Bently Nevada

330104-06-12-10-02-00 Bently Nevada 3300 XL 8 mm Probe Overview The Bently Nevada 330104-06-12-10-02-00 is a premium 3300 XL 8 mm Proximity Probe featuring a Metric M10 x 1 thread and integrated stainless steel armor . This non-contacting eddy current transducer system provides an output voltage directly proportional to target distance. It is engineered to monitor both static displacement (axial position) and dynamic vibration in critical high-speed industrial rotating

330103-00-06-10-02-CN Bently Nevada 3300 XL 8 mm Proximity Probe The 330103-00-06-10-02-CN is a Bently Nevada 3300 XL 8mm Proximity Probe designed for precise shaft vibration and displacement monitoring in rotating machinery like turbines and compressors. It features an M10×1 threaded housing with a 0mm unthreaded length, 60mm overall case length, and a 1.0-meter cable terminated with a ClickLoc™ miniature coaxial connector. Built to comply with API 670 standards, this rugged

330104-00-15-10-02-00 Bently Nevada 3300 XL 8 mm Proximity Probe Product Overview The 330104-00-15-10-02-00 is a Bently Nevada 3300 XL 8 mm metric proximity probe equipped with stainless steel armor. Operating as part of an eddy current transducer system, this non-contact sensor generates an output voltage directly proportional to the distance between the probe tip and a conductive target surface. It is primarily engineered for fluid-film bearing machines to monitor dynamic

In-stock 1900/55 fan monitor with model verification, fast dispatch and machinery-monitoring spare support.

990-05-70-02-01 Bently Nevada Loop-Powered Shaft Vibration Transmitter for DCS/PLC Control System Integration Product Overview This transmitter converts shaft vibration into a 4-20mA DCS/PLC signal for CSA Division 2 hazardous areas. It eliminates the need for monitoring racks, providing a compact and direct vibration tracking solution for rotating machinery. 0-5 mils pp Range Measures micro-level displacement to flag machinery faults early. 7.0-Meter System Matches 3300 NSv

330910-00-11-10-02-05 Bently Nevada Armored Proximity Probe for Confined Space Compressor Monitoring Engineered for tight spaces and shafts under 51 mm, the Bently Nevada 330910-00-11-10-02-05 probe provides precise vibration monitoring where standard sensors fail to fit. Its armored M10×1 housing shields cabling from hot oil and mechanical wear. Certified for hazardous zones, it eliminates side-view interference, making it ideal for high-speed centrifugal compressors.

900800XL-090-03-01 Bently Nevada 9000XL 5/8mm Proximitor Sensor Product Overview RVIS 9000XL Proximitor Sensor (P/N: 900800XL-090-03-01) Application: Continuous online monitoring of shaft vibration and axial displacement in rotating machinery (turbines, compressors). System Length: 9 Metre System (Requires probe and extension cable total length to strictly equal 9 meters). Probe Compatibility: 5mm or 8mm proximity probes. Scale Factor / Output: 7.87 V/mm (200 mV/mil) linear

330104-00-15-05-02-00 Bently Nevada 3300 XL 8 mm Proximity Probe Product Specifications Brand/Series: Bently Nevada / 3300 XL 8mm System Product Name: Non-contact Eddy Current Proximity Probe. Full Part Number: 330104-00-15-05-02-00 Thread Size: M10 x 1 thread. Case Length: 0 mm unthreaded length / 150 mm overall length. Cable Length: 0.5 meters (1.6 feet). Protection: Built-in stainless steel armor. Connector: ClickLoc miniature coaxial connector Approvals: Standard version

330105-02-12-15-12-CN Bently Nevada 3300 XL 8 mm Reverse Mount Proximity Probe Product Overview Model Type: 3300 XL 8 mm Reverse Mount Proximity Probe Thread Type: 3/8-24 UNF thread, reverse mount configuration Total Cable Length: 1.5 meters (4.9 feet) Connector Type: Miniature ClickLoc coaxial connector Cable Protection: FluidLoc® cable (prevents oil and process fluids from leaking through the cable interior) Hazardous Area Approvals: CN option (ATEX, IECEx, and Chinese

