Bently Nevada

330104-00-04-50-11-00 Bently Nevada 3300 XL 8 mm Proximity Probe Product Overview Bently Nevada 330104-00-04-50-11-00 is a 3300 XL 8 mm standard mount proximity probe with M10 x 1 metric thread and integrated stainless steel armor . It works as a non-contact eddy current displacement sensor , built to API 670 requirements. This version comes with a 40 mm fully threaded case , 5.0 m integral cable , and a ClickLoc coaxial connector with factory protector. The key detail is the

330101-30-63-15-02-CN Bently Nevada 3300 XL 8 mm Proximity Probe Product Overview Brand: Bently Nevada Product Series: 3300 XL 8 mm Proximity Transducer System Part Number: 330101-30-63-15-02-CN Product Type: Non-contact Eddy Current Proximity Probe Standard Compliance: Fully complies with API 670 Standard Model Configuration Details 330101 (Base Model): 3300 XL 8 mm Probe, 3/8-24 UNF thread, without stainless steel armor 30 (Unthreaded Length): 3.0 inches of unthreaded case

330103-00-08-10-02-00 Bently Nevada 3300 XL 8 mm Proximity Probe Probe Diameter: 8 mm Thread Type: M10 x 1 threads Unthreaded Length: 0 mm (fully threaded body) Overall Case Length: 80 mm Total Cable Length: 1.0 meter (3.3 feet) Connector Type: Gold-plated ClickLoc miniature coaxial male connector Probe case uses AISI 303/304 stainless steel , with a PPS tip and 8 mm wrench flats . It operates from -52°C to +177°C (-62°F to +350°F) . Mechanical strength is rated at 330 N (75

Bently Nevada 330101-00-20-10-02-05 is a 3300 XL 8 mm proximity probe for non-contact shaft vibration and position measurement. It has a 1 m lead, ClickLoc connector and CSA, ATEX and IECEx approvals. Match the extension cable and Proximitor Sensor before ordering.

990-05-70-02-05 4-20mA Vibration Transmitter with ATEX for Hazardous Areas The Bently Nevada 990-05-70-02-05 is a two-wire, loop-powered vibration transmitter designed for continuous shaft vibration monitoring. It combines the Proximitor® sensor and transmitter in one compact housing and is intended for use with the 3300 NSv Proximity Transducer System. This version features a 0-5 mils full-scale range and a 7.0 m system length, making it suitable for small pumps, compressors

330500-00-00 Bently Nevada Velomitor Piezo-Velocity Sensor for Casing Vibration Monitoring The Bently Nevada 330500-00-00 Velomitor sensor is mainly used for absolute casing vibration monitoring. It has a solid-state structure, so there are no moving parts inside. For many industrial sites, it is installed on bearing housings of rotating equipment in non-hazardous areas. Sensitivity: 3.94 mV/mm/s (100 mV/in/s) ±5%The sensor output follows velocity changes from the machine,

22811-01-06-10-02 Bently Nevada 8mm Proximity Probe for Turbine Shaft Monitoring Bently Nevada 22811-01-06-10-02 is a 7200 series 8mm proximity probe for turbine shaft vibration and displacement monitoring. It features a rugged PPS tip to prevent sensor failure in high-temperature, oily bearing environments, serving as a direct replacement for legacy asset protection. Technical Parameters Configuration: 8mm body (M10×1 thread), 10mm unthreaded, 60mm case length, 1.0m cable,

330505-01-02-02 Bently Nevada Low Frequency Velocity Sensor for Hydro-Turbine Monitoring The Bently Nevada 330505-01-02-02 is a vertical velocity sensor for low-speed hydro-turbines. It measures low-frequency vibration down to 0.5 Hz and works with 3500/46M monitors for vibration monitoring in power plants. Key Features Vertical Mounting (0° ± 10°): Prevents cross-axis errors in hydro-generator shafts 0.5 Hz to 1,000 Hz Frequency Range: Detects low-frequency fluid slips and

330103-01-06-05-02-00 Bently Nevada 3300 XL 8 mm Proximity Probe Bently Nevada 330103-01-06-05-02-00 is an industrial-grade 3300 XL 8 mm Proximity Probe featuring an M10 x 1 metric thread and an unarmored configuration. It is engineered for high-precision, non-contact displacement and vibration measurements on critical rotating machinery. Technical Specifications Probe Diameter: 8 mm Thread Type: M10 x 1 metric thread (Unarmored) Case Dimensions: 10 mm unthreaded length / 60

