Junction Box Electrical Potting Liquid Silicone Gel Insulation Waterproof Igbt
Junction Box Circuit Board Softness Electrical Insulation Silicone Gel Waterproof 2 Part For PCB Load Cell Gel Silicone Igbt
Product description:
HN-6607AB is a very soft, low crosslinking density addition silicone rubber
Product Features:
1. Medium temperature curing, the curing time can be adjusted according to different temperatures;
2. It is low-viscosity silicone oil before curing and gel elastomer after curing.
|
Characteristics before curing
|
||
|
Component
|
Component A
|
Component B
|
|
Color
|
Transparent liquid
|
Transparent liquid
|
|
viscosity(cp s. 25℃)
|
800～2000
|
800～1800
|
|
Relative density(mpa•s)
|
1 ．0～1.12
|
0.98～1.02
|
|
The mixing ratio
|
A:B=1:1
|
|
|
Viscosity after mixing(cp s. 25℃)
|
800～1500
|
|
|
Operate Time (25℃)
|
2 h
|
|
|
Penetration (1/10mm)
|
200~ 400
|
|
|
Curing conditions (120℃)
|
20~30 mins
|
|
|
Cured properties
Hardness(Shore A, 24hr)
|
0～10
|
|
Instructions:
1. Before mixing, component A needs to be properly stirred manually or mechanically, and component B should be fully shaken in a sealed state before use.
2. When it needs to be attached to the application material, please confirm whether it can be attached before use, and then apply it. 3. Before construction, please weigh and mix according to the weight ratio of A:B = 1:1, and stir thoroughly before applying glue.
Package:
This product is 40KG per group;
Component A is 20KG (in barrels), and Component B is 20KG (in barrels)
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.