Hydraulic Aluminum Steel Coil Metal Slitting Line 40Cr Knife Pivot Material
Hydraulic Aluminum Steel Coil Slitting Line Rolled Steel Sheet Slitting Machine
Product introduction
Weight of middle thick steel coils usually with weight up to about 30Tons, in this case, double mandrel uncoiler is necessary to load so heavy coils. Double mandrel decoiler can be made to three steps respectively for three kinds of international standard inner diameter coils Φ508mm, Φ610mm, Φ760mm. At the same time, Double mandrel decoiler can made to be double cones without steps that can support and decoil a wide range of different ID coils from Φ480-800mm for the special steel slitting machine.
Process Flow:
| Model No. | RS 1.0-6.0 | RS 2.0-8.0 | RS 3.0-10.0 | |
| Coil Material | CR Coils , HR Coils, S.S Steel Coils, GI Coils , AL Coils, Copper Coils Picking Oil Coils | |||
| Coil Thickness | 1.0～6.0mm | 2.0～8.0mm | 3.0～10.0mm | |
| Line Speed | 0～110m/min | 0～50/80m/min | 0-30/50m/min | |
| Coil Weight | ≤30T(35T) | ≤30T(35T) | ≤30T(35T) | |
| Coil I.D | Φ508,φ610,φ760mm | Φ508,φ610,φ760mm | φ508,φ610,φ760mm | |
| Coil O.D | ≤φ2200mm | ≤φ2200mm | ≤φ2200mm | |
| Strip Width | ≥30mm | ≥50mm | ≥70mm | |
| Number of Strip | 4～15 | 5～20 | 5～18 | |
| Slitting Accuracy | ±0.3mm | ±0.3mm | ±0.3mm | |
| Blade shaft | Ф260mm | Ф280mm | Ф300mm | |
| Electrical Control System | PLC Automatic control | PLC Automatic control | PLC Automatic control | |
Metal Slitting Line Main Technical Specifications
| COIL/ROLL DETAILS | Material | HR, CR, SS, GI, PPGI, Copper |
| Tensile Strength | δb≤600Mpa,δS≤360Mpa | |
| Coil/Roll thickness | 1-10mm | |
| Steel Coil/Roll width | 500-2200(Max) | |
| Coil/Roll I.D | Φ500-760 mm | |
| Coil/Roll O.D | Φ2000mm(Max) | |
| Steel Coil/Roll Weight | 35T(Max) | |
Slitter parameters |
knife pivot diameter | Ф220 mm |
| Knife pivot material | 40Cr | |
| Blades specification | Φ220mmXφ360mmX20mm | |
| Blade material | 6CrW2Si | |
| Max slit quantity | 4 pcs (4mm) 20 pcs(1mm) | |
| Width precision | ≤±0.05mm | |
Other parameters |
Power | 380V/50Hz/3Ph(Customized) |
| Line speed | 0-80m/min | |
| Capacity | 360 KW | |
| Whole line Dimension | 45m(L)X10m(W) | |
| Line direction | From right to left(Face to machine) |
Our Services
1) We will send the engineer for the installation and training your workers how to operate this machine in correct way.
2) Warranty Team
One year quality guarantee, life guarantee repair. Within quality guarantee period, except for failures caused by human error, repair parts will be provided for free. After the quality guarantee period, only charge the cost of the spare parts.
3) We supply the pre-sell and after-sell service.
pre-sell service: workshop design, and production output design
after-sell service: installation and training, and the skilled engineer for working.
4) We can also sent the engineer working for you serval months or 1 year. The engineer will help you to improve the output, reduce the waste and decrease the cost.
5) We supply the pre-sell service-Design for whole project for stainless steel pipe making/ carbon steel pipe making.
6) We will be responsible for the loading and shipping
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.