Royal Way Effective High Performance Hammer Union Seal For Oil Drilling
Product Introduction
For oil-drilling hammer union replacement, identify the exact union figure, nominal size, part revision and seal profile. Provide operating pressure cycles, drilling-fluid composition and temperature for compound selection. Confirm the rubber lip and any backup component against the mating hardware drawing.
Specify the rubber compound and its nominal Shore A hardness separately from any rigid backup component. An 85 Shore D requirement must identify the component and material it applies to; it does not define rubber sealing-lip hardness. The material table below supports selection review rather than a universal service rating.
| Material | Service Temperature Requirements | Selection Considerations | Compatibility Checks |
| NBR(Nitrile, Buna-N) |
Requested -40°C to 120°C; confirm selected NBR compound Confirm continuous and transient temperatures |
1. Specify compound grade and nominal hardness 2. Review mechanical, wear and compression-set requirements 3. Check the exact oil or grease formulation |
Review glycol-based brake fluids, acids and cleaning agents separately |
| HNBR |
Requested -40°C to 160°C; confirm selected HNBR compound Confirm exposure duration and temperature cycling |
1. Hydrogenated nitrile compound selected for actual service 2. Confirm compound-specific temperature limits 3. Agree extrusion, abrasion and wear acceptance requirements 4. Water and steam exposure requires compound-specific review with actual temperature, pressure and exposure duration 5. Sour gas requires defined H2S conditions and qualification tests 6. Specify oil composition and CO2 exposure conditions |
Review chlorinated hydrocarbons, polar solvents and acids against compound data |
| FKM(Fluorocarbon) |
Requested -26°C to 230°C; confirm selected FKM compound Confirm low-temperature flexibility and upper service limit |
1. Specify oil or fuel composition and exposure temperature 2. Review chemicals against the exact FKM compound 3. Include outdoor aging requirements when applicable |
1. Low-temperature performance depends on compound grade 2. Sour gas, amines, hot water and steam require specific compatibility review |
| PTFE |
Define PTFE grade and component construction for service temperature Do not apply a generic temperature range to the complete seal |
1. Review chemical exposure for the specified PTFE grade 2. Confirm profile, surface finish and mating clearance 3. Include creep and deformation requirements 4. Qualify temperature and pressure within the assembly |
|
1'' 1502, Buna/FKM/HSN
1-1/2'' 1502, Buna/FKM/HSN
2'' 607 style seal ring
2'' 602/1002/1502, Buna/FKM/HSN(Brass/Stainless backup)
3'' 602/1002/1502, Buna/FKM/HSN(Brass/Stainless backup)
4'' 602/1002/1502, Buna/FKM/HSN(Brass/Stainless backup)
2'' FIG 206 — confirm O-ring dimensions and dash reference
3'' FIG 206 — confirm O-ring dimensions and dash reference
4'' FIG 206 — confirm O-ring dimensions and dash reference |
Company Profile
Shanghai Qinuo Industry Co., Ltd was established in the year of 2013 at Shanghai Free Trade Zone, we are a new and high-tech enterpriseintegrating R&D, production and sales. Since its inception, we adhering to the "Quality for Survival, Innovation Competes For Development " concept, continuous development and innovation, we won a good reputation at home and abroad, Qinuo has a brand name "SHQN".
Qinuo provides professional rubber products design and production services, mainly used in oil & gas industry, automobiles, household appliances, machinery equipment etc. We have a professional production and sales team, "High-Quality, High Professionalism, High Efficiency" are the principles of doing things.
We adopt comprehensive quality management system based on the ISO9001, our products are
mainly exported to the United States, Canada, Britain, Germany, Australia more than 100 countries extend all over the globe. Qinuo is sincerely wishing to cooperate with you.
Packing&Delivery
Rubber o ring
Rubber seal kits — custom packing or labels available
- #10 setting tool - With burst disk
- #20 setting tool - With burst disk
- AP Compact Setting Tool Kit
- Grease Tubes Seal Kit
- 3 1/2” Shorty Kits
- 3 - 1/8" Weight Bar Kit
- #10 Baker Firing Head Kit
- #20 Firing Head Kit
- #20 BP3.SEC kits
- #10 BP3.SEC kits
- T-BRT redress kit
- T-1 Set
- GC Stripper Head Redress Kits
![]()
Related Rubber Parts
FAQ:
Q1: Are you manufacture or trading company?
We are manufacture. Our factory located in Haimen District, Nantong City, Jiangsu Province.
Q2: How can we guarantee quality?
Approve a sample against the seal drawing, compound specification and agreed inspection criteria before production. Check dimensions, material documentation and batch identification before shipment.
Q3: Can I get some samples?
Sure, samples are available,3-10 samples are for free. Please note that only needs to pay for shipping cost.
Q4: Can you produce OEM products?
Send the union part reference, drawing or representative sample, and operating conditions. Agree mold dimensions, component materials and acceptance requirements before production.
Q5: What's the term of payment ?
Amount < US$5000,100% paid in advance by paypal or T/T;
Amount >= US$5000, 30% paid in advance, 70% balance before shipment by T/T
Q6: Can you manage the shipment?
Sure, we can arrange different ship ways according to the goods final packing: by express, by air or by sea.
Q7: What is the lead time?
Stock goods: generally within 7days according to the quantity.
Produce Goods: 7-25days according to the packing and quantity.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.