ZHAGA Controller Light Sensing + Microwave DALI2.0 Infrared Remote Control Roads Lawns
The JL-722A2H light controller is a smart latch-type controller developed based on the Zhaga Book-18 interface standard. It combines light sensing and microwave sensing sensors, outputs DALI dimming signals, and supports infrared remote control for parameter configuration. Ideal for roads, lawns, courtyards, parks, parking lots, factories, and warehouses.
Working Logic: When illumination requirements are met, the lamp operates at slightly bright brightness and starts a countdown. If motion is detected, the lamp becomes fully bright. After motion detection ends, a full-bright countdown begins, then returns to slightly bright mode. The lamp turns off when the slightly bright countdown ends or illumination conditions change.
- 12-24VDC auxiliary source or DALI bus power supply with low power consumption
- Zhaga Book-18 interface standard compatibility
- DALI2.0 protocol support
- Dynamic microwave frequency adjustment to prevent interference in dense installations
- Compact size: Φ50.4 × 35mm for various lighting fixture installations
- Light sensitivity + microwave sensing for on-demand lighting and energy efficiency
- Visible light filtered photosensitive sensor
- High-performance microwave with 15m hanging height and ≥10m induction radius
- Infrared remote control capability
- IP66 rated for outdoor use
| Power Supply | AUX Power: 12-24VDC (12V/35mA; 24V/25mA) DALI Bus Powered: 30mA |
|---|---|
| Power Dissipation | <0.385W (12V); <0.55W (24V) |
| Dimming | DALI |
| Sensors | Light sensitivity + microwave |
| Spectral Range | Wavelength: 800-1100nm |
| Microwave Frequency | 5.8GHz |
| Maximum Hanging Height | 15 meters |
| Induction Radius | ≥10 meters |
| Start-up Time | <200ms |
| Power On Initialization | Default 5s turn-on (gradient) then operates based on parameter settings |
| Sensitivity | Default 80%, adjustable via IR |
| Hold Time | Default 30S, adjustable via IR |
| Stand-by Dim Level | Default 0%, adjustable via IR |
| Stand-by Period | Default infinite, adjustable via IR |
| Turn On Illuminance | Default 50lux, adjustable via IR |
| Turn Off Illuminance ∆ Value | Default ∆ 50lux, adjustable via IR |
| Turn Off Illuminance | Turn On Illuminance + Turn Off Illuminance ∆ Value |
| Maximum Power Ratio | Factory default 100%, adjustable via IR |
| Mechanical Vibration | IEC60068-2-6 |
| Flammability Level | UL94-V0 |
| Operating Temperature | -40℃ to +70℃ |
| Storage Temperature | -40℃ to +85℃ |
| Operating Humidity | 5% RH to 99% RH |
| IP Level | IP66 |
| Certifications | CE, ZHAGA, D4i, DALI2.0, ROHS |
A: It is an intelligent lighting controller compliant with ZHAGA standards, integrating light sensing and microwave detection, supporting DALI 2.0 dimming and infrared remote control, suitable for roads and lawns.
A: ZHAGA standard ensures high compatibility, standardized connection, waterproof and reliable performance, enabling easy installation and replacement on LED street lights and outdoor luminaires.
A: Light sensing controls lighting based on ambient brightness, while microwave detects moving objects; the dual system achieves high-precision automatic control and effective energy saving.
A: DALI 2.0 supports digital dimming, bidirectional communication, stable signal transmission, precise brightness adjustment and real-time status feedback for intelligent lighting systems.
A: It is widely used in road lighting, lawn lighting, garden lights, courtyard lighting and other outdoor public lighting scenarios.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.