Electrical Appliance Testing Equipment

IEC 60335-2-24 Frost Accumulation Water Evaporation Test Apparatus for Refrigerators Product Overview The IEC 60335-2-24 Frost Accumulation Water Evaporation Test Apparatus is specifically designed to simulate water evaporation conditions for frost accumulation testing in refrigerating appliances. This equipment strictly complies with IEC 60335-2-24 Clause 11.102 and Annex BB (Figure BB.1), making it an essential solution for laboratories, quality inspection institutions, and

IEC 60335-2-24 Steel Ball Impact Test Apparatus for Enclosure Drop Impact Testing Product Overview The Steel Ball Impact Test Apparatus is designed in full compliance with IEC 60335-2-24 Clause 21.1DV.2, IEC 62368-1:2018 Annex T, IEC 60950-1, and IEC 60065 standards, providing a reliable method to evaluate the mechanical strength and impact resistance of equipment enclosures. This equipment is widely used in consumer electronics testing, lighting product verification, IT

TZS 683/2022 Cookware Handle Fatigue And Strength Test Apparatus Professional cookware testing machine designed for handle fatigue resistance and strength testing in compliance with international standards. Product Information The design of the handle fatigue resistance and strength test apparatus complies with Clause 10.9 and Annex D of TZS 683/2022 and ES 573:2021 standards. Applied Standards TZS 683/2022 - 10.9 Test of Strength of Handle Attachment: A quantity of mass

EN 12983-1 Cookware Handle Fatigue And Strength Test Machine For Kitchen Handle Strength Test Product Overview The Cookware Handle Fatigue Resistance Tester is a precision testing system designed in full compliance with EN 12983-1:2023 Clause 7.10 and Annex E, as well as ES 573:2021 requirements. This advanced cookware testing equipment is specifically developed to evaluate the fatigue strength, durability, and fixing reliability of cookware handles under repeated load

BS EN 12983-1 Annex A Cookware Handle Burning Resistance Test Apparatus With PLC Control Product Information: The design of the Cookware Handle Burning Resistance Test Apparatus complies with annex F of standard TZS 683:2022, Annex A of standard EN 12983-1: 2023, and ES 573:2021 It uses a standard alcohol lamp, a non-stick pan steel base installation platform, an alcohol lamp moving block, and a wind-proof cabinet. In the wind-proof cabinet, the non-stick pan is first

BS EN 12983-1 Concavity Measurement Device for Cookware Bottom Testing Product Overview The Bottom Concavity Measurement Instrument is a precision testing device specifically designed to evaluate the concavity of cookware bases in accordance with BS EN 12983-1 standards. This equipment ensures accurate measurement of bottom deformation, helping manufacturers maintain product quality, safety, and compliance. Engineered for laboratory and production environments, this tester is

TZS 683:2022 Clause 10.7 Non-Metallic Handles Thermal Insulation Test Apparatus This equipment complies with the test standard requirements of Clause 10.7 according to TZS 683:2022 and Clause 14.8 according to ES 573:2021. Testing Procedure The utensil shall be filled with water at 23°C + 2°C up to 90% of its nominated capacity, and the lid (if provided) placed in position. The water shall be heated using an electric heating coil immersed in the water, so as to reach boiling

Inclined Plane Test Device for Appliance Stability Testing This inclined plane test device enhances stability testing for household appliances, ensuring compliance with international safety standards through precise angle adjustment and reliable performance. Product Overview Designed for conducting stability tests on household appliances that operate on floors, tables, or other flat supporting surfaces. Testing Standards IEC 60335-1:2020 Household and Similar Electrical

Ceramic Material Fuchsine and Methylated Spirit Pressure Test Apparatus This ceramic material fuchsine spirit pressure test apparatus meets the requirements of IEC 60335-1 clause 22.32. It is used to determine if ceramic material is tightly sintered. The test machine includes the test container, pressure boosting device, and explosion-proof chamber with observation window, ensuring easy and safe operation. Technical Specifications Parameter Specification Test Container Volume

IEC61386-1 Flexible Conduit Bending Tester 0-360° Adjustable Product information: Applicable Standards: IEC61386-1:2017clause 10.5 IEC61386-23:2021clause 10.5 Specimens & Scope: Suitable for metal, non-metallic and composite conduits or fittings for electrical or communication systems up to AC 1000 V and/or DC 1500 V. Test Purpose: To evaluate whether conduit fittings with terminations meet the mechanical performance requirements for bending resistance. Test Principle: A

