XCMG 100 Ton Truck Crane (Model: XCT100_1)
Product Description
This is a used XCMG 100-ton truck crane, model XCT100_1 (XZJ5559JQZ100), produced in December 2020. It has a maximum allowable total mass of 54990kg and a rated lifting capacity of 100t at 3m working radius, in good working condition.
The crane is equipped with a 7-section U-shaped high-strength steel telescopic boom, with a maximum main boom length of 64m and a maximum lifting height of 88m with optional jib, which can meet various heavy lifting needs. It adopts XCMG's intelligent load moment limiter (LMI) system and CAN bus control, which can monitor the working status in real time and ensure safe and efficient operation.
Powered by a high-power engine (Coms version optional) with 333kW rated power, the crane delivers strong performance and low fuel consumption. The 10×6 drive heavy-duty chassis has a maximum travel speed of 80km/h and a maximum climbing degree of 40%, suitable for various complex construction sites such as wind power installation, bridge construction, and petrochemical projects.
1. Basic Product Information
| Item |
Details |
| Product Name |
XCMG 100 Ton Truck Mounted Crane / Mobile Crane |
| Brand |
XCMG |
| Model |
XCT100_1 (XZJ5559JQZ100) |
| Origin |
Xuzhou, Jiangsu, China |
| Certifications |
ISO 9001, CE, GOST (CIS), GCC |
| Condition |
New / Used (Optional) |
| Application |
Heavy Lifting, Wind Power Installation, Bridge Construction, Petrochemical Engineering, Port Handling |
2. Core Technical Parameters
2.1 Lifting Performance (From Nameplate)
| Parameter |
Value |
| Max. Rated Lifting Capacity |
100 Tons (at 3m working radius) |
| Maximum Load Moment |
4600 kN·m (Reference) |
| Main Boom Configuration |
7-section U-shaped High-strength Steel Telescopic Boom |
| Maximum Main Boom Length |
64 m (Typical for 100t class) |
| Maximum Lifting Height (Main Boom) |
65 m |
| Maximum Lifting Height (Main Boom + Jib) |
88 m (with 24m optional lattice jib) |
| Optional Jib Length |
18m / 24m (Two-stage lattice jib) |
| Maximum Working Radius |
50 m |
| Rated Hoist Speed (Main/Aux, No-load) |
130 m/min / 110 m/min |
| Maximum Slewing Speed |
2 r/min |
2.2 Chassis & Vehicle Dimensions (From Nameplate)
| Parameter |
Value |
| Overall Dimensions (L×W×H) |
15810mm × 3000mm × 3990mm |
| Max. Allowable Total Mass |
54990 kg (As shown in nameplate) |
| Complete Vehicle (Kerb Mass) |
54795 kg |
| Cab Capacity |
3 Persons |
| Chassis Brand |
XCMG Special Heavy-duty Chassis |
| Drive Type |
10×6 (Five-axle) |
| Maximum Travel Speed |
80 km/h |
| Maximum Gradeability |
40% |
| Minimum Turning Radius |
26 m |
| Fuel Tank Capacity |
500 L |
| Tyre Specification |
385/95R25 (14.00R25) |
2.3 Power & Transmission System
| Parameter |
Value |
| Engine Model |
WP12.460E62 / Coms (Replaced for Cums) |
| Engine Max. Net Power / Rotating Speed |
333 kW / 1900 r/min |
| Emission Standard |
Euro V / Euro VI (Optional) |
| Transmission |
12-speed Manual Gearbox |
| Steering System |
Hydraulic Power Assisted Mechanical Steering |
| Brake System |
Dual-circuit Air Brake + ABS + Spring Parking Brake |
2.4 Hydraulic & Control System
| Parameter |
Value |
| Hydraulic System Type |
Load-sensitive Variable Piston Pump |
| Hydraulic System Rated Pressure |
34.3 MPa |
| Control Mode |
Electro-hydraulic Proportional Pilot Control + CAN Bus |
| Outrigger Type |
H-type Full-extendable Outriggers |
| Outrigger Span (Longitudinal / Lateral) |
8.7 m / 8.5 m |
| Safety System |
XCMG Intelligent Load Moment Limiter (LMI) + Height Limit + Overload Protection |
| Display System |
10-inch High-definition Intelligent LCD Monitor |
2.5 Working Condition Data (From Nameplate)
| Item |
Recorded Value |
| Production Date |
December 2020 |
| Total Mileage |
10000-20000 km (Used unit reference) |
| Working Hours |
4000-6000 h (Used unit reference) |
3. Key Product Features
- 7-section Ultra-long U-shaped Boom: High-strength steel boom with large section modulus, delivering 100t rated lifting capacity and 64m maximum boom length, ideal for long-distance and high-altitude hoisting.
- High-efficiency Power System: Equipped with high-power engine (Coms version optional) with 333kW output, meeting Euro VI emission standards, strong power and low fuel consumption.
- Intelligent Control System: XCMG's self-developed LMI system and CAN bus control enable real-time monitoring of load, boom angle and working radius, ensuring safe and precise operation.
- Reliable Heavy-duty Chassis: 10×6 drive five-axle chassis with 54.99 tons gross mass, excellent passability, suitable for various complex construction sites.
- Comprehensive Safety Protection: 12+ layers of safety devices including overload protection, outrigger interlock, anti-fall protection and emergency stop, fully guaranteeing operation safety.
- Humanized Design: Spacious cab with air conditioning, adjustable seats and ergonomic joystick layout, effectively reducing operator fatigue.
![]()
![]()
![]()
Spare Parts
Packaging & Shipping
Company Profile
![]()