330104-03-06-10-02-00 Bently Nevada 3300 XL 8 mm Probe Product Overview High-Performance Measurement & Standard Compliance Dual Capabilities: Measures both static values (axial position) and dynamic values (radial vibration) API 670 Compliant: Fully complies with API 670 Standard for mechanical configuration, linear range, accuracy, and temperature stability Primary Applications: Optimized for fluid-film bearing machines, Keyphasor reference and speed measurements Complete

330103-08-15-10-02-00 Bently Nevada 3300 XL 8 mm Proximity Probe Product Overview The Bently Nevada 330103-08-15-10-02-00 is an 8 mm eddy current proximity probe. It provides non-contacting radial vibration and axial position measurements for critical industrial rotating machinery. Key Features Interchangeable: Supports complete swapping of system parts without bench calibration. ClickLoc Connector: Gold-plated coaxial connector that locks securely by hand. Rugged Tip: Molded

In-stock 330104-08-16-10-02-00 8 mm proximity probe with model verification, fast dispatch and machinery-monitoring spare support.

MEDAR 917-0042 is a discontinued weld control card processor module for compatible legacy resistance-welding systems. Verify the host control, revision and connectors before ordering.

Bently Nevada 330104-13-20-50-02-00 is a long-case armored 3300 XL 8 mm metric proximity probe with M10 x 1 thread, 200 mm case and 5 m cable for machinery vibration and position measurement.

Bently Nevada 330102-03-28-10-02-00 is an armored 3300 XL 8 mm proximity probe with 3/8-24 UNF thread, 2.8 in case and 1.0 m cable for shaft vibration and position measurement.

330103-00-14-05-02-00 Bently Nevada 3300 XL 8mm Proximity Probe with 140mm Metric Case Product Profile The Bently Nevada 330103-00-14-05-02-00 features an extended 140mm metric body, a 0.5-meter unarmored cable, and a ClickLoc connector. This 8mm proximity probe provides non-contacting shaft vibration and displacement monitoring. 140mm Case Length: Fits thick machine walls, allowing precise probe-gap adjustment ClickLoc Connector: Provides a secure, vibration-resistant

2-Wire Loop-Powered Vibration Transmitter 990-10-XX-01-00 MOD:165353-01 Bently Nevada for PLC/DCS Control Systems The Bently Nevada 990-10-XX-01-00 MOD:165353-01 transmitter outputs a 4-20 mA signal for shaft vibration monitoring. It connects straight to PLC or DCS networks without separate monitors, saving cabinet space via its 35 mm DIN-rail design. Scale Factor: 200 mV/mil (7.87 V/mm) High sensitivity to catch microscopic rotor instability before failures occur. System

330104-00-24-50-02-00 Heavy Duty Armored Proximity Probe for Turbomachinery Shaft Vibration Monitoring The Bently Nevada 330104-00-24-50-02-00 is an 8mm proximity probe with a 240mm threaded case and a 5.0-meter armored cable. It measures shaft vibration and displacement on rotating machinery within harsh industrial environments. 240 mm Case Length: Penetrates thick machine walls to reach internal bearing housings. 5.0 Meter Armored Cable: Routes directly to field enclosures

330104-00-06-10-02-CN Bently Nevada 3300 XL 8 mm Proximity Probe System Model: Bently Nevada 3300 XL 8mm Thread Type: M10 × 1 (Metric / Armored) Dimensions: 0 mm unthreaded length / 60 mm overall case length Cable Length: 1.0 meter (with ClickLoc connector) Linear Range: 2.0 mm (80 mils) Scale Factor: 7.87 V/mm (200 mV/mil) Operating Temp: -52°C to +177°C (-62°F to +350°F) Approvals: CN option (Certified for Chinese hazardous area standards) Global Distribution Network Amikon

330877-040-37-00 Bently Nevada 3300 XL 50 mm Extension Cable Product Specifications Part Number: 330877-040-37-00 Length: 4.0 Meters (13.1 ft) Cable Type: Armored FluidLoc Triaxial Approvals: None (Standard/Safe Area) Temperature: -51°C to +200°C Application: Connects 3300 XL 50mm proximity probe to sensor Global Supply Network Amikon supplies industrial automation spare parts, mainly PLC, DCS, and TSI systems, to more than 160 countries. North America: Steady demand,