High Tensile Tool Steel Sheet , Die Tool Steel Annealed Heated SAE4140 / SCM440
High Tensile Hot Rolled SAE4140 / SCM440 / 1.7225 Mold Steel Plate
SAE4140 mold steel plate is an alloy structural steel, it has good machinability, processing deformation is small, 4140 alloy structural steel fatigue resistance is quite good, is a medium hardenability steel.
After heat treatment, it has good strength and good mechanical properties, good workmanship, high yield.
The maximum temperature is 427 degrees Celsius.
Equivalent grades
| GB(China) | DIN(German) | AISI(USA) | JIS(Japan) |
| 42CrMo | 1.7225 | SAE4140 | SCM440 |
Chemical Composition(%)
| C | Si | Mn | Cr | P | S | Mo |
| 0.38-0.45 | 0.17-0.37 | 0.50-0.80 | 0.90-1.20 | ≤0.035 | ≤0.035 | 0.15-0.25 |
Feature
1. High strength
2. High hardenability
3. Good toughness,
4. Small deformation during quenching,
5. High creep strength and long-lasting strength at high temperatures.
Applications
Used in the manufacture of high strength, large cross-section forgings such as supercharger transmission gear,rear axle, hummar shank etc.
Recommend heat treatment
| Quenching | Tempering | ||||
| Heating temperature/℃ | Cooling way | Hardness (HRC) | Tempering temperature /ºC |
Cooling way | Hardness (HRC) |
| 850-880 | Oil Cooling | ≥53 | 450-650 | Air cooling | 25-40 |
Available size(mm)
| Flat Bar Size(mm) | Round bar Size(mm) | |||
| Thickness | Width | Length | Diameter | Length |
| 10-200 | 155-2200 | 2000-6000 | 20-200 | 3000-6000 |
Mechanical Properties:
Tensile strength:σb (MPa): ≥1080(110)
Yield strength:σs (MPa): ≥930(95)
Elongation:δ5 (%): ≥12
Section shrinkage:ψ (%): ≥45
Impact work:Akv (J): ≥63
Impact toughness value:αkv (J/cm²): ≥78(8)
Standards and Practices:
Bars & Forgings – To comply with all requirements of the latest edition of the Standards of the Society of Automotive Engineers for SAE 4140 steel.
Plates – To comply with all requirements of the latest edition of the Steel Products Manual of the Iron and Steel Society of AIME, for 4140 alloy steel plate.
Our Advantages
- We are a stockist who have a lot of stocks all the time, we can arrange fast shipment
- All products 100% pass UT test before the shipment.
- The 3rd party inspection is accept.
- Low MOQ request
- TT, LC payment are both accepted
- High quality, you won’t have any quality problems
We are here waiting for a cooperation chance between us, contact us today then you will get one more chance to find a loyal Hot Rolled Alloy Steel supplier!
More photos for Mold Steel Plate
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.