Titanium Flange

Titanium Blind Flange Class 150-2500 Gr2 This factory direct titanium blind flange has a raised face and is made for Class 150 to 2500 service in Gr2, Gr7 and Gr12. It is forged and CNC machined, then supplied with ultrasonic testing and a material test report to EN10204 3.1, giving high corrosion resistance and strength for the chemical industry and other demanding piping systems. Technical Specifications Standard ANSI B16.5 Material / Grade Gr2, Gr7, Gr12 Size NPS 1/2" -

Titanium Alloy Flange ASTM B16.5 Gr2 Gr7 Gr12 Titanium flanges connect pipes, valves and equipment in chemical, petrochemical, power and water treatment systems. A flange joint combines two flanges, a gasket and a set of bolts and nuts; tightening the nuts deforms the gasket so that it fills the uneven areas of the sealing face and forms a tight, leak proof connection. This titanium alloy flange is forged and CNC machined in Gr2, Gr7 and Gr12 with a polished raised face RF

Titanium Flange Forged WN BL SO SW PL Types These titanium flanges are forged and CNC machined in a full range of types, including weld neck, slip on, blind, socket welding, plate and lap joint. They are supplied in Gr1 to Gr9 with a polished surface and offer a long service life with corrosion resistance and high yield and tensile strength. Standard sizes run from 1/2 inch to 30 inch and pressure classes from 150 to 2500. Technical Specifications Standard ANSI B16.5, JIS

Forged CNC Titanium Blind Flange Gr2 Class 150 A blind flange is a solid disk used to block off a pipeline or to create a stop. It is machined like a regular flange, with mounting holes around the perimeter and a gasket sealing ring cut into the mating surface, but it has no opening for fluid to pass. This titanium blind flange is forged and CNC machined from Grade 2 titanium to ASTM and ANSI B16.5, runs from 1/2 inch to 80 inch, and is used to blank off flow on construction,

Titanium SO Slip On Flange for Seamless Pipe DN10 A slip on flange, also called a flat welded or tower welded flange, is slipped over the pipe end and welded in place. It is one of the most common flanges for connecting containers and pipelines because it is easy to assemble and economical, and the joint keeps vibration in the line relatively small. This SO flange is forged and CNC machined in Gr2, Gr7 and Gr12, polished, and supplied in sizes from 1/2 inch (DN10) up to 80

Polished Gr2 Titanium Weld Neck Flange HG20592 The polishing surfaced Grade 2 titanium welding slip pipe flange is a high performance component built for secure piping connections. Made from Grade 2 titanium, it combines strength and low weight with strong corrosion resistance, and its polished finish both improves appearance and helps resist corrosion for easier maintenance. The weld neck design allows easy alignment and installation for a reliable joint, and the same flange

DIN2501 Gr2 Titanium Plate Flange PN10 DN10-1000 LHTi makes this DIN 2501 titanium plate flange in Grade 2, and also in Gr1, Gr5, Gr7 and Gr12. A plate (blank) flange has a flat design with no raised sealing face and a thicker body than other flange types, which gives enough strength and rigidity for bolt attachment and sealing. It is aligned with the pipe or equipment port and fixed with bolts through pre-drilled holes, using a full-face gasket to cover the whole surface and

ASME B16.5 Titanium Weld Neck Flange Class 150 A titanium weld neck flange to ASME B16.5 is welded to the end of a piping system, where its long tapered hub transfers stress from the flange to the pipe and gives a robust, leak-free joint for high pressure service. These flanges are produced by casting, forging and precision machining in Gr1, Gr2, Gr5, Gr7 and Gr12 titanium, in Class 150 with RF, FF, TG or RJ faces. Titanium resists corrosion and withstands high temperature

Polished Titanium Welding Flange ISO Certified This titanium welding flange uses a welding connection so it can be joined to a pipe end, giving a firm and leak free joint on pipelines and process equipment. The polished surface removes oxide and tool marks, which helps the gasket seat evenly and reduces the risk of crevice corrosion at the joint. Titanium resists chlorides, sea water and many acids, keeps its strength at elevated temperature and weighs about half as much as

ANSI Titanium Blind Flange 150#-2500# CE Certified LHTi produces this ANSI standard titanium blind flange by casting and machining titanium, then finishing it with a welding connection. It is supplied CE certified together with an ISO9001, SGS and TUV quality record, and is built for pressure ratings from 150# up to 2500#. The blind design seals the end of a pipeline, valve or vessel opening in pipeline, oil and gas and chemical service. Technical Specifications Type Blind

Forged Gr2 Titanium WN RF Flange ANSI B16.5 This welding neck flange is forged from Grade 2 titanium, CNC machined and finished with a raised face to ANSI B16.5. The long tapered neck is butt welded to the pipe so the joint carries the load smoothly and holds pressure well, which is why a WN flange is often selected for high pressure and high temperature lines. Titanium keeps the joint light and strongly resistant to chlorides, sea water and many acids, and the forged

ASME B16.5 Titanium Weld Neck Flange Class 150 Our ASME B16.5 Grade 2 and Grade 5 titanium weld neck flanges (WNRF) Class 150 are precision-engineered for chemical industry applications. Manufactured through casting, forging and machining processes, they ensure secure, leak-free connections in demanding industrial pipeline systems. The flange is supplied in SO or WN type with a smooth or raised face, in sizes and pressure ratings made to requirement. Technical Specifications

Titanium Weld Neck Flange ASME B16.5 JIS DIN GOST This forged titanium weld neck flange is supplied to a range of international flange standards, including ASME/ANSI B16.5, B16.36 and B16.47, AWWA C207-1994, JIS/KS B2220-2010, UNI EN1092-1 and GOST 12821-80 and GOST 33259-2015. Pressure ratings cover Class 150 to Class 2500 for the ASME series and PN6 to PN250 for the EN series, sizes run from DN15 to DN2000 (1/2 inch to 36 inch), and the flange is produced in Grade 1, Grade

ASME B16.5 Gr2 Polished Titanium Slip On Flange This titanium slip on flange is forged and machined to ASME B16.5 with a polished surface, and it is available in Grade 1, Grade 2, Grade 5, Grade 7 and Grade 12 as well as in TA1, TA2, TC4, TA9 and TA10 material. Pressure ratings cover Class 150, 300, 600, 900, 1500 and 2500, and each piece can be supplied with ultrasonic testing and a material test report to EN10204.3.1. Technical Specifications Product Type Slip on (SO)

ASTM B381 F2 Titanium WN Blind Flange 1/2-24 Inch Titanium weld neck flanges have good strength and extremely hard bearings, and are used in marine applications, the chemical industry and many other forms. This F2 titanium WN, slip-on and blind flange is forged to ASME B16.5 and ASTM B381 and CNC machined with a polished surface and an RF sealing surface. It is supplied in Gr2, Gr5, Gr7 and Gr12 in sizes from 1/2 inch to 24 inch (DN10-DN2000) and pressure classes from 150# to

Class 150 Titanium Blind Flange BLRF RF ASME B16.5 This ASME B16.5 Class 150 raised face blind flange (BLRF) is made from titanium Gr2, Gr5 (Ti-6Al-4V) and Gr7 (Ti-0.2Pd) and is designed to seal pipeline ends securely. Class 150 suits medium pressure pipeline systems with high stress resistance, the raised face gives a leak proof joint under pressure, and the flange is produced to ASME SB381 and GB/T 16598 with RF, FF and RTJ facing available. Technical Specifications Product

Gr2 Gr5 Titanium Blind Flange Class 300 RF The ASME B16.5 titanium blind flange (Ti Gr2, Ti Gr5) with a Class 300 raised face is designed for industries that need exceptional corrosion resistance and mechanical strength. Manufactured in compliance with ASME B16.5, it delivers reliable sealing performance and secure pipeline closures in demanding operational environments. The flange is forged and CNC machined in DN15-DN300 and is supplied with material and dimension reports as

DIN 2632 PN10 Titanium Weld Neck Flange This DIN 2632 weld neck flange is made from titanium to the German standard with a PN10 pressure rating. The weld neck design reduces stress concentration at the joint and the raised face gives effective gasket sealing. The flange is produced by casting, forging and precision machining in Gr2, Gr5, Gr7 and Gr12, in sizes from DN10 to DN1000, and is used for secure, leak-free connections between pipes, valves and equipment. Technical

GR2 Titanium Blind Flange DN200 PN16 RF This GR2 titanium blind flange is DN200 with a PN16 rating and a raised face sealing surface, forged and CNC machined to ANSI B16.5, ASTM B16.5, JIS B2220 and DIN2627-2628. Blind, weld neck, slip on, socket weld, plate and lap joint types can be supplied in Grade 1, Grade 2, Grade 3, Grade 4, Grade 7 and Grade 9 with a polished finish. Technical Specifications Product Type Blind flange (BL), also WN, SO, SW, PL and lap joint Standard

UNS31803 Duplex Steel Weld Neck Flange Class 300 This long weld neck flange is made from UNS31803 duplex steel for chemical and metallurgical service. It is forged and CNC machined to ANSI, DIN, JIS and ASME standards, including ANSI B16.5 and ASME B16.47, with a pressure rating of 0.6~32 MPa. Duplex steel combines high strength with excellent resistance to chloride stress corrosion cracking, so the flange performs reliably in aggressive process media. Technical Specification