Bently Nevada

In-stock 4454-132 legacy temperature sensor with verification and machinery-monitoring support.

In-stock 330980-71-00 NSv Proximitor sensor with verification and machinery-monitoring support.

In-stock 16710-14 cable component with model verification, fast dispatch and industrial spare-parts support.

Bently Nevada 330103-00-11-10-02-00 3300 XL 8 mm Proximity Probe for Shaft Vibration Monitoring The Bently Nevada 330103-00-11-10-02-00 is a 3300 XL 8 mm Proximity Probe designed for shaft vibration and position measurement. It is part of the 3300 XL Proximity Transducer System and uses eddy current technology for machinery protection and monitoring applications. Technical Specifications Probe Type: 3300 XL 8 mm Probe Unthreaded Length: 00 (0 mm) Overall Case Length: 11 (110

Bently Nevada 990-05-70-02-00 Vibration Transmitter (0-5 mils Range) for 7m 3300 NSv Proximity System The Bently Nevada 990-05-70-02-00 is a loop-powered vibration transmitter that converts mechanical shaft vibration into a proportional 4 to 20 mA industry-standard signal for machinery control systems. It provides an integrated, rack-free monitoring solution primarily intended for centrifugal air compressors, small pumps, motors, or fans. 0-5 mils Range (05): Provides a 0-5

3500/46M 176449-06 4-Channel Hydro Monitor Module for Hydropower Turbine Vibration and Air Gap Protection Product Overview The Bently Nevada 3500/46M 176449-06 is a four-channel hydro monitor module for turbine protection. It processes signals from proximity, seismic, dynamic pressure, and air gap sensors. 4 Channels: Monitors radial vibration, thrust, and air gap Shear-Pin Detection: Combines shaft gap with NX amplitude to catch failures Multimode Alarms: Stores 8 mode

330101-00-75-10-02-00 Bently Nevada High-Length Proximity Probe for Deep-Housing Turbine Vibration Monitoring The Bently Nevada 330101-00-75-10-02-00 probe is used for sub-micron vibration measurement on turbines and compressors. Its 7.5-inch case design helps reduce cross-talk and avoid false alarms during monitoring. 7.5" Case Length: Penetrates deep housings directly, saving modification costs ClickLoc Connector: Self-locking and anti-loosening, preventing false trips

330103-00-20-10-02-00 Bently Nevada 3300 XL 8mm Probe for Turbine Shaft Vibration Monitoring Bently Nevada 330103-00-20-10-02-00 is a 3300 XL 8mm proximity probe with an M10×1 thread and 200mm case length. It measures shaft vibration and displacement on fluid-film bearing machinery. The extended 200mm casing allows the sensor to reach through thick machine outer shells to monitor internal components. Technical Specifications & Value Model: 3300 XL 8 mm (M10×1 thread, 200mm

330103-13-23-05-02-00 Bently Nevada 3300 XL 8 mm Proximity Probe for Thick-Walled Rotating Machinery Product Overview The Bently Nevada 330103-13-23-05-02-00 comes with a 230 mm long case, made for applications where the probe needs to reach through thicker machine walls. Used for non-contact vibration and axial displacement measurement on turbines, compressors, and other critical equipment. Technical Specifications Model: 3300 XL 8mm Probe (M10 × 1 thread, unarmored)

330104-00-04-05-02-00 Bently Nevada 3300 XL 8 mm Proximity Probe Core Specifications Product Series: Bently Nevada 3300 XL 8 mm Thread Type: M10 × 1 thread with stainless steel armor Unthreaded Length: 0 mm Overall Case Length: 40 mm Total Length: 0.5 meters (1.6 feet) Connector Type: Miniature coaxial ClickLoc connector (standard cable) Agency Approval: No hazardous area approvals (standard version) Key Applications Condition Monitoring: Real-time monitoring of shaft

330104-04-10-05-01-CN Bently Nevada 3300 XL 8 mm Proximity Probe Product Overview The Bently Nevada 330104-04-10-05-01-CN is a high-precision 8mm proximity probe designed for non-contact measurement of shaft vibration and displacement in rotating machinery. Key Specifications Model: 330104-04-10-05-01-CN Product: 3300 XL 8mm Proximity Probe Thread: M10 × 1 metric thread Dimensions: 40mm unthreaded length / 100mm overall case length Cable Length: 0.5 metres (1.6 feet)

330104-00-04-50-11-00 Bently Nevada 3300 XL 8 mm Proximity Probe Product Overview Bently Nevada 330104-00-04-50-11-00 is a 3300 XL 8 mm standard mount proximity probe with M10 x 1 metric thread and integrated stainless steel armor . It works as a non-contact eddy current displacement sensor , built to API 670 requirements. This version comes with a 40 mm fully threaded case , 5.0 m integral cable , and a ClickLoc coaxial connector with factory protector. The key detail is the

330101-30-63-15-02-CN Bently Nevada 3300 XL 8 mm Proximity Probe Product Overview Brand: Bently Nevada Product Series: 3300 XL 8 mm Proximity Transducer System Part Number: 330101-30-63-15-02-CN Product Type: Non-contact Eddy Current Proximity Probe Standard Compliance: Fully complies with API 670 Standard Model Configuration Details 330101 (Base Model): 3300 XL 8 mm Probe, 3/8-24 UNF thread, without stainless steel armor 30 (Unthreaded Length): 3.0 inches of unthreaded case

330103-00-08-10-02-00 Bently Nevada 3300 XL 8 mm Proximity Probe Probe Diameter: 8 mm Thread Type: M10 x 1 threads Unthreaded Length: 0 mm (fully threaded body) Overall Case Length: 80 mm Total Cable Length: 1.0 meter (3.3 feet) Connector Type: Gold-plated ClickLoc miniature coaxial male connector Probe case uses AISI 303/304 stainless steel , with a PPS tip and 8 mm wrench flats . It operates from -52°C to +177°C (-62°F to +350°F) . Mechanical strength is rated at 330 N (75

Bently Nevada 330101-00-20-10-02-05 is a 3300 XL 8 mm proximity probe for non-contact shaft vibration and position measurement. It has a 1 m lead, ClickLoc connector and CSA, ATEX and IECEx approvals. Match the extension cable and Proximitor Sensor before ordering.

990-05-70-02-05 4-20mA Vibration Transmitter with ATEX for Hazardous Areas The Bently Nevada 990-05-70-02-05 is a two-wire, loop-powered vibration transmitter designed for continuous shaft vibration monitoring. It combines the Proximitor® sensor and transmitter in one compact housing and is intended for use with the 3300 NSv Proximity Transducer System. This version features a 0-5 mils full-scale range and a 7.0 m system length, making it suitable for small pumps, compressors

330500-00-00 Bently Nevada Velomitor Piezo-Velocity Sensor for Casing Vibration Monitoring The Bently Nevada 330500-00-00 Velomitor sensor is mainly used for absolute casing vibration monitoring. It has a solid-state structure, so there are no moving parts inside. For many industrial sites, it is installed on bearing housings of rotating equipment in non-hazardous areas. Sensitivity: 3.94 mV/mm/s (100 mV/in/s) ±5%The sensor output follows velocity changes from the machine,

22811-01-06-10-02 Bently Nevada 8mm Proximity Probe for Turbine Shaft Monitoring Bently Nevada 22811-01-06-10-02 is a 7200 series 8mm proximity probe for turbine shaft vibration and displacement monitoring. It features a rugged PPS tip to prevent sensor failure in high-temperature, oily bearing environments, serving as a direct replacement for legacy asset protection. Technical Parameters Configuration: 8mm body (M10×1 thread), 10mm unthreaded, 60mm case length, 1.0m cable,

330505-01-02-02 Bently Nevada Low Frequency Velocity Sensor for Hydro-Turbine Monitoring The Bently Nevada 330505-01-02-02 is a vertical velocity sensor for low-speed hydro-turbines. It measures low-frequency vibration down to 0.5 Hz and works with 3500/46M monitors for vibration monitoring in power plants. Key Features Vertical Mounting (0° ± 10°): Prevents cross-axis errors in hydro-generator shafts 0.5 Hz to 1,000 Hz Frequency Range: Detects low-frequency fluid slips and

330103-01-06-05-02-00 Bently Nevada 3300 XL 8 mm Proximity Probe Bently Nevada 330103-01-06-05-02-00 is an industrial-grade 3300 XL 8 mm Proximity Probe featuring an M10 x 1 metric thread and an unarmored configuration. It is engineered for high-precision, non-contact displacement and vibration measurements on critical rotating machinery. Technical Specifications Probe Diameter: 8 mm Thread Type: M10 x 1 metric thread (Unarmored) Case Dimensions: 10 mm unthreaded length / 60