Weather Resistant Liquid Silicone Rubber For Outdoor Decoration And Garden Mold Making

Description of Tin Cure Silicone Rubber

HN-6XX series silicone is a tin-curing silicone,consisting of two components, A and B, in aratio of 100:2. It is a silicone that is cured bycondensation reaction at room temperatureafter being stirred evenly.

Application of Tin Cure Silicone Rubber

Technical parameter of Tin Cure Silicone Rubber

1. Mixing: Shake the curing agent (Part B) thoroughly before use. Weigh the components at a ratio of 100:2 (A:B) and mix until uniform. Ensure you scrape the sides and bottom of the container to prevent unmixed material, as insufficient mixing will reduce the mold’s service life.
2. Degassing: Place the mixture in a vacuum chamber to remove air bubbles. Limit vacuuming time to under 10 minutes to avoid affecting the material's properties.
3. Curing: The mold will fully cure within 4 hours at room temperature. Do not force-cure with high heat. If acceleration is necessary, do not exceed 100°C. For optimal performance, allow the mold to rest for 24 hours before its first production run.

Advantages of Tin-Cure Silicone Rubber

Built to Last

Stop worrying about mold tears. Hannast silicone is tougher and more flexible than the competition, giving you more pours per mold and saving you money.

Precision in Every Detail

Our ultra-low shrinkage rate (under 0.2%) means your finished pieces will be a perfect match for the original, down to the finest hair-thin textures.

Safe & Comfortable Workspace

Craft with confidence. Our premium, non-toxic silicone is virtually odorless, making your workspace a healthier environment.

 

Effortless Pouring

Thanks to its excellent fluidity and self-leveling nature, bubbles escape easily on their own. Perfect for beginners and pros alike to get a flawless finish.