High Voltage Silicone Thermal Insulation Sheet 1.0W/mk 0.15-0.5mm for CPU GPU Gap Filling
The TIS®100-03 Series is a thermally conductive and electrically insulating product that achieves insulating and thermally conductive effects by incorporating insulating silicone-based materials into thermally conductive formulations. Reinforced with fiberglass for excellent tear and puncture resistance, this non-toxic, environmentally friendly, and flame-retardant material is primarily used to isolate power supplies from heat sinks and similar applications.
- Surface is relatively soft
- Good heat conductivity
- Good dielectric strength
- Low thermal resistance with high voltage isolation
- Resistant to tears and punctures
- Power conversion equipment
- Power semiconductors: To packages, MOSFETs & IGBTs
- Audio and Video components
- Automotive control units
- Motor controllers
- General high pressure interface
| Property | Value | Test Method |
|---|---|---|
| Color | Yellow | Visual |
| Construction & Composition | Ceramic filled silicone elastomer / Fiberglass | - |
| Thickness range (inch/mm) | 0.008/0.20 | 0.009/0.23 | 0.010/0.25 | 0.012/0.30 | ASTM D374 |
| Hardness (Shore A) | 80 | ASTM D2240 |
| Density (g/cm³) | 1.8 | ASTM D792 |
| Tensile Strength (Mpa) | 25 | ASTM D412 |
| Recommended Operating Temperature (℃) | -40~200 | - |
| Breakdown voltage (V) | ≥3500 | ≥4000 | ≥4000 | ≥6000 | ASTM D149 |
| Dielectric Constant@1MHz | 3.5 | ASTM D150 |
| Volume Resistivity (Ohm*cm) | ＞1.0x10¹³ | ASTM D257 |
| Thermal Conductivity | 1.0W/mk | ASTM D5470 |
| Thermal impedance(℃*in²/W)@25psi | 1.0 | 1.36 | 1.6 | 2.1 | ASTM D5470 |
| Flame Rating | V-0 | UL94 (E331100) |
Standard Thickness: 0.008"(0.20 mm), 0.009"(0.23 mm), 0.010"(0.25 mm), 0.012"(0.30mm)
Standard Size: 12"×160" (304 mmX48.7 m)
The TIS® series is available in custom shapes and various forms.
For other thicknesses or more information, please contact us.
Ziitek is a high-tech enterprise dedicated to the R&D, manufacture, and sales of thermal interface materials (TIMs). With rich experience in this field, we provide the latest, most effective, and comprehensive thermal management solutions. Our advanced production equipment, full testing capabilities, and fully automatic coating production lines support the manufacturing of high-performance thermal silicone pads, thermal graphite sheets/films, thermal double-sided tape, thermal insulation pads, thermal ceramic pads, phase change materials, thermal grease, and more. All products are compliant with UL94 V-0, SGS, and ROHS standards.
A: We are manufacturer in China.
A: Generally it is 3-7 work days if the goods are in stock, or 7-10 work days if the goods are not in stock, depending on quantity.
A: Yes, we could offer samples free of charge.
A: TIM (Thermal Interface Material) refers to a class of materials used to fill microscopic air gaps between a heat source and a heat sink. TIMs help reduce interface thermal resistance and improve heat transfer from the heat source to the cooling structure. Common TIMs include thermal pads, thermal gels, thermal greases, phase change materials (PCMs), and liquid metal.
A: Thermal conductivity indicates a material's ability to conduct heat and is typically measured in W/m*K. Under the same testing conditions, a higher thermal conductivity generally indicates better heat-conduction capability.
A: Thermal resistance indicates the resistance to heat flow through a material or interface and is typically expressed in K/W or °C/W. Lower thermal resistance generally means that heat can pass through the material more efficiently.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.