Light Sensing American Z10 Interface Roads Lawns Courtyards Parks Parking Lots
The JL-772A2H light controller is a smart latch type controller developed based on the Z10 interface. It combines light sensing and microwave sensing sensors, outputs 0-10V dimming signals, and supports infrared remote control for parameter configuration. Suitable for lighting scenarios including roads, lawns, courtyards, parks, parking lots, factories, and warehouses.
The controller operates by maintaining slightly bright illumination when ambient light is sufficient, starting a countdown timer. When motion is detected, the lamp switches to full brightness. After motion detection ends, a full-brightness countdown begins, then returns to slightly bright mode. The lamp turns off when the slightly bright countdown ends or when illumination requirements are met.
- 12-24VDC power supply with low power consumption
- Standard Z10 interface compatibility
- 0-10V dimming mode
- Dynamic microwave frequency adjustment to prevent interference in dense installations
- Compact size: Φ50.4 × 35mm, suitable for various lighting fixtures
- Light sensitivity + microwave sensing for energy-efficient on-demand lighting
- Visible light filtered photosensitive sensor
- High-performance microwave with 15m hanging height and ≥10m induction radius
- Infrared remote control capability
- IP66 weatherproof rating
| Power Supply | Voltage: 12-24VDC Current: 12V/35mA; 24V/25mA |
|---|---|
| Power Dissipation | <0.385W (12V); <0.55W (24V) |
| Dimming | 0-10V |
| Sensors | Light sensitivity + microwave |
| Spectral Range | Wavelength: 800-1100nm |
| Microwave Frequency | 5.8GHz |
| Maximum Hanging Height | 15 meters |
| Induction Radius | ≥10 meters |
| Power On Initialization | Default 5s gradient turn-on, then operates based on parameter settings |
| Sensitivity | Default 80%, adjustable via IR |
| Hold Time | Default 30s, adjustable via IR |
| Stand-by Dim Level | Default 0%, adjustable via IR |
| Stand-by Period | Default infinite, adjustable via IR |
| Turn On Illuminance | Default 50lux, adjustable via IR |
| Turn Off Illuminance ∆ Value | Default ∆50lux, adjustable via IR |
| Turn Off Illuminance | Turn On Illuminance + Turn Off Illuminance ∆ Value |
| Maximum Power Ratio | Factory default 100%, adjustable via IR |
| Transition Times | Off → Stand-by: 0.1s Stand-by → 100%: 0.1s 100% → Stand-by: 8s Stand-by → Off: 1s |
| Mechanical Vibration | IEC60068-2-6 |
| Flammability Level | UL94-V0 |
| Operating Temperature | -40℃ to 70℃ |
| Storage Temperature | -40℃ to 85℃ |
| Operating Humidity | 5% RH to 99% RH |
| IP Level | IP66 |
| Certifications | CE, ROHS |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.