Baker Type O Ring Redress Kit #10 Setting Rubber Seal Downhole Completion Tools
Baker-Style #10 Setting Tool O-Ring Redress Kit — Component Selection
#10 Setting Tool O-Ring Schedule
This listing covers replacement O-rings and specified rubber seals for a Baker-style Number 10 setting tool. Identify the actual tool manufacturer, model and revision before selecting a kit. Keep the setting-tool seal schedule separate from #10 firing-head or BP3.SEC kits so the quotation reflects the assembly being serviced.
Shanghai Qinuo Offered Kinds of Repair Kits use for Oil & Gas Filed
• #10 setting tool
• DWS 3 5/8 COMPACT
• Grease Tubes Seal Kit
• 3 1/2” Shorty Kits
• 3 - 1/8" Weight Bar Kit
• #10 Baker Firing Head Kit
• #20 Firing Head Kit
• #20 BP3.SEC kits
• #10 BP3.SEC kits
• T-BRT redress kit
• T-1 Set
• GC Stripper Head Redress Kits
• 2" Normal Swivel Kit
• 2" SMI-Oversized Swivel Joint Kit
• 3" SPM Swivel Kit
• 3" FMC Swivel Kit
• 3" Wide Swivel Kit
•4" 10k 1002 FET/Flowvalve
• 4" 15k Kemper Swivel Kit
• 4" 15k Forum Swivel Kit
• 4" 15k FlowValve Swivel Kit
• 4" 15k TSI Swivel Kit
1" 1502, Buna / FKM/ HSN
1-1/2" 1502, Buna / FKM/ HSN
2" 602/1502, Buna / FKM/ HSN(Brass/Stainless Anti-Ext)
3" 602/1502, Buna / FKM/ HSN(Brass/Stainless Anti-Ext)
4" 602/1002/1502, Buna / FKM/ HSN(Brass/Stainless Anti-Ext)
2" FIG 206, Buna / FKM/ HSN(AS568-228)
3" FIG 206, Buna / FKM/ HSN(AS568-236)
4" FIG 206, Buna / FKM/ HSN(AS568-346)
2" X 1" Low Torque Plug Valve Seal Kit
2" X 2" Low Torque Plug Valve Seal Kit
3" Low Torque Plug Valve Seal Kit
4" Low Torque Plug Valve Seal Kit
Qinuo Equipment list:
| 20 Cavities Rounding Comounding Machines | Automatic Powder Distribution Machine | Automatic Oil Distribution Machine | ||||||
| 8 Sets of Open Cell Mixers ( From 6 inches to 16 inches) |
5 Layers of Material Cooling Machine | 3 Sets of 55kq Closed Cell Mixers | ||||||
| 2 Sets of Material Preform Machine | 3 Sets of Silicone Vacuum Mixer | 65 mm Diameter Silicone Extrusion Line | ||||||
| JG-65mm Diameter Silicone Extrusion Line | 75mm Diameter Silicone Extrusion Line | 90 mm Diameter General Rubber Extrusion Line |
||||||
| 75mm Diameter General Rubber Extrusion Line |
Fiber Reinforced Rubber Extrusion Line | Vulcanizing Tank | ||||||
| Adhesive Machin | 28 Sets of Small Vulcanizing Molding Machines(From 50Ton to 100 Tons) | |||||||
| 25 Sets of 200 Ton Vulcanizing Molding Machine |
4 Sets of 200 Ton Injection Compression Machine |
2 Sets of 200 Ton Vacumm Compression Machine |
||||||
| 2 Sets of 250 Ton Vulcanizing Molding Machine |
2 Sets of Horizontal Molding Machine | 4 Sets of 300 Ton Vulcanizing Molding Machine |
||||||
| 2 Sets of 300 Ton Injection Compression Machine |
Punching Machine | Tensile Strength Tester | ||||||
| Brittleness Tester | Hardness Tester | Thickness Gauge | ||||||
| Mooney viscometer | Rheometer Tester | Analytical Balance | ||||||
| Electrical Resistance Measurer | Density Tester | 2 sets Aging Testing Oven | ||||||
Qinuo Material processing range:
Silicone |
SBR | ACM | PE | |||||
| EPDM | NBR | IIR | PC | |||||
| Neoprene | Silicone Sponge | CSM | PP | |||||
| Urethane | Closed Cell Sponge | ABS | PA | |||||
| HNBR | Hard PVC | TPE | ||||||
| NR | ECO | Soft pvc | TPV | |||||
| POM | TPU | |||||||
Qinuo Custom Capabilties:
| Customized services | Plastic & Rubber bonding | Mold Design | ||||||
| Customized extrusion | Extrusion and bonded gaskets | Mold Production | ||||||
| Injection Molding | Self Adhesive rubber profile | Customized Package | ||||||
| Sheet Cutting | Rubber Complex Intake Hose | Problem Solving | ||||||
| Standard Size extrusion | Reinforced rubber tubes | Assembly | ||||||
| Special Compound design | Rubber Solution Suggestion | Sourcing | ||||||
| Rubber& Metal bonding | ||||||||
Product Description
Number 10 is an equipment designation rather than an O-ring size. Similar-looking rings or the same nominal kit number are insufficient to establish component interchangeability.
Specify the original compound and Shore A hardness for each component. Include the contacting fluids and operating conditions when requesting an alternative material.
|
Material: |
Compound per #10 setting tool service specification and component position |
|
Hardness |
Shore A hardness and tolerance per specified rubber component |
|
Mode of Production |
Compression, injection, injection transfer, extrusion, silicone liquid injection |
|
Production Capabilities |
Wide ranges of our machines including 150T,200T,250T, 300T and 500T |
|
Size/Color |
Component dimensions and identification colors per approved service schedule |
Other relative rubber products for oil drilling use:
Moulded Rubber Products
Rubber Bonded with Metal Products
Packing and shipping
1: Express: S.F. , DHL, UPS, TNT, FedEx ect, for urgent and small order.
2: Air shipment: air port to air port , or air port to door.
3: Sea shipment: suitable for bulk goods. it will takes more longer time than air shipment.
Our company
Shanghai Qinuo Industry Co. Ltd
provides rubber product design and production services for industrial applications.
Our company provides professional plastic parts, rubber parts and maching parts design and production services, products mainly used in automobiles, household appliances, machinery equipment and oil industry and other fields. We have a professional production and sales team, "High-Quality, High Professionalism, High Efficiency" are the principles of doing things.
We have two factories, more than 30 injection molding machines, molding machines and CNC lathes. Our company is located in Pudong New Area, Shanghai. Elegant environment, convenient transportation, Only need 30 minutes from our company to Pudong Airport.
Our quality management system is certified to ISO 9001. Include any product-specific material or inspection documentation requirements with the enquiry.
FAQ
1. What does Baker-style #10 identify?
It identifies the setting-tool reference used for this replacement kit listing. Supply the actual manufacturer, full model and drawing revision to establish the component requirements; the description alone does not confirm fit for every Number 10 tool.
Use the tool maintenance parts list to identify the required ring positions and quantities before approving a supplied set.
2. Are #10 firing-head and BP3.SEC seals included?
a. Define the setting-tool maintenance scope.
b. List the required setting-tool seal part numbers.
c. Identify firing-head components as a separate kit request.
d. Keep BP3.SEC components under their own assembly schedule.
e. Confirm dimensions and quantities for each supplied component.
f. State whether supporting rings or other service parts are required.
g. Check the quotation against the complete maintenance parts list.
3. What is needed to specify individual replacement O-rings?
1. Part number and installation position.
2. Inner diameter, cross-section and tolerances.
3. Compound reference and Shore A hardness.
4. Operating fluid and relevant temperature conditions.
5. Quantity and component inspection requirements.
4. How can a #10 setting tool kit quotation be prepared?
1. Manufacturer, full tool model and revision.
2. Original seal schedule or component drawings.
3. Maintenance scope and quantities per kit.
4. Material, hardness and service conditions.
5. Number of kits and packaging labels.
More information about AS568-226 Colored Buna 90 Shore A Rubber O Rings Use for Seal Block Top Kits
Send the Baker-style #10 setting tool component schedule for a matched O-ring redress kit quotation.
Welcome to contact us for more information.
www.unionseal.com
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.