1mm-30mm NBR Other Oil Well Accessories , Industrial Rubber Cable Entry Sleeve

Custom NBR Rubber Boot and Wire Sleeve — Cable Entry Geometry and Fit

NBR wire boot and cable gland sleeve: opening dimensions, coverage and installation

1) A push-on boot covers the external cable entry area. Specify the cable outside diameter, gland body profile and required coverage length; check the opening fit and clearance before installation.
2) This product is described as NBR rubber. PVC shrouds and HNBR boots are separate material options requiring approval; they must not be assumed to have the same flexibility or fluid compatibility.

Other relative rubber products:

Application selection: provide oil, gas or condensate composition, exposure location and temperature. An external boot does not establish a pressure seal, electrical insulation rating or hazardous-area approval.

Packing and shipment :

1: Express shipment for samples and small orders; confirm carrier and destination in the quotation.

2: Air shipment: specify airport delivery or door delivery.

3: Sea shipment for bulk orders; agree packing, route and delivery schedule.

Shanghai Qinuo Industry Co. Ltd supplies custom rubber and plastic components. For an NBR wire boot, provide a dimensioned drawing or mating cable and gland dimensions for quotation.

Define the entry opening, wall thickness, overall length and any steps or lips. Include assembly direction, stretch during installation and nearby components that could interfere with the boot.

A drawing or sample should identify the surfaces to be covered and the required clearance. Agree dimensional tolerances and sample inspection points before a repeat production order.

ISO 9001 quality management. Request compound-specific documentation when RoHS or other regulatory requirements apply; a material family name does not establish compliance.

Mould corner view for the rubber parts:

Ordering a Custom NBR Wire Boot:

For a replacement boot, send the cable outside diameter and gland body dimensions together. Specify whether the boot must slide over an installed connector or be fitted before cable termination.

State the expected bending movement, installation stretch and exposure to fluids or cleaning agents. These details guide compound and geometry selection without assigning unsupported performance ratings.

For repeat orders, reference the approved drawing revision, material designation, color and sample. Confirm changes to openings or coverage length before replacing an existing boot.

Contact us with your drawing and installation requirements for the Custom NBR Rubber Boot / Wire Sleeve