Customized Y Type FIG 1502 NBR HNBR Plug Valve Seals

Custom Y-Type Plug Valve Seals - NBR and HNBR for Specified FIG 1502 Assemblies

Custom Plug Valve Seal Selection Product Data Sheet

Plug valve seal and kit pictures for reference - custom dimensions and kit contents require an agreed drawing

Other products from us:

Hammer union seals: 

All available Hammer Union seals list :

1" HAMMER UNION LIP SEAL RING, BUNA

1-1/2" HAMMER UNION LIP SEAL RING, BUNA

2" HAMMER UNION LIP SEAL RING, BUNA

3" HAMMER UNION LIP SEAL RING, BUNA

1" HAMMER UNION LIP SEAL RING,

1-1/2" HAMMER UNION LIP SEAL RING,

2" HAMMER UNION LIP SEAL RING,

3" HAMMER UNION LIP SEAL RING,

2" HAMMER UNION SEAL RING, BUNA W/ BRASS BACKING

3" HAMMER UNION SEAL RING, BUNA W/ BRASS BACKING

4" HAMMER UNION SEAL RING, BUNA W/ BRASS BACKING

2" HAMMER UNION SEAL RING, W/ BRASS BACKING

3" HAMMER UNION SEAL RING, W/ BRASS BACKING

4" HAMMER UNION SEAL RING, W/ BRASS BACKING

2" HAMMER UNION SEAL RING, BUNA W/ STAINLESS STEEL BACKING

3" HAMMER UNION SEAL RING, BUNA W/ STAINLESS STEEL BACKING

4" HAMMER UNION SEAL RING, BUNA W/ STAINLESS STEEL BACKING

Swab cups:

All Available types of Swab cups:
TA-style swab cups are a separate fluid-lifting product range. Specify tubing size, bushing configuration, load and material requirements.
MV-style swab cups use a multi-lip profile. Confirm the selected configuration against tubing dimensions and fluid conditions.
V-style swab cups are listed separately for swabbing applications. Provide sand and load requirements for selection.

Specify fluid chemistry, temperature and abrasion requirements when selecting swab cup material.
TUF-style swab cups use internal reinforcement. Match the configuration to tubing condition and operating load.
NUF-style swab cups are a separate heavy-load range. Confirm tubing size, bushing and service requirements before ordering.

Rubber o rings or kits

For AS568 O-rings, specify dash number, compound and hardness. Custom metric rings require inner diameter, cross-section and tolerances.

Specify color, hardness and packing requirements with the drawing.

Other oil field rubber and plastic fittings:

Rubber puckers

Thread protectors

Flow tubes

Ect.

For custom Y-type plug valve seals, provide the valve model, FIG reference, component drawing and quantity. Include NBR or HNBR compound, hardness, backing, fluid and temperature requirements. Confirm any kit contents separately. A connection figure or nominal size alone does not establish seal interchangeability or a pressure rating.