Sensor Integration Light Sensing LTE CAT.1 Microwave Linkage Dimming Output Mode Is 0-10V
Price:
negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Brand:
LongJoin
Product Description
JL-712G3L Light-Sensing LTE CAT.1 Microwave Linkage Dimming Controller
Product Overview
The JL-712G3L single lamp intelligent controller adopts LTE CAT1 wireless communication with light sensing and microwave sensing capabilities. It supports local wireless linkage function and continues to operate when network is disconnected. The dimming output mode is 0-10V and can be managed remotely using our UM9900 management system. This product is designed for detecting pedestrians and low-speed vehicles under 20km/h.
Product Dimensions
Product Features
- ZHAGA standard interface
- LTE Cat.1 communication
- Synergia Modes Remote Configuration
- Motion sensing up to 15m height
- Synergying coverage up to 1km
- Anti-malfunction for outdoor purpose
- Self-cycling prevented
- LED Decay compensation built-in
- Multi-sensing Strategy
- Fault Diagnosis & Report
- MQTT Server Online Migration Support
Technical Specifications
| Power Supply | Rated voltage: 12~24VDC, 3W. Recommended transient current response capacity: 1A |
|---|---|
| Average Power Consumption | 1.2W |
| Dimming Interface | Type: 0~10V, Accuracy: ±2%, Drive Current: 20mA (Typical) |
| Communication | LTE+Sub-G |
| Spectral Acquisition Range | Range: 0.01~64000Lux, Accuracy: ±2%, Wavelength: 350~1100nm, Peak wavelength: 550nm |
| Turn on Illuminance | 100Lux (±10) |
| Turn off Illuminance | Reflected light + 40Lux (±10) after each turn on. Lower limit: 50+40Lux (±10); Upper limit: 6000Lux (±100) |
| Reflected Light Compensation Upper Limit | 6000Lux (±100) |
| Microwave Parameters | Frequency: 5.8 GHz, Supported hanging height: <15m, Sensing radius: 4-6 meters, Sensing angle: <92° |
| Linkage Distance | ≤1km |
| Default Tiny Brightness | 20% |
| Default Tiny Light Maintenance Duration | Permanent |
| Default Trigger Brightness | 100% |
| Default Trigger Brightness Maintenance Duration | 30S |
| Default Maximum Power Ratio | 80% |
| Sensing Radius | 4-8m (by 15m hanging height) |
| Initialization Action | After startup, light turns on at 100% brightness by default, taken over by device operation mode after 5S |
| Lamp on Delay | 10S |
| Lamp off Delay | 10S |
| Duration of Microwave Induction Light On | Default 30S (platform adjustable) |
| Microwave Error Prevention Trigger | Possesses ability to prevent wind, rain, leaves, and small animals interference |
| Trace Brightness | Default 20% (platform adjustable) |
| Slightly Bright Duration | Default permanent (platform adjustable) |
| Network Protocol | MQTT |
| SIM Card | Cato plug-in type, Supports 1.8V USIM cards, NANO package |
| Remote Upgrade | Supports OTA |
| Green LED Indicator Light | Always on: Successfully connected to base stations |
| Blue LED Indicator Light | Blinking: Connecting to server, Always on: Successfully connected to server |
| Default Periodic Reporting Frequency | 10 minutes |
| Energy Saving Strategy | Custom |
| Electrostatic Discharge Immunity | Contact discharge: ±8kV, CLASS B; Air discharge: ±15kV, CLASS B |
| Operating Temperature | -40℃~70℃ |
| Storage Temperature | -40℃~85℃ |
| Operating Humidity | 5%RH~96%RH |
| IP Level | IP66 |
| Structural Material | Foundation bed: PBT, Shell: PC |
| Standard | IEC61000-4-2, GB/T2423.10-2008, UL94-V0 |
| Certifications |  |
Frequently Asked Questions
What is the Sensor Integration Light Sensing LTE CAT.1 Microwave Linkage Dimming controller with 0-10V output?
It is an intelligent lighting controller integrating light sensing, LTE CAT.1 communication and microwave detection, supporting linkage dimming with 0-10V signal output for intelligent outdoor lighting control.
What is the function of light sensing and microwave linkage in this controller?
Light sensing judges ambient brightness, microwave detects moving people or vehicles, and the two work together to realize automatic on/off and dimming, achieving high efficiency and energy saving.
What role does LTE CAT.1 play in this integrated sensor controller?
LTE CAT.1 provides stable cellular network communication, supporting remote control, real-time status feedback, fault reporting and cloud management of lighting equipment.
Why is the dimming output mode designed as 0-10V?
0-10V is a universal and stable dimming signal, compatible with most LED drivers, realizing smooth stepless dimming and easy deployment in various lighting systems.
What are the core advantages of this multi-sensor integrated controller?
It integrates multiple functions in one unit, supports intelligent linkage and remote management, improves control accuracy, reduces wiring complexity and lowers overall operation cost.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shanghai Long-Join Intelligent Technology Inc
Location
2/F, Building 8, Donlin Technology Park,No.129 Hulan(W.) Road, Baoshan District, Shanghai , China
Contact Person
Bella