IEC 61386-1 Clause 10.8 Suspended Load Test Apparatus For Conduit Fittings Product information: The Suspended Load Test Apparatus is designed to rigorously evaluate the mechanical performance of metal, non-metallic, and composite conduit fittings under long-term hanging loads. Strictly complying with IEC 61386-1:2017 Clause 10.8, this tester is essential for manufacturers and quality labs ensuring product safety for electrical and communication systems up to 1000V AC / 1500V

IEC 60670-1:2024 High And Low Pendulum Hammer Impact Test Apparatus This test apparatus is designed for impact resistance testing of household and similar electronic and electrical products and their accessories, including plugs, sockets, wall-mounted mounting boxes, screw glands, covers, switches, and lamps. The equipment assesses product safety performance and strength levels. Compliance Standards IEC60068-2-75:2014 "Environment testing for electric and electronic products

IEC60695-11-5 Needle-flame Test Method Fire Hazard Testing Apparatus The Needle Flame Tester evaluates fire hazards in electrical equipment by simulating fault conditions that may cause internal flames. This apparatus assesses whether specimens ignite and measures combustion duration and spread. Product Overview This testing apparatus features a 0.9mm needle-shaped burner tilted at 45° and fueled by butane gas. It conforms to IEC60695-11-5 standards and is required by

IEC61386-1 Manual Load Heat Resistance Tester with 0.5-4N Weights This manual load heat resistance tester is designed to evaluate whether non-metallic and composite conduits meet standard requirements for heat resistance under specified load conditions. Applicable Standards & Scope Compliant with IEC61386-1:2017 clause 12.2. Suitable for testing metal, non-metallic, and composite conduits or fittings for electrical or communication systems up to AC 1000 V and/or DC 1500 V.

IEC61386-1:2017 Clause 10.3 Low Temperature Impact Test Apparatus Product information: Applicable Standards : IEC61386-1:2017clause 10.3 Specimens & Scope : Suitable for metal, non-metallic and composite conduits used to protect and manage insulated wires and/or cables for electrical or communication systems up to AC 1000 V and/or DC 1500 V. Test Purpose : To evaluate the mechanical impact resistance of conduits after low-temperature conditioning. Test Principle : The

IEC 60335-2-84 Toilet Seat Testing Machinery Computer-controlled opening and closing test equipment designed to evaluate the mechanical strength and durability of toilet seats under repeated stress conditions during normal use. Product Overview This testing machinery complies with IEC 60335-2-84 "Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilet appliances" clauses 21.103.1 & 21.103.2. It verifies whether toilet seats possess

IEC 61386-1:2017 Clause 10.2 Conduit Compression Resistance Tester Product information: Applicable Standards : IEC 61386-1:2017 Clause 10.2 Specimens & Scope : Suitable for metal, non-metallic and composite conduits used to protect and manage insulated wires and/or cables for electrical or communication systems up to AC 1000 V and/or DC 1500 V. Test Purpose : To evaluate whether the mechanical performance of conduits after compression meets the standard requirements. Test

IEC61032 Test Probe D with 1N Force For IP4X And Shock Hazard Verification This precision test probe conforms to IEC61032 Figure 4 Test Probe D standards, designed for comprehensive safety verification including IP4X protection and shock hazard assessment. Product Overview The IEC61032 Test Probe D is engineered to verify protection against access to hazardous parts and assess enclosure integrity. This essential testing tool meets rigorous international standards for

IEC 61032 Test Probe 11 With Equipped 75 N Force Dynamometer Safety Compliance Tool Product Overview: The IEC 61032 Test Probe 11 equipped with a 75 N dynamometer is a specialized safety evaluation tool engineered for precise verification of protective barriers in electrical and electronic devices. Designed in strict accordance with the IEC 61032 Figure 7 standard, this test probe helps ensure that enclosures and openings in equipment prevent accidental contact with hazardous

AS/NZS 3112:2017 Figure 2.8 Plug Pin Bending Test Machine Product information: Applicable Standards: JIS C 8303 Figure 2 and Clause 7.10 AS/NZS 3112:2017 Figure 2.8 and Clause 2.13.7.2 Test Samples : Plugs with insulating sleeves. Application : Used to test the bending resistance of plug pins with insulating sleeves, in order to verify the mechanical strength of the plug structure. Test Principle : A motor-driven fixture applies force at a position 14 ± 0.5 mm from the plug