HI-POTTED 00270143 PX4995 Bently Nevada Control Transformer Product Overview Device Name: Bently Nevada Control Transformer Model Number: HI-POTTED 00270143 / PX4995 Core Function: Converts and isolates input voltage into stable, low-voltage power for Bently Nevada condition monitoring systems, control circuits, and machinery sensors Hi-Potted Technology: Basically the coils inside are fully resin-sealed, not just coated. The whole 00270143 PX4995 ends up as a solid

330104-10-18-10-01-00 Bently Nevada 3300 XL 8 mm Proximity Probe 330104 : Base Model — Specifies a 3300 XL 8 mm probe with an M10 x 1 metric thread and integrated stainless steel flexible armor . 10 : Unthreaded Length — Represents an unthreaded case length of 100 mm (approx. 4 inches). 18 : Overall Case Length — Represents an overall case length of 180 mm (approx. 7 inches). 10 : Total Length — Specifies a 1.0-metre (approx. 3.3 feet) total cable length. 01 : Connector and

330173-00-05-10-12-00 Bently Nevada 3300 5 mm Proximity Probe Option Code Breakdown 330173 : 3300 5 mm Proximity Probe, M8 x 1 thread, no armor 00 : 0.0 mm unthreaded length 05 : 50 mm total case length 10 : 1.0 meter (3.3 feet) system length 12 : Miniature coaxial ClickLoc connector with FluidLoc cable 00 : No agency approvals Key Technical Specifications Application : Measures radial/axial position and vibration Range & Scale : 0.25 to 2.3 mm linear range with a 7.87 V/mm

330103-03-12-05-02-00 Bently Nevada 3300 XL 8 mm Proximity Probe High-Precision Monitoring: Micron-level accuracy is the main point here, used for non-contact shaft vibration, axial position, and Keyphasor signals on rotating machinery. In practice, it’s the kind of probe used where stability matters more than anything else. Extreme Environment Durability: Works in harsh setups like oil & gas plants. Corrosion, moisture, temperature swings—basically all the usual industrial

330708-00-10-90-02-00 Bently Nevada 3300 XL 11 mm Proximity Probe Product Name Bently Nevada 3300 XL 11 mm Proximity Probe Thread 5/8-18 UNF Construction Stainless steel armor Unthreaded Length 0-inch Case Length 1.0-inch Cable Length 9.0-meter integral cable Connector Miniature coaxial ClickLoc Agency Approvals None required Technical Specifications Linear Range 4.0 mm (160 mils) Scale Factor 3.94 V/mm (100 mV/mil) Frequency Response 0 to 8 kHz Key Feature Gold-plated

In-stock 330851-02-000-070-90-00-05 25 mm proximity probe with verification and machinery-monitoring support.

In-stock 330910-10-22-10-01-CN probe component with model verification, fast dispatch and industrial spare-parts support.

990-05-XX-03-CN 104M1359-01 2-Wire Vibration Transmitter with 4-20mA Output for Compressor and Pump Protection Product Overview The Bently Nevada 990-05-XX-03-CN is a 2-wire vibration transmitter specifically designed for compressors, pumps, and fans. It transmits a direct 4-20 mA signal to PLC/DCS systems without requiring additional monitors, ensuring reliable machinery protection in rugged industrial environments. Key Features 0-5 mils p-p: Detects micro-vibrations early

330101-00-18-10-02-00 Bently Nevada 8mm Proximity Probe for Turbomachinery Asset Protection Product Overview The Bently Nevada 330101-00-18-10-02-00 is part of the 3300 XL 8mm proximity probe range and meets API 670 requirements. Common applications include non-contact shaft vibration and displacement monitoring on rotating equipment where machine condition needs to be tracked. Specifications Thread & Case: 3/8-24 UNF, 1.8" case length, non-armored Cable & Connector: 1.0

330104-00-08-10-01-05 Bently Nevada 3300 XL 8 mm Proximity Probe Description The 330104-00-08-10-01-05 is a 3300 XL 8mm non-contact proximity probe mainly used for vibration and displacement measurement on rotating equipment. It is commonly installed on machines where stable monitoring is needed, including turbines, compressors, and other critical machinery. The armored cable design gives extra protection during operation, especially in industrial sites with more demanding

330195-02-12-05-CN Bently Nevada 3300 XL 8 mm Extended Temperature Range (ETR) Reverse Mount Probe Product Overview The Bently Nevada 330195-02-12-05-CN is an 8mm Reverse Mount Proximity Probe with Extended Temperature Range (ETR) capability, designed for high-precision shaft vibration and displacement monitoring in turbines and compressors. Technical Specifications 330195: 8mm Reverse Mount design with Viton® pressure seal 02: 3/8-24 UNF thread configuration 12: Extended