Product Overview

HN-8820 is a two-component, addition-cure RTV silicone potting compound with a 1:1 mixing ratio. It features low viscosity, excellent thermal conductivity (2.0 W/m·K), and high fluidity, making it ideal for protecting sensitive electronic components. It cures at room temperature or with heat, maintaining rubber elasticity across a wide temperature range from -40°C to 150°C. With superior insulation, waterproof, anti-aging, and flame-retardant properties, it ensures long-term reliability in demanding environments.

Product Features

• High Thermal Conductivity – 2.0 W/m·K

• Excellent Electrical Insulation – Volume resistivity ≥5.0×10¹⁴ Ω·cm

• Wide Operating Temperature – Stable from -40°C to 150°C

• V-0 Flame Retardant – Meets UL94 standard

• Waterproof, Moisture-Proof & Anti-Aging

• Low Viscosity & Easy Pouring

• 1:1 Mix Ratio – Easy to Use

• Room Temperature or Heat Curing Options

Technical Parameters

Typical Applications

HN-8820 is widely used for potting and protection in:

• Automotive HID Light Module Power Supplies

• Automotive Ignition System Modules

• Network Transformers

• Power Modules & Circuit Boards

• General Electronic Components

• Industrial Control Systems

• LED Drivers & Power Supplies

Handling & Curing Instructions

1. Weighing – Accurately weigh A and B in a 1:1 ratio. Stir each component thoroughly before mixing.

2. Mixing – Mix manually or mechanically until uniform in color. Avoid large batches to maintain flow.

3. Degassing – Vacuum degas to remove entrapped air.

4. Potting – Pour into clean, dry housings. Avoid contamination.

5. Curing – Cure at room temperature or accelerate with heat. Complete potting within pot life.

Packaging & Storage

• Packaging: 50 kg/set (A: 25 kg + B: 25 kg)

• Shelf Life: 6 months

• Storage: Keep in a cool, dry place. Avoid rain and direct sunlight.

Frequently Asked Questions (FAQ)

Q1: What is the thermal conductivity of HN-8820?
A: It is 2.0 W/m·K, making it suitable for high-heat applications.

Q2: Can HN-8820 be cured at room temperature?
A: Yes, it cures in 2–4 hours at 25°C, or faster with heat.

Q3: Is HN-8820 flame retardant?
A: Yes, it is rated UL94 V-0.

Q4: What is the pot life of HN-8820?
A: Approximately 1–2 hours at 25°C.

Q5: Can I use HN-8820 for automotive electronics?
A: Absolutely. It is widely used in HID modules, ignition systems, and power controllers.