Two-Component Thermal Conductive AB Adhesive Waterproof Electronic Silicone Sealant Potting for Potting & Sealant

Name: Two-Component Thermal Conductive AB Adhesive Waterproof Electronic Silicone Sealant Potting for Potting & Sealant
Brand: Shenzhen Hanast New Material co.,LTD

Price Negotiable

Price: $5-$11.5

MOQ: 1kg

Delivery Time: 5-7days

Brand: Hanast

Product Description

What is it?

HN-8806 Two-component Addition Type Potting Compound

  HN-8808, two parts, low viscosity potting compound that cures at room temperature to soft pliable 
rubber. 
1. This potting silicone rubber has high moisture resistance and a wide temperature range of - 57°C to 250°C. 
2. Condensed liquid silicone rubber does not use polar compounds as raw materials, and does not release by-products during cross-linking, and can maintain better electrical properties 
under harsh conditions. 
3. Non-toxic, odorless, non-corrosive, non-swelling. 
4. It has adhesive force, has adhesion to metal aluminum, iron, acrylic, and PC plastic, and can improve waterproof sealing performance

Technical Parameter

№.	Iterms	Technique Request
1	Extreior	Transparent / White/ Grey Liquid
2	Viscosity mPa.S (before curing)	A:2000 B:50
3	Specific gravity (23C)	0．98
4	In commission time (h,25C)	1-2h
5	Entirely sulphuration time (min,25C)	8-12h
6	Hardness (JIS A)	25A
7	Volume resistivity (Ωcm)	≥1× 1014
8	Strength of breakdown voltage (kv/mm)	18-25
9	Dielectric constant (1MHZ)	2．5-3．0
10	Dielectric loss (1MHZ)	≤4×10-3
11	Thermal conductivity (w/m.k)	0.1-0.20

* Noted: 
Parameters can be adjusted as required. 
The data in this product description are non-standard values. 
Test first before using.

Product Usage

Widely used in sealing, electrical, potting, insulation, antifouling, waterproof, shockproof, coating, electronic appliances, and comprehensive household appliances.

Packing, Storage and Warranty

(1)Packaging: Component A: 5KG/10KG/25kg/drum Component B: 5KG/10KG/25kg/drum(2)Storage and transportation: This product is non-toxic and non-dangerous, handled as general chemicals, and stored in a cool (room temperature) dry place.
(3)Shelf life: 6 months, please re-inspect after the expiration date; if it meets the standard, it can still be used.

Product pictures

Method of Application

 According to the dosage, pour it into the mold after mixing according to A: B=10:1. Remove the surface bubbles and cure at room temperature (the proportion can be adjusted according to actual needs, the larger the proportion of component B, the faster the curing).