Battery Cell Module Potting 2.0 High Thermal Conductivity Silicone Potting Compound 1:1
Battery Cell Module Potting 2.0 High Thermal Conductivity Silicone Potting Compound 1:1
Product Overview for silicone potting compound:
High-conductivity potting compound is a two-component, thermally conductive silicone potting material. Utilizing an addition-curing silicone rubber system, it consists of two components—A and B—which, after being mixed in a 1:1 ratio, cure at room or moderate temperatures. The curing process generates no low-molecular-weight byproducts and exhibits low shrinkage. Its thermal conductivity can reach up to 3.0 W/m·K.
Technical Parameters for silicone potting compound:
viscosity:2000-3000cps
hardness:45-50shore A
thermal conducitivity:2.0(W/M▪K)
Flame retardant rating (V) (UL94):V-0
Product Applications for silicone potting compound:
5G Communications, Microinverters, and Precision Electronics; Third-Generation Semiconductors and Power Module Packaging; New Energy Vehicle Power Batteries and Thermal Management Systems
How to use silicone potting compound:
- Weigh & Stir: Accurately weigh components A and B in a 1:1 ratio. Stir each part thoroughly before mixing to disperse any settled fillers and ensure consistent performance.
- Mix Thoroughly: Blend the two parts (by hand or machine) until the color is completely uniform. Tip: If mixing manually, work in small batches so the glue stays fluid and easy to pour.
- Degas: Place the mixed glue into a vacuum chamber to completely remove any trapped air bubbles. []
- Pot: Pour the bubble-free glue into your device. Tip: Ensure your device and mixing containers are completely clean and dry before starting.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.