60mw 1064m High Head Pelton Hydro Turbine

1064m High Head 60000kw Pelton Water Wheel Turbine

Application

Pelton Water Wheel Turbine are used in high-head, low-flow hydraulic environments, so hydropower stations are located in remote mountainous areas. Dams are built to store water in mountain creeks. The water is delivered to the open channel through the dam, and the water flows through the mountains for several kilometers or more than ten kilometers to reach the front pond of the power station. An overflow weir is set near the front pond. When the output of the turbine decreases and the channel water supply is too late to adapt, the excess water is discharged through the overflow weir. Open the front pool gate, the water flows through the penstock, the main valve of the turbine, and enters the nozzle of the turbine.

Technical parameters:

Horizontal shaft impact type Rated power(KW):110~7500

About us

The company has provided 120 sets of Pelton Water Wheel Turbine for 58 hydropower stations, the maximum unit capacity is 60 MW, the water head range is 182m-1064m, the runner diameter is 45cm-233cm, the rotating speed is 375rpm-1000rpm, and the generator frame is 0.56m-4.5m.

Mamufacturing capacity

Some cases