speed, so as to achieve the uniformity of the slurry coating on the substrate. This machine is especially suitable for making battery electrode, which can ensure the uniform density of cathode/anode electrode material

Lab Heat Coating Machine Overview of equipment This product is adjusted with a micrometer to achieve the thickness of the film to be applied. This machine is equipped with a precise adjustable film applicator, and the moving pole pushes it to move at a constant speed, so as to achieve the uniformity of the slurry coating on the substrate. This machine is especially suitable for making battery electrode, which can ensure the uniform density of cathode/anode electrode material

LCO Lithium lon Battery Research Raw Material Powder Lithium Cobalt Oxide Material Licoo2 Item Unit Standard Inspection way Appearance Ash black powder D10 μm 1 . 1±0.5 MASTERSIZER2000 D50 μm ＜ 10 D90 μm ≤40.000 Moisture ppm ≤1000 Loss on drying SSA g/cm³ 0.8±0.2 FZS4-4 Tap density instrument testing C content % 1 . 5±0.2 1st capacity mAh/g ≥ 155 Half cells 0.5C char-discharging Voltage:2.5V--3.7V 1 st efficiency % ≥ 95 COMPANY PROFILE Full Automatic Car Battery Production

LCO Lithium lon Battery Research Raw Material Powder Lithium Cobalt Oxide Material Licoo2 Item Unit Standard Typical Chemical Compositions Li % 7.00±0.40 6.99 Co % 60.00±1.00 59.62 Fe ppm ≤ 1 00 30 Ni ppm ≤ 1 00 15 Na ppm ≤ 1 00 27 Cu ppm ≤ 50 2 D10 μm ≥7.000 10.8 D50 μm 1 9.000 ± 2.000 19.5 D90 μm ≤40.000 32.5 Dmax μm ≤55.00 45.4 XRD Lattice Type / / / Ph / 9.50-1 1 . 00 9.8 Moisture ppm ≤500 280 BET Surface Area m2/g 0.15±0.10 0.12 Tap Density g/cm3 ≥2.30 2.56 1 st

NFM Cathode Powder Material for Li-ion Batteries NFM is the new material for cathode electrode making while producing lithium ion battery. Why is it "ternary lithium" instead of "ternary sodium"? According to physical common sense, we know that only the positive electrode material does not form a complete battery structure. A battery with discharge capability = positive electrode + negative electrode + electrolyte (containing electrolyte). The "lithium" of ternary l

Battery Lab High-Speed Vacuum Mixer Lithium Battery Machine Anode Slurry Making Lithium Battery Research GN-VM7 is designed to produce coating slurry by mixing small batch of chemical and compound (500 ml Max) under vacuum to remove gas bubble and protect sample from oxidation. It has build-in pump which can vacuum the mixing container to 0.08Mpa (600 torr) and the step- less mixing speed variates from 0 to 320rpm. The vibration plate is located at the bottom to remove gas

Laboratory Coating machine (The picture is just for reference) 1. Overview of equipment characteristics This product is a small coating machine with automatic drying function. The precision film maker is pushed at a uniform speed to achieve a smooth and uniform coating effect. The equipment uses vacuum suction to fix the substrate, so that the substrate will not be wrinkled during the coating process, so that the coating is smoother. After coating, the sample can be heated

Laboratory Coating machine (The picture is just for reference) 1. Overview of equipment characteristics This product is a small coating machine with automatic drying function. The precision film maker is pushed at a uniform speed to achieve a smooth and uniform coating effect. The equipment uses vacuum suction to fix the substrate, so that the substrate will not be wrinkled during the coating process, so that the coating is smoother. After coating, the sample can be heated

Lab Cylinder Cell Grooving Machine Cylindrical battery rolling groove machine is an equipment that can be applied to cylindrical lithium ion battery rolling groove process. The replacement of groove mold can be applied to the production of cylindrical batteries of various specifications. Replaceable hob, high rolling groove accuracy, good dimensional stability; 18650/21700/26650/32650 molds are optional (customized according to customer requirements), changing molds to