Oil Well Rubber Packer Elements , HNBR Nitrile Oilfield Rubber Products
HNBR and NBR Rubber Packer Elements for Oil Well Tool Replacement
Application
Oil-well rubber packer elements and cup seals in HNBR or NBR are reviewed against the original tool drawing and service conditions. Identify the exact part revision, mounting geometry and sealing mechanism before ordering a replacement. FKM alternatives require separate fluid and temperature review.
We manufacture both Wire Skeleton / Wire Mesh / Wire Frame Packer Cups and Rubber Packer Cups without any mesh.
Nominal application sizes include 3.5, 4.5 and 5.5 inches. Broader cup applications from 1-1/4-inch tubing through 7-inch casing require actual bore and finished seal dimensions; nominal size alone does not identify the replacement part.
Features of the rubber oil packer cups:
1) Specify differential pressure, temperature and fluid composition.
2) Match the replacement to the approved tool and part revision.
3) Confirm finished dimensions and tolerances from the drawing.
4) A requested 150°C (302°F) pressure test needs agreed compound, fixture and acceptance limits.
5) A 30-cycle requirement needs defined pressure range, temperature and dwell times.
6) Large cups, including a requested 30-inch diameter, require drawing and manufacturing review.
Application environment: oil, gas, gas condensate
Welcome to contact us for more information about the rubber oil packers.
| Operating Pressure | 35 MPa application requirement; confirm compound and complete assembly rating |
| Environment | oil, gas, gas condensate |
| Available Material | HNBR or NBR; FKM alternative subject to service review |
Product Description
Cup seals and compression-set packer elements require different lip or setting geometries. Provide the construction on the drawing and identify reinforcement, inserts and mounting hardware where used. Drillability and zonal-isolation performance require complete-tool confirmation.
Other relative rubber products:
Our products are widely used at all kinds of cars, machinery, home appliance, electronic products, electric appliance, stationery, computers, oil equipment, and hardware spare parts.
We also can provide oilfield rubber swab cup
The TA swab cup is a medium-duty, all-rubber variable lip cup that offers greater flexibility under lighter loads.
The MV swab cup is a light-duty, all-rubber cup with multiple flexible, upturned lips for sand-laden fluid applications. Confirm tool and tubing fit before selection.
The V swab cup is a ring-type, single-lip, flexible, all-rubber cup molded on a steel bushing. It is ideal for lifting sand-laden fluids and for light-load swabbing. It is a single version of the MV swab cup.
The TUF swab cup is a flexible, synthetic rubber cup with spring steel reinforcing wires for heavy loads but is flexible enough for light or medium loads.
The UF swab cup is an all-purpose, synthetic rubber cup containing strong, flexible spring steel reinforcing wires.
The J swab cup is a durable, heavy-duty cup with a long, flexible lip and strong steel reinforcing wires which provide a good upstroke seal for lifting heavy loads.
The GW swab cup is a heavy, flexible, single-lip cup reinforced by spring steel wire. The oversized lip creates a good upstroke seal.
Moulded Rubber Products
Rubber Bonded with Metal Products
Extruded Rubber Products
Packing and shipping
1: Express: S.F. ,DHL,UPS, TNT, FedEx ect, for urgent and small order.
2: Air shipment: air port to air port , or air port to door.
3: Sea shipment: suitable for bulk goods. it will takes more longer time than air shipment.
Our company
Shanghai Qinuo Industry Co. Ltd
was established in 2003, is a new and high-tech enterprise integrating R&D, production and sales. Since its inception, we adhering to the "Quality for Survival, Innovation Competes For Development " concept, continuous development and innovation, we won a good reputation at home and abroad.
Our company provides professional plastic parts, rubber parts and maching parts design and production services, products mainly used in automobiles, household appliances, machinery equipment and oil industry and other fields. We have a professional production and sales team, "High-Quality, High Professionalism, High Efficiency" are the principles of doing things.
We have two factories, more than 30 injection molding machines, molding machines and CNC lathes. Our company is located in Pudong New Area, Shanghai. Elegant environment, convenient transportation, Only need 30 minutes from our company to Pudong Airport.
Our ISO 9001 quality management system supports manufacturing quality control. Specify material documentation, dimensional inspection and additional compliance requirements with the order.
The steps of the production:
FAQ
1. How is a replacement element identified?
Provide the tool model, part number and approved drawing revision.
Include photographs and an original sample where available; identify wear and deformation on used parts.
2. What dimensions need confirmation?
a. Finished outside and inside diameters.
b. Overall height or element length.
c. Lip profile or compression-setting geometry.
d. Mounting interfaces and support dimensions.
e. Reinforcement and insert details where used.
f. Mating bore diameter and condition.
g. Tolerances and required inspection points.
3. What material data is needed?
1. Specified HNBR or NBR compound and hardness.
2. Fluid composition and additives.
3. Continuous and peak temperatures.
4. Pressure cycles and decompression conditions.
5. Required qualification and test documentation.
4. What should accompany the order?
1. Approved drawing or sample reference.
2. Quantity and part identification.
3. Dimensional and surface acceptance criteria.
4. Required material and test records.
5. Packaging and handling requirements.
For oil-well replacement packer elements, send the tool and part revision, actual dimensions and operating envelope for geometry and compound review.
Custom parts can be reviewed from drawings or original samples; agree material, geometry and inspection criteria before production.
Welcome to contact us for more information.
Related molded, bonded and extruded rubber parts can be reviewed separately from the oil-well packer element specification.
Moulded Rubber Products
Rubber Bonded with Metal Products
Extruded Rubber Products
Packing and shipping
1: Express: S.F. ,DHL,UPS, TNT, FedEx ect, for urgent and small order.
2: Air shipment: air port to air port , or air port to door.
3: Sea shipment: suitable for bulk goods. it will takes more longer time than air shipment.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.