DIN 1.2379 High Carbon Alloy Steel Rod Black Surface Hot Rolled Mill Certificated
DIN 1.2379 Black Surface Hot Rolled High Carbon Alloy Steel Round Bar Dia 15-80mm
Similar grades: DIN-1.2379, AISI-D2, JIS-SKD11, GB-Cr12Mo1V1
Chemical composition (%):
| C | Si | Mn | Cr | Mo | V | P | S |
| 1.40-1.60 | 0.30-0.50 | 0.30-0.50 | 11.0-13.0 | 0.70-1.20 | ≤0.8 | ≤0.030 | ≤0.030 |
Brief Introduction:
1.2379 / D2 die steel, high wear resistance and micro deformation, cold working die steel, wind hard tool steel, carbon content up to 1.5%, chromium content high, noisy 11.5%, heat treatment, hardness up to 60HRC. D2 steel can be used to make large cross section, complex shape, strong impact, high resistance to cold working die steel, such as silicon steel sheet die, cold cutting scissors, trimming die, etc..
1.2379 / D2 is a high carbon and high chromium alloy tool steel with high hardness and wear resistance after heat treatment, and has the characteristics of strong quenching and good dimensional stability.
Available size (mm):
| Flat Bar Size(mm) | Round bar Size(mm) | |||
| Thickness | Width | Length | Diameter | Length |
| 8-80 | 155-610 | 3000-6000 | 14-80 | 300-6000 |
Feature:
1, Good processing, heat treatment size stability.
2, Excellent machinability.
3, Excellent dimensional stability when hardened.
4, After hardening and tempering, the high surface hardness match well with the toughness of the body.
Recommend heat treatment:
| Quenching | Tempering | ||||
| Heating temperature/℃ | Cooling | Hardness/HRC | Heating temperature/℃ | Cooling | Hardness/HRC |
| 980-1040 | Oil or Air | 60-65 | 180-220 | Air | 60-64 |
| 1060-1100 | 60-65 | 510-540 | Air | 60-64 | |
Advantages:
1. High wear resistance;
2. High compressive strength;
3. Good dimensional stability;
4. Good machining performance;
5. Good toughness;
6. Excellent softening of temper.
Applications:
| For metal stamping die, drawing die, stainless steel sheet punching die, high hardness punching die, cutting knife mold, Roll Die, metal parts production, machinery manufacturing etc. | |
| 1, | Used for drawing die of refrigerator compressor rear cover, quenching hardness 56~58HRC. |
| 2, | In order to improve the service life of flat rolling material for D2 cold working die, the wear resistance and impact toughness of steel are greatly improved by adding rare earth, so as to improve the service life of flat rolling material of round die. |
| 3, | Because the content of V and Mo in D2 steel is higher than that of Cr12MoV steel, it has better comprehensive properties, and the traditional Cr12MoV steel will be replaced gradually. |
| 4, | Made of D2 steel rolling wheels, from Taiwan palette die, and Cr12MoV can improve the service life of steel compared to 5 ~6 times. |
Terms of payment:
30% deposit T/T and the balance by L/C at sight, or T/T.
Delivery condition:
For abundant stock, 15-20 days.For customized products, 30-50 days.
Product photos:